{"publication":{"abstract":"The following is the outcome of just under a year’s work, carried out under a research contract that called for “a conceptual and exploratory investigation into the potential for protein fibers to perform computational, sensing, or information-encoding functions.” The grandest ambition envisioned at the outset was a set of clear and complete designs for protein-fiber-based devices. After some seven months of poring over the literature, attempting various analytic routes, and occasionally running into dead ends left by gaps in the experimental record or in my own capacities, the final product is rather closer to a partial map of the larger landscape, punctuated throughout by hypotheses, speculations, and design principles. My hope is that the document serves as a jumping-off point for the great deal of work that remains.\n\nThe structure of the document is as follows. Chapter [%s](#ch:introduction) lays out a common framework to discuss sensing, transduction, sets out general operating constraints, and closes with a general discussion of protein-based design. Chapter [%s](#ch:trans) treats transduction, primarily passive, through a minimal fiber model (§[%s](#ssec:viscopiezo)), a survey of couplings native to protein fibers (§[%s](#sec:survey), expanded in Appendix [%s](#app:survey)), a discussion of figures of merit, bandwidth, and impedance matching (§[%s](#sec:IOmetrics)), and a case study of texture sensing (§[%s](#ssec:pacStudy)). Chapter [%s](#ch:RC) develops physical reservoir computing as an unconventional modality that may be realizable in protein-based systems, from theory through measurement protocols, material implementation, and open challenges.\n\nMost of the work is yet to be done, and the great majority of it must be experimental. Candidate fibers need to be characterized in the terms the models require. This includes the attainable ranges of the coupling coefficients of Appendix [%s](#app:survey), relaxation spectra, the drive amplitude at which response becomes nonlinear, the uniformity of these properties across ostensibly identically constructed devices, and their drift with temperature, hydration, and age. Morphology is left entirely open. The corpuscle model of §[%s](#ssec:pacStudy) presents one possible design, but whether a layered capsule with the same properties can be fabricated partially or entirely from protein fibers, and how finely those properties can be tuned, remains to be seen. The physical reservoir computing proposal of Chapter [%s](#ch:RC) also leaves open many questions about morphology and measurement. Many sensors embedded in a synthetic skin is the picture this document hints towards, but a bare mat, a web-like network under pretension, or something very different may serve better. The fading memory and information-processing capacity of a proposed physical reservoir (defined in §[%s](#ssec:fadingMemory)–[%s](#ssec:capacity), with measurement protocols in §[%s](#ssec:estCapacity)–[%s](#ssec:measFM)) offer one basis for choosing among reservoir morphologies and readout designs. The analyses of this document also suggest a number of directions for theoretical work. The visco-piezoelectric model of Appendix [%s](#app:viscopiezo) is one-dimensional and weakly nonlinear, and as constructed it has a single observable and so cannot act as a physical reservoir (as shown in §[%s](#ssec:visco2)). The model of Appendix [%s](#app:caseStudy) rests on a biological understanding that has since shifted, and there is room to revisit it. Further extending the model to a spatially extended, coupled medium could populate the field formulation of §[%s](#ssec:physForm) with the constitutive physics of an actual system, so that the electrode integrals of Eq. [(%s)](#eq:instrProfile) could be evaluated on a real strain field, and readout placement could be treated as a design variable in a reservoir-sensing artificial skin platform. Impedance is treated as a lumped-element concept in §[%s](#ssec:bandImp), and a treatment suited to nonlinear, spatially inhomogeneous, time-varying media would permit further elaboration and analysis of the preliminary sketches of multi-stage devices in §[%s](#sec:composition).\n\nWhether a protein fiber-based device can be made to compute in any of the senses developed here remains firmly open. This document offers a vocabulary, a set of models, and clearer idea of what must be measured next. Underlying all of it is a synthesis of several hundred sources across materials science, thermodynamics, mechanobiology, and reservoir computing.\n\n**Acknowledgements.** This work was financially supported by Speculative Technologies, and was done in collaboration with the Impossible Fibers Lab at Astera Institute, and Impossible Fibers, Inc. I thank Matthew Leighton for constructive feedback on the manuscript, and Wade Ingram for numerous helpful discussions on the lab’s activities. Special thanks are owed to Tim McGee, who provided continuous support and insight over many productive conversations throughout the process.\n\nJordan Sawchuk \\\n&#x20;*Vancouver, September 2026*","body":"+++\n\n(ch:introduction)=\n## Computation in Physical Systems\n\n+++\n(sec:physcomp)=\n### Physical computation\n\n> “*The proper domain of computer science is information processing writ large across all of nature.*” – Chris Langton, in *Complexity: A Guided Tour* by Melanie Mitchell {cite:t}`mitchellComplexityGuidedTour2009`\n\nThis document explores opportunities and obstacles for protein fiber-based computational devices, in a deliberately broad sense of the word “computational”. This covers a range of ambitions from strictly auxiliary roles (e.g. as a transducer or a sensor) up to intrinsic computation. Most attention is given to the space between these limits, in which the device performs a nontrivial but bounded piece of computational labor. The boundaries between these roles are not sharp, so we must first address a very elementary (but quite challenging) question: **When is a physical process a computation?**\n\nThis question is the subject of a live debate, but the aim here is entirely operational. To avoid the antipodal traps of digital-logic myopia on one hand and pancomputationalism[^JDs5ftEFyk] on the other requires an expansive yet structured perspective on computation. What is required is a kind of dictionary between the language of *physics and physical processes* and the language of *computers and algorithms*.\n\n#### The abstraction/representation framework\n\nIn the Abstraction/Representation (AR) framework,{cite:t}`horsmanWhenDoesPhysical2014,Horsman-2018-art,stepneyRepresentationalEntityPhysical2021` a physical process becomes a computation when it is used to predict the outcome of an abstract transformation. To motivate the idea, consider the famous example of a slime mold solving a maze, here adapted from Horsman et al.{cite:t}`Horsman-2018-art`. If one wants to know the shortest path between two points {math}`x_1` and {math}`x_2` in an idealized maze, one could build a physical maze with food sources placed at the physical images of the two points and let the slime mold *Physarum* grow through it. The organism’s final body shape will trace the solution in the physical maze, from which the abstract answer can be read off. This set-up involved the instantiation of an abstract object (the maze) in a physical system, the evolution of that physical system, and then the measurement and interpretation of the system’s final state as an answer to the question posed. The links between the physical and abstract domains are the essential objects of the AR framework of computation.\n\nThis picture is sharper when expressed symbolically. Let {math}`\\mathcal{P}` be the physical domain and {math}`\\mathcal{M}` the abstract domain. Then a *representation relation* {math}`R` and its reverse (instantiation) {math}`R^+` are maps between a physical system and an abstract domain:[^xgqcKS8P90]\n\n```{math}\n\\begin{split}\n        R &: \\mathcal{P} \\to \\mathcal{M} \\\\\n        &: p \\mapsto m_p\n    \\end{split} \\ ,\\qquad\\qquad \n    \\begin{split}\n        R^+ &: \\mathcal{M} \\to \\mathcal{P} \\\\\n        &: m_p \\mapsto p\n    \\end{split} \\ \\ .\n```\n\nHere {math}`m_p \\in \\mathcal{M}` is the abstract state represented by the physical state {math}`p\\in\\mathcal{P}`. In the maze example, {math}`\\mathcal{M}` is the space of idealized mazes, paths, and points, physically instantiated in {math}`\\mathcal{P}` as real mazes, slime molds, and food sources.\n\n:::{figure} https://thestacks-01.s3.amazonaws.com/publications/01M75CABVGH3G9RJZ60XNHCRJF/media_d0dd0251db6bbd86658bccbc28bc0e3b0f1af56ef4181dd9327a7f126a1e76d1.svg\n:name: fig:ARmap\n:align: center\n\nMaps among the abstract and physical domains in the abstraction/representation framework. Based on Fig. 2 from Dale et al. in Ref.{cite:t}`nakajimaReservoirComputingTheory2021`.\n:::\n\nEach domain has its own internal evolution. In the abstract domain this is an idealized map {math}`C:\\mathcal{M} \\to \\mathcal{M}` carrying the problem to its correct answer, {math}`C(m_p) = m'_p`. In the physical domain it is the dynamics {math}`H: \\mathcal{P} \\to \\mathcal{P}`. See Fig. [%s](#fig:ARmap). The device is a *good* computer (with respect to the representation relation and the specific problem instance) when the abstract representation of the final physical state {math}`m_{p'} = R(p') = R(H(R^+(m_p)))` is close to the correct answer {math}`m'_p = C(m_p)`, i.e., when the diagram [%s](#fig:ARmap) *commutes* within some specified tolerance {math}`\\epsilon`:\n\n```{math}\n:label: eq:ARframework\n\nR\\circ H \\circ R^+ \\approx C \\qquad  \\iff \\qquad \\| m_{p'} - m'_p \\| < \\epsilon \\ .\n```\n\nIn words,\n\n```{math}\n\\text{instantiation $\\to$ physical evolution $\\to$ measurement \\& interpretation} \\ \\approx \\ \\text{problem $\\to$ solution} \\ .\n```\n\nA computer is (Turing) universal if *every* computable abstract evolution {math}`C` can be expressed as a composition of primitives for which the diagram of Fig. [%s](#fig:ARmap) commutes.{cite:t}`horsmanWhenDoesPhysical2014` In a universal machine, commutation is established once, after which the same physical system can be trusted with any computable problem (complexity and resource constraints aside). This is a powerful and rather strict property, but it is not required. A non-universal computer is simply one whose validated diagrams cover a restricted family of problems, and wise operation consists in aligning a physical substrate with the problems it happens to answer well.\n\nConventional computation populates the same diagram with very different physics than the slime mold.{cite:t}`Horsman-2018-art` For the former, the problem {math}`m_p` is encoded in binary, perhaps compiled from a high-level language; instantiation {math}`R^+` initializes the hardware through the full engineering stack (Boolean logic in the transistors, the von Neumann architecture, and so on); the physical evolution {math}`H` proceeds by transistor switching and the charging and discharging of gate capacitances; and {math}`R` decodes the final hardware state into the result {math}`m_{p'}`. The tolerance {math}`\\epsilon` absorbs the residual error, e.g. from floating-point round-off. Commutation has been verified compositionally, gate by gate, and computation is universal.\n\nFor the slime mold, commutation rests on the empirical observation that *Physarum*, grown in a two-dimensional domain with obstacles and two food sources, tends to form a minimum-length body connecting them. The minimization is approximate and stochastic, so some error is unavoidable. The slime mold illustrates several ways unconventional computation diverges from the classical picture:\n\n1.  Hardware, software, and input data cannot be cleanly distinguished: the maze is at once the machine and the question. This renders much vocabulary from conventional computing inapplicable.\n\n2.  The computation is *consumptive*: the organism-maze system answers the question once. Unlike a chip that executes billions of operations before retirement, the cost of construction and programming cannot be amortized over a virtually unbounded number of runs. Other physical computing devices may lie between these extremes. Whether this is a defect or not depends on the application. In implantable biosensors, for instance, one might require a limited lifespan terminated by natural degradation into non-toxic byproducts.\n\n3.  The slime-mold maze solver is *non-universal* in the extreme, with the validated diagram covering exactly one family of problems.\n\nIn summary: a substrate computes only relative to maps between the physical domain and an abstract problem space, and these maps must be specified and validated in advance. A physical computer may be non-universal, and this may be the far more likely case. Finally, a computer is only *useful* if the user can trust that the diagram commutes for problems whose abstract solutions are not known in advance.\n\n(ssec:io)=\n#### Dynamical variables and the I/O map\n\nIn any real device, the maps {math}`R, \\ R^+` must be realized physically by *writing to* and *reading from* particular degrees of freedom of the substrate. For the purposes of model-building, fix a small set of general variables:\n\n*   {math}`\\u(t)` - dynamical inputs: the channel through which the environment or an upstream element drives the device during operation;\n\n*   {math}`\\x(t)` - internal state variables of the device;\n\n*   {math}`\\y(t)` - outputs, whether measured or passed directly to a downstream element;\n\nThese specialize the framework of the previous sections to a concrete input/output (I/O) map:\n\n```{math}\n:label: eq:IOmap\n\n\\u(t) \\xrightarrow{\\qquad} \\x(t) \\xrightarrow{\\qquad} \\y(t) \\ .\n```\n\nRoughly,[^kSbW0SEsBc] the operational content of the instantiation {math}`R^+` is roughly the preparation of {math}`\\x` through {math}`\\u` (and perhaps adjustment of other material parameters); the evolution {math}`H` generates the trajectory {math}`\\x(t)`, determined by the physics of the device; and the representation {math}`R` is realized by the readout {math}`\\y` together with its abstract interpretation. For example, {math}`\\u` might be a force applied to a piezoelectric mat whose polarization state {math}`\\x` is read off by a voltage {math}`\\y` developed across the mat. Framing every device in this way puts sensing, transduction, and computation on the same footing. The difference between them lies, at least in part, in the richness of the map {math}`\\u \\mapsto \\y`.\n\n#### Accessible and information-bearing degrees of freedom\n\nThe physical part of the maps {math}`R^+` and {math}`R` acts primarily through {math}`\\u`, {math}`\\y`, and the material parameters governing their coupling to {math}`\\x`. These collectively form a narrow window onto the full state {math}`\\x`, so not every feature of the substrate is *accessible* for computation. Nor is every feature *relevant*. The **information-bearing degrees of freedom** (IBDF) are the physical degrees of freedom that carry the computation[^p9TF6ZBgdY].\n\nThe connection to the representation relation can be made precise. Physical states that agree on their IBDF define equivalence classes, and the quotient of the physical space by IBDF-equivalence is mapped one-to-one onto abstract states.{cite:t}`maclennanPhysicalFormalAspects2017` {math}`R` never needs to resolve the **non-information-bearing degrees of freedom** (NIBDF) at all, and a well-chosen representation should be blind to them.\n\nAccessibility and relevance are independent axes. In reservoir computing, the subject of Ch. [%s](#ch:RC), the great majority of the IBDF are individually inaccessible as the readout is a finite-dimensional, discrete observation of the substrate’s macroscopic behaviour.{cite:t}`nakajimaReservoirComputingTheory2021` Rather, {math}`\\y` is required to be an adequate projection of the IBDF retaining enough content to reconstruct the answer (in favorable cases, a *sufficient statistic*) to within tolerance. The NIBDF manifest as heat and noise and must be managed in aggregate to keep them from interfering with the computation.\n\n+++\n(sec:noise)=\n### Noise & Robustness\n\nMany of the devices contemplated in this document are warm, wet, and small. At physiological temperatures {math}`T\\approx 310\\,\\mathrm{K}`, the thermal energy scale is {math}`k_B T \\approx 4.1\\,\\mathrm{pN\\cdot nm}`, comparable to the conformational energy differences that distinguish one functional state of a protein from another.{cite:t}`nationalacademiesofsciencesengineeringandmedicinePhysicsLife2022` Under these operating conditions, thermal noise is a zeroth-order feature of the operating environment which should not be treated as a small perturbation on otherwise deterministic dynamics.{cite:t}`bennettThermodynamicsComputationReview1982`\n\nThe phenomena that degrade performance broadly operate on two timescales. **Noise** refers to rapid stochastic fluctuations entering at every stage of the map [(%s)](#eq:IOmap). The most problematic source of noise depends on the device and its function, and solutions to noise may come with a trade-off. A poled piezoelectric element, for instance, is also pyroelectric, and the influence of ambient temperature fluctuations is indistinguishable from that of mechanical signals. The standard remedy of a subtracting pair of elements to cancel the thermal channel comes at the cost of a second element (§[%s](#ssec:FoM)). On longer timescales, **drift** is the systematic change of the device parameters themselves. This may occur through fatigue under cyclic load, or aging at rest, which is characteristic of sensors incorporating organic components.{cite:t}`fradenHandbookModernSensors2010` Noise blurs individual readouts of a fixed map; drift alters the map itself. In AR terms, both erode the commutation of the diagram [%s](#fig:ARmap): noise mainly by increasing the error beyond the tolerance {math}`\\epsilon`, and drift by invalidating the representation/instantiation maps established at fabrication.\n\nThe simplest figure of merit for a noisy readout is the signal-to-noise ratio (SNR). For a scalar readout {math}`y = \\angbr{y} +\\delta y` with mean {math}`\\angbr{y}` and fluctuation {math}`\\delta y`,\n\n```{math}\n\\mathrm{SNR} = \\frac{\\angbr{y}^2}{\\mathrm{Var}(y)} \\ .\n```\n\nA viable device maintains adequate SNR across its operating regime, where “adequate” is fixed by the tolerance {math}`\\epsilon` of the task the device serves.\n\n**Robustness** is the stability of the map {math}`\\u \\mapsto \\y` under perturbation. Since the physical evolution {math}`H` is usually stochastic for small devices at ambient temperature, the input history {math}`\\u\\vert_{t\\geq0}` and initial condition {math}`\\x(0)` do not fix the present state {math}`\\x(t)`. One might arrange for {math}`\\y` to report a macroscopic bulk property, so that averaging over the NIBDF yields an effectively deterministic function of the input. In CMOS electronics, for example, energy barriers {math}`\\Delta E \\gg k_B T` separate the 0 and 1 macrostates, making thermally activated errors exponentially rare. This protection diminishes as devices shrink, with barriers falling relative to thermal noise once few electrons represent a bit. For this reason, single-electron MOSFETs must be operated at cryogenic temperatures{cite:t}`pratiFewElectronLimit2012` unless robustness is recovered at the system level by other means. Consider another illustration from biology: DNA replication withstands the intrinsic noise of the crowded, warm cellular environment through high-fidelity polymerases and kinetic proofreading.{cite:t}`nationalacademiesofsciencesengineeringandmedicinePhysicsLife2022`\n\nDisorder itself may be harnessed for robustness. In melanin-like peptide fibers, broadband optical absorption and proton conduction arise from the disordered structure,{cite:t}`reddyProtonConductiveMelaninLikeFibers2020` and function that emerges from a disordered ensemble may be relatively tolerant of compositional heterogeneity and manufacturing variability. Function that requires order, on the other hand, may be more fragile. The intrinsic piezoelectricity of protein fibers (§[%s](#sec:survey) and App. [%s](#app:piezo)) scales with molecular alignment, so loss of alignment (i.e., increased disorder) over a device’s service life will degrade performance.\n\nSimilarly, noise may be a resource in its own right, e.g. as “a source of free variability” for escaping metastable minima.{cite:t}`maclennanPhysicalFormalAspects2017` *Stochastic resonance* is another example, in which noise added to a nonlinear system amplifies sub-threshold signals, so that detection performance is maximized at a nonzero noise intensity.{cite:t}`krishnaImprovedSignalDetection2025` The effect is observed in biological sensory systems, where it appears to help organisms register faint stimuli.{cite:t}`mossStochasticResonanceSensory2004`\n\nSoft matter systems are typically *soft*, so protein-fiber devices are liable to mechanical damage. Reported lifespans vary widely: a fish-collagen electrostriction sensor reportedly survived more than {math}`75{,}000` cycles over three months with no measurable degradation,{cite:t}`ghoshSustainableEnergyGeneration2017` whereas an electrospun silk/conducting-polymer actuator built by another group lost most of its per-cycle output within a day.{cite:t}`severtMimickingMuscleFiber2017` The ability of biological systems to perform remarkable physical feats with these materials may reflect their metabolic capacity to self-repair. Engineered self-healing has recently been demonstrated in an electroluminescent fiber that recovered roughly {math}`98.6\\,\\%` of its luminance and remained stable over ten months after being completely severed.{cite:t}`fuSelfhealingActuatableElectroluminescent2024`\n\n+++\n(sec:thermo)=\n### Thermodynamic and resource constraints\n\nComputation is, of course, bound by the laws of physics. Landauer’s bound is a foundational result which states that, independent of computational modality, irreversibly erasing one bit of information carries an unavoidable free energy cost of {math}`k_B T \\,\\ln2` (about {math}`0.018\\text{ eV}` at {math}`T\\sim 310\\text{ K}`), dissipated as heat.{cite:t}`landauerIrreversibilityHeatGeneration1961` Though elegant and universal, Landauer’s bound is not the binding constraint for real devices. Digital CMOS dissipates orders of magnitude above {math}`k_B T\\ln 2` per operation,{cite:t}`zhirnovLimitsBinaryLogic2003,Wolpert_2019` and neural signaling is similarly far from the Landauer bound.{cite:t}`laughlinMetabolicCostNeural1998`\n\nPotentially more relevant are the Bryant–Machta bounds concerning signal transduction.{cite:t}`bryantPhysicalConstraintsIntracellular2023` Heuristically,\n\n```{math}\n\\frac{\\text{cost}}{\\text{bit}} \\sim \\frac{(\\text{signal dissipation)}\\times(\\text{thermal noise at the receiver)}}{\\text{transmission gain}} \\ .\n```\n\nThat is, the price of reliable signaling *increases* with the signal’s tendency to decay in transit and with the noise it must overcome at the readout, and the price *decreases* with whatever gain the channel can supply. The energetic cost of sending a bit also grows superlinearly with the separation between source and receiver, and the choice of physical channel can matter greatly at very short length scales. Their estimates suggest, for instance, that acoustic signaling is several orders of magnitude more costly than electrical signaling at nanometer scales. Though the qualitative applicability of these results to the present context is somewhat limited by the assumptions on which they rest,[^HUQgHoGGFX] it is reasonable to adopt the heuristic that the conversion of a physical state into a readable signal should occur as close as possible to the actual site of sensing or actuation, with minimal structural intermediaries. In brief: transduction and readout should be physically co-located whenever possible.\n\nWith regard to a device’s energy requirements, it is useful to distinguish between passive and active materials. A **passive** material computes using its own equilibrium or near-equilibrium dynamics, drawing no sustained power. A viscoelastic network acting as a convolution filter (e.g. as discussed in Sec. [%s](#ssec:pacStudy)) performs continuous-time signal processing at zero marginal energy cost per use. The trade-off is that such a device can only offer what its relaxation dynamics afford. It has no gain, cannot sustain a state indefinitely against decay, and it cannot adapt. An **active** material is held away from equilibrium by a supply of energy (electrical, chemical, or otherwise) and this purchases gain, restoration of decayed states, adaptive reconfiguration, and self-sustained oscillations at a continuous metabolic cost.\n\nActive strategies are central to current proposals of material-based intelligence,{cite:t}`baulinMaterialBasedIntelligenceSelforganizing2025` which naturally raises the question of where the energy is to come from. Protein fibers present an opportunity in this space. Several of the transduction mechanisms surveyed in App. [B](#app:survey) (dielectric, triboelectric, and some light-coupled mechanisms, for instance) have been studied as means of scavenging power from ambient mechanical or thermal fluctuations. Eliminating the need for an active smart sensor to carry a battery vastly expands the space of possible operating environments.\n\nFinally, energy is just one of a number of **commodity resources** that must be accounted for in physical computation (e.g. mass, volume, time, precision) and a modality that seems cheap by one accounting may be ruinous by another.{cite:t}`blakeyUnconventionalComputersUnconventional2017` As a rather extreme demonstration of this, there exists a theoretical design for a DNA computer that could solve hard combinatorial path problems in a small number of steps. However, for any nontrivial problem instance, the mass of DNA required to actually perform the computation would exceed the mass of the earth.{cite:t}`hartmanisWeightComputations1995` The massive gain in parallelism simply repackages the problem’s difficulty as a material resource. More relevant (if less spectacular), improving precision tends to be much costlier in analog devices than in digital devices.{cite:t}`maclennanPhysicalFormalAspects2017` Targeting applications that tolerate low-precision computation might therefore be a sound approach.\n\n+++\n(sec:proteindesign)=\n### Opportunities and challenges in protein design\n\nThis document takes the position that a program of protein-based design for computational devices is a worthwhile pursuit. Still, we ought to keep the many challenges in full view, and take care to avoid relying on unsupported (if compelling) arguments in favor of the program.\n\nConsider the available design levers. At the smallest scale, a protein’s material properties are an expression of the sequence of amino acids, often assembled from a modest vocabulary of repeated motifs. Sequences can be written from scratch, existing sequences tweaked in small ways, or motifs can be drawn from unrelated organisms and recombined, presenting an enormous catalogue of properties.{cite:t}`miserezProteinBasedBiologicalMaterials2023,guerinDeconstructingCollagenPiezoelectricity2018,zhouMolecularMechanismPolarization2016,leeProtonicConductivityMetalloprotein2023,navarroHarnessingPrioninspiredAmyloid,beraMolecularEngineeringPiezoelectricity2021,maNovoRationalDesign2020` Even without changing the primary structure, supramolecular arrangement, comprising packing, symmetry, cross-link density, and alignment (to name a few) significantly affects the properties of assemblies.{cite:t}`guerinControlPiezoelectricityAmino2018,fu2015selfassembly-cd1,nairSelfassemblyCollagenBundles2019,gaoIntrinsicallyElasticPolymer2023,denningPiezoelectricTensorCollagen2017,negishi2012production-35d,farrarPermanentPolarityPiezoelectricity2011` The behavior of an assembly is also strongly influenced by its operating state, such as hydration, ionic environment and loading history.{cite:t}`reiterMemorizingCapacityPolymers2020,reddyProtonConductiveMelaninLikeFibers2020,bazaidElectromechanicalCouplingCollagen2023,isakovSituObservationHumidity2014` These levers are strongly entangled. Charged-residue content, for example, governs both the polarization developed under strain{cite:t}`zhouMolecularMechanismPolarization2016` and the density of proton-transfer pathways.{cite:t}`leeProtonicConductivityMetalloprotein2023` This entanglement is an opportunity and a challenge at once. Since each lever controls more than one property, trade-offs abound.{cite:t}`gaoIntrinsicallyElasticPolymer2023` Performance depends steeply on hydration, which can destabilize crystal phases and shift ionic conductivity by orders of magnitude.{cite:t}`reddyProtonConductiveMelaninLikeFibers2020,isakovSituObservationHumidity2014` In many cases, contributions are signed and subtract as readily as they add, with oriented sub-units canceling if improperly aligned. This is implicated at the level of residues{cite:t}`guerinDeconstructingCollagenPiezoelectricity2018` as well as at the mesoscale, where misalignment of active fibers can result in an inert bulk.{cite:t}`denningPiezoelectricTensorCollagen2017`\n\nA single protein or protein-fiber device can host more than one function. Silk-derived {math}`\\beta`-sheet nanostructures have been assembled into a proton-conducting membrane in which the mechanical and conductive roles are carried by the same designed sequence,{cite:t}`maNovoRationalDesign2020` and melanin-like peptide fibers combine broadband optical absorption with proton conduction.{cite:t}`reddyProtonConductiveMelaninLikeFibers2020` Synthetic examples include a simultaneously piezoelectric and mechanoluminescent fiber{cite:t}`wangIntegrationZnSMn22024` and a coaxially spun electroluminescent, magnetically actuatable, and self-healing hydrogel-clad fiber.{cite:t}`fuSelfhealingActuatableElectroluminescent2024` §[%s](#sec:thermo) argued that transduction and readout should be co-located, and this is satisfied by construction in a device whose sensing and processing elements are one and the same. Such breadth is not, by itself, distinctive. Silicon supports photovoltaic, photoconductive, piezoresistive, thermoelectric, Hall and ion-sensitive responses within a single substrate,{cite:t}`fradenHandbookModernSensors2010` with a processing maturity no biological material approaches. Rather than a greater number of effects, protein offers the possibility of generating new combinations of properties in one material, among them superior flexibility and biocompatibility.\n\nStill, in the present state of the art, functional properties like piezoelectricity tend to be weak in proteins compared to synthetic devices, and in many reports the noise floor is comparable to the signal being claimed. Measurement of soft matter systems can be difficult, and conflicts in the literature are frequent. Reported coefficients depend strongly on mounting, and outputs are often reported without normalizing to device geometry.{cite:t}`sherritCharacterizationPiezoelectricMaterials2007,vasilevPiezoelectricPropertiesDiphenylalanine2016,zhangDesignManufacturingPiezoelectric2025` Service life is largely unmeasured, and when reported at all, lifetimes are typically given as a single number based on monochromatic drive at a single amplitude.{cite:t}`ghoshSustainableEnergyGeneration2017,komolafeIntegratingFlexibleFilament2019,severtMimickingMuscleFiber2017` This is a thin evidentiary base for a class of material in which aging is expected. Moreover, though often stated as advantages in the literature, economic and environmental claims still precede the evidence.{cite:t}`edlundEconomicFeasibilityEnvironmental2018,breslauerCurrentProgressScaleUp2025`\n\nThe case for protein-based design therefore should not rest on beating a ceramic on a coupling coefficient, nor on unexamined appeals to sustainability. Strong arguments in favor of the program remain. For one thing, *the design space is large but searchable*. A device is specified largely by its sequence, and sequences are enumerable and increasingly screenable before manufacture,{cite:t}`frederixExploringSequenceSpace2015,miserezProteinBasedBiologicalMaterials2023` so design can proceed by search rather than by specification. Further, *a small set of levers serves many properties*. A process line able to control draw{cite:t}`negishi2012production-35d`, applied field{cite:t}`farrarPermanentPolarityPiezoelectricity2011`, bath chemistry{cite:t}`risingBiologicalMaterialsProcessing2023` and cross-link density{cite:t}`nairSelfassemblyCollagenBundles2019,grindyEngineeringElasticityRelaxation2016` can produce a family of distinct devices without being rebuilt for each. This suggests an ambitious manufacturing vision, in which a modest number of control parameters on a common spinning platform yields a broad catalogue of functional fibers, with sequence design and screening carried out upstream at high throughput.\n\n(ch:trans)=\n## Transduction\n\n:::{figure} https://thestacks-01.s3.amazonaws.com/publications/01M75CABVGH3G9RJZ60XNHCRJF/media_38c0668694dccb8e7f8db1731c50c8f346db499704d3d56ba8b26b84bbed02fc.svg\n:name: fig:transMech\n:align: center\n\nA map of some known transduction mechanisms in protein systems, each of which might be exploited in sensing, signaling, actuation, or computation in a designed device. Not all are equally supported in the literature, nor equally relevant across spatial and temporal scales.\n:::\n\nTo be useful, a computational system must interface with the world. Signals from the world come in many physical forms, like mechanical stress, temperature, electrical fields, and light. **Transduction** is, in essence, the conveyance of a signal from one domain to another via a physical coupling that maps a quantity in one domain onto a conjugate quantity in another, say, from applied stress to polarization. Protein fibers exhibit a remarkable breadth of such couplings (Fig. [%s](#fig:transMech)).\n\n+++\n### For / As Computation\n\nThe organizing distinction in this chapter is whether a given instance of transduction plays an instrumental or a constitutive role in computation. The *instrumental* role is transduction **for** computation. In the language of the I/O map [(%s)](#eq:IOmap), the fiber realizes the input ({math}`\\u \\mapsto \\x`) and/or output ({math}`\\x \\mapsto \\y`) stages, while any nontrivial transformation of information happens in a separate element. A piezoelectric collagen fiber whose voltage output is read only as a faithful copy of the applied strain (we might demand linearity and memorylessness for this application) is operating instrumentally. The *constitutive* role, on the other hand, is transduction **as** computation. The transduction event is itself the transformation of interest, so that the information-bearing content of the output is more than a domain-shifted copy of the input. Some degree of distortion is inevitable in physical transduction, so the boundary between these roles is somewhat fuzzy. In the language of §[%s](#sec:physComp), the distinction rests on the abstract map {math}`C:\\mathcal{M}\\to\\mathcal{M}` the device is to be trusted to emulate. If {math}`C` is the identity map (i.e., the goal is perfect transmission) then every departure of the output from a copy of the input contributes to the error. When {math}`C` is nontrivial, the same departure might be information-bearing. A viscoelastic fiber network asked to faithfully transmit strain signals is hysteretic and delayed in its response, poor qualities in a basic transducer! Tuned and read appropriately, those same qualities could perform a passive, frequency-selective computation on the input signal.\n\n(ssec:viscopiezo)=\n#### Minimal model: A nonlinear visco-piezoelectric fiber\n\nTo illustrate the constitutive role, I will introduce a one-dimensional weakly nonlinear model of a single fibril exhibiting both viscoelasticity and piezoelectricity. The full construction, from a free energy with internal variables through non-dimensionalization to the open-circuit reduction, is given in Appendix [A](#app:viscopiezo). The internal unobserved state is described by {math}`N` internal modes {math}`\\x = (\\xi_1,\\dots,\\xi_N)` representing slow rearrangements of the material (ionic redistributions, etc.) that lag behind the applied strain and field. Each relaxes toward equilibrium as a first-order process with its own time constant, resulting in a discrete relaxation spectrum (often the starting point for viscoelastic modeling{cite:t}`malkinUseContinuousRelaxation2006`). The model possesses an elastic anharmonicity (stiffness growing with instantaneous strain) and a relaxational anharmonicity (strain-stiffening mediated by internal-mode relaxation on finite timescales). The two are distinguished by their rate dependence, and both have observational precedent: collagen networks stiffen with strain amplitude under quasistatic loading,{cite:t}`motteStrainStiffeningCollagen2013` while in ligament tissue the fibril modulus rises with strain rate.{cite:t}`karunaratneNanoscaleMechanismsExplain2018` That the relaxation involves more than one internal timescale is directly supported by Kovacs-like memory effects observed in collagen in the nonlinear regime.{cite:t}`ghadaiKovacslikeMemoryEffect2025`\n\nThe fibril is driven by an axial stress {math}`u(t)` and read in open-circuit as a voltage {math}`y(t)`. In dimensionless form, the model reduces to\n\n```{math}\n:label: eq:model\n\n\\begin{align}\n        \\mathbb{T}\\, \\dot{\\x} &= \\mathbf{p}\\,h(u,\\x) - \\mathbf{q}\\, h(u,\\x)^2\n            - \\x - \\mathbf{r}\\, (\\bm{\\eta}\\cdot \\x) \\ , \\\\\n        y &= -\\big(h(u,\\x) + G \\,h(u,\\x)^2 + \\bm{\\eta}\\cdot \\x \\big) \\ ,\n    \\end{align}\n```\n\nfor strain {math}`h(u, \\x)` fixed by mechanical balance \\[Eq. [(%s)](#eq:strainRoot)]. The model is specified by {math}`3 + 4N` dimensionless numbers, each with a physical reading. Table [%s](#tab:controlCoefs) of App. [A](#app:viscopiezo) defines each and gives its physical reading.\n\n:::{figure} https://thestacks-01.s3.amazonaws.com/publications/01M75CABVGH3G9RJZ60XNHCRJF/media_ba290eaba8f61d528b941542a9f3cd8d6b5ca4ed8c4e17dcf773fbe3a3be5937.svg\n:name: fig:viscopiezoISV\n:align: center\n\nBehaviors of the visco-piezoelectric model with {math}`N=2` internal modes, comparing the nonlinear model (red) against its linearization (green; identical memory and couplings, nonlinear terms zeroed). Parameters: {math}`k_0^2 = 0.2`, {math}`g = 0.2`, {math}`g_e = 0.3`, {math}`\\Delta^c = (0.30, 0.20)`, {math}`\\Delta^e = (0.25, -0.10)`, {math}`\\tilde{\\tau} = (1, 0.125)`, {math}`\\ell = (0.30, 0.10)`. **(a)** Linear and nonlinear spectra for a two-tone input. **(b)** DC output offset versus single-tone amplitude. **(c)** Low-passed output for an amplitude-modulated carrier.\n:::\n\nFigure [%s](#fig:viscopiezoISV) demonstrates several behaviors exhibited by the model:\n\n*   **Frequency mixing (heterodyning).** Acting on a two-tone input, the quadratic terms produce output components at sum, difference, and harmonic frequencies \\[Fig. [%s](#fig:viscopiezoISV)(a)]. These are operations underlying modulation, down-conversion, and coincidence detection, though the practical usability depends on conversion efficiency and noise, neither of which is assessed here. For reservoir computing (Ch. [%s](#ch:RC)), the strength and order of mixing correlate with performance across a range of computational tasks.{cite:t}`kiyabuOptomechanicalReservoirComputing2025`\n\n*   **Square-law rectification.** For a single zero-mean oscillation, the DC component reports the input power {math}`\\propto\\angbr{u^2}` \\[Fig. [%s](#fig:viscopiezoISV)(b)]—a passive, phase-blind intensity meter registering how much vibration is present in a band. For a fast carrier with a slowly changing amplitude, the low-frequency component tracks the squared envelope \\[Fig. [%s](#fig:viscopiezoISV)(c)]. This is the operation behind the band-power readout {math}`\\mathcal{R}` of the texture case study \\[§[%s](#ssec:readout), Eq. [(%s)](#eq:readoutR)].\n\nNone of these is available to the linearized fiber, whose response can only relay the frequencies it is given.\n\nThe reader should be skeptical: this model has not been validated against real data,[^s6HW9ihBfj] and, more damningly, I have neglected thermal noise against my own advice (§[%s](#sec:noise)). Functional behaviors derived for a noiseless model may completely degrade once noise is introduced. Still, the model demonstrates the general lesson that a property that disqualifies a material as a clean transducer (nonlinearity is in general regarded as an impediment to sensing{cite:t}`fradenHandbookModernSensors2010`) may be the resource that lets it compute. The constitutive view suggests a program of discovery: one examines the intrinsic features of a given material and asks how they might be harnessed. The reservoir-computing paradigm of Ch. [%s](#ch:RC) is an instance of this program *ad extremum*.\n\n+++\n(sec:survey)=\n### A survey of transduction mechanisms\n\nProtein-based materials couple the mechanical, thermal, electrical and optical domains in a variety of ways (Fig. [%s](#fig:transMech)). Table [%s](#tab:mechSummary) summarizes these, and App. [B](#app:survey) treats each in more detail, discussing coefficients, microscopic origins, characterization, and enhancement strategies. Here I highlight some notable features and ideas, and §[%s](#ssec:FoM) takes up the corresponding figures of merit at the device level.\n\n:::{list-table} Transduction mechanisms native to protein-based materials with appendix sections. {math}`^\\dagger`Hypothetical: motivated by theory but (to my knowledge) not yet demonstrated in a protein fiber.\n:header-rows: 1\n:name: tab:mechSummary\n:align: center\n\n*   - Mechanism\n    - Coupling\n    - Representative realization\n*   - Piezoelectricity (§[%s](#app:piezo))\n    - stress {math}`\\leftrightarrow` polarization\n    - collagen fibrils, peptide nanotubes, electrospun mats\n*   - Pyroelectricity (§[%s](#app:pyro))\n    - {math}`\\Delta T \\to` polarization\n    - aortic elastin; poled electrospun PVDF fibers\n*   - Flexoelectricity (§[%s](#app:flexo))\n    - strain gradient {math}`\\to` polarization\n    - bone mineral, cell membranes; *individual fibrils*{math}`^{\\dagger}`\n*   - Ferroelectricity (§[%s](#ssec:ferro))\n    - switchable polarization\n    - aortic elastin; {math}`\\gamma`-glycine crystals\n*   - Triboelectricity (§[%s](#ssec:tribo))\n    - contact {math}`\\to` charge transfer\n    - electrospun mats, silk-nanoribbon films\n*   - Ionic and protonic conduction (§[%s](#app:ionic))\n    - field {math}`\\to` ion current\n    - designed peptide and amyloid fibers\n*   - Electronic conduction (§[%s](#app:electronic))\n    - field {math}`\\to` electron current\n    - microbial nanowires, conductively coated fibers\n*   - Piezoresistance (§[%s](#app:piezoresist))\n    - strain {math}`\\to` conductance\n    - composites carrying a conductive phase\n*   - Capacitive transduction (§[%s](#ssec:capacitive))\n    - deformation {math}`\\to` capacitance\n    - ionotronic fibers, hair-like MEMS pillars\n*   - Mechanoluminescence (§[%s](#app:mechLum))\n    - stress {math}`\\to` light\n    - {math}`\\ce{ZnS}:\\ce{Mn^{2+}}` in electrospun PVDF\n*   - Electroluminescence (§[%s](#app:elLum))\n    - field {math}`\\to` light\n    - hydrogel-clad coaxial fibers\n*   - Photomechanical actuation (§[%s](#app:photomech))\n    - light {math}`\\to` strain, modulus\n    - azobenzene in spun protein fibers and cellulose fabrics\n*   - Photoconductivity (§[%s](#app:photocond))\n    - light {math}`\\to` current\n    - {math}`\\ce{TiO2}` and perovskite composite fibers\n*   - Others (§[%s](#app:othersMech))\n    - thermoelectric, thermo-mechanical, hygroelectric, chemo-mechanical, chemo-electrical\n:::\n\nFor each coupling in Table [%s](#tab:mechSummary), the strength of the material’s response (often characterized by the **sensitivity** {math}`\\partial \\y/\\partial \\u`{cite:t}`fradenHandbookModernSensors2010`) reflects a material’s chemistry and processing, and many design levers recur across mechanisms. Adding a single hydroxyl group to collagen’s building blocks raises the piezoelectric constants by up to two orders of magnitude,{cite:t}`guerinDeconstructingCollagenPiezoelectricity2018,beraMolecularEngineeringPiezoelectricity2021` and carboxylate density governs proton transport in metalloprotein wires.{cite:t}`leeProtonicConductivityMetalloprotein2023` Supramolecular order controls the response in amino acid crystals{cite:t}`guerinControlPiezoelectricityAmino2018` and raises ionic conductivity along aligned fibers.{cite:t}`navarroHarnessingPrioninspiredAmyloid` Piezoelectric polarization is axial, so parallel fibrils add and antiparallel ones cancel;[^MiGW0L5Cpw] crosslinking-driven self-assembly offers one route to local fibril alignment with a correspondingly enhanced response.{cite:t}`nairSelfassemblyCollagenBundles2019` The impact of water is significant and varied across mechanisms. It lowers the piezoelectric constant of several proteins{cite:t}`fukadaPiezoelectricPropertiesOrganic1974` and can drive an irreversible change of crystal phase in glycine,{cite:t}`isakovSituObservationHumidity2014` while ionic conduction can increase by orders of magnitude from dry to saturated regimes.{cite:t}`amdurskyMacroscaleBiomolecularElectronics2019` Response is generally tensorial, and geometry determines which components of the coupling tensor are dominant. In chiral polymers the shear piezoelectric coefficients are typically larger than the axial coefficient {math}`d_{33}`,{cite:t}`fukadaPiezoelectricPropertiesOrganic1974,raviMolecularOriginPiezo2012,vasilevPiezoelectricPropertiesDiphenylalanine2016` so a fiber loaded in pure tension is driven through its weakest coefficient.\n\nAs a cautionary note, reported coupling coefficients in the literature differ in tensor component, mechanical boundary condition, drive frequency, and length scale, and few reports are sufficiently explicit about all four.{cite:t}`layIntrinsicPiezoelectricProperties2021,sherritCharacterizationPiezoelectricMaterials2007,furukawaComprehensiveUnderstandingPiezoelectricity2023` Coefficients quoted across the literature (and in the appendix) are therefore not directly comparable without great care, and part of the spread attributed to chemistry may be measurement convention.\n\n+++\n(sec:iometrics)=\n### I/O and Metrics\n\nThe pair {math}`(\\mathbf{u},\\mathbf{y})` fixes the I/O character of a device, but whether a given transduction is usable (and whether stages can be chained) is decided by a handful of figures of merit and interface constraints.\n\n(ssec:bandimp)=\n#### Bandwidth and impedance matching\n\n*Impedance* encodes the resistance of a material to external drive, formally described by the frequency-domain pair of conjugate variables whose product is a power, like force and velocity, stress and strain rate, voltage and current, pressure and particle velocity.{cite:t}`fradenHandbookModernSensors2010` *Bandwidth* is the window of frequencies over which the device operates as desired, commonly running roughly from the inverse of the slowest internal relaxation time to the inverse of the fastest.\n\n*Impedance matching* is the problem of getting a signal across a boundary rather than reflecting it. Boundaries are present at the input, output, and any internal stage in a device. For a junction between media of impedance {math}`\\hat{Z}_1` and {math}`\\hat{Z}_2`, power transfer is maximized when the device impedance matches that of the source, since reflection at the junction grows with the ratio {math}`\\hat{Z}_2/\\hat{Z}_1` in either direction. A device far stiffer than its source barely moves, while one far softer absorbs little of the energy available to it. This is a standard argument for polymer over ceramic transducers in water and tissue.{cite:t}`fradenHandbookModernSensors2010` In one striking example, a strand of spider silk is so well matched to air that it moves with the surrounding medium at near maximum physical efficiency from 1 Hz to 50 kHz.{cite:t}`zhouSensingFluctuatingAirflow2017` The readout boundary must also be matched. A detector is a load, and a load draws power from the system it is attached to, so a mismatched readout perturbs the state it is meant to observe.\n\nThe story is often more complicated, of course. Strain-stiffening,{cite:t}`motteStrainStiffeningCollagen2013` crosslink remodeling,{cite:t}`grindyEngineeringElasticityRelaxation2016,tunnBioinspiredHistidineZn22019` and temperature and hydration variation{cite:t}`fukadaPiezoelectricPropertiesOrganic1974,isakovSituObservationHumidity2014` violate the assumptions of linearity and time-invariance in the standard treatment of impedance. Impedance matching becomes more complicated in this case, with nonlinearities hidden in coefficients which become functions of drive amplitude and operating point.{cite:t}`sherritCharacterizationPiezoelectricMaterials2007,damjanovicFerroelectricDielectricPiezoelectric1998` Further, impedance is a lumped-element concept, but in many cases (explicitly arising in the modeling demands discussed in Ch. [%s](#ch:RC)) devices must be regarded as spatially distributed systems.\n\n(ssec:fom)=\n#### Figures of merit\n\nThe performance of a device depends not only on its raw coupling coefficients, but also on the geometry, the load, and the readout, and useful figures of merit address these more directly. This subsection collects some principal figures.\n\n##### Sensing\n\nFor a passive sensor read in open circuit, what matters is the voltage delivered per unit input, so that the magnitude of the raw coefficients can be misleading. In the piezoelectric case (§[%s](#app:piezo)), the relevant figure of merit is the voltage coefficient[^ka2VKnlrDR]\n\n```{math}\n:label: eq:voltCoef\n\ng_{ijk} = (\\varepsilon^{-1})_{im}d_{mjk}\n```\n\nA material with modest piezoelectric coefficients {math}`d_{mjk}` but low permittivity[^VjBQP5iBNL] {math}`\\varepsilon_{im}` can therefore outperform a nominally stronger one in open-circuit voltage per unit stress. The same applies to pyroelectric sensing (§[%s](#app:pyro)). For a device of thickness {math}`\\ell` in its linear regime, a temperature change {math}`\\Delta T` induces\n\n```{math}\n:label: eq:pryoVolt\n\n\\Delta V_{\\text{pyro}} = \\ell \\,\\Delta E \\simeq \\frac{p}{\\varepsilon}\\ell \\Delta T \\ ,\n```\n\nwith {math}`\\varepsilon` the absolute permittivity and {math}`p` the pyroelectric coefficient (both approximated here as scalars along the relevant axis). The amplification of the effect by low permittivity was shown in Ref.{cite:t}`yang_flexible_2013`, where a PVDF cell with {math}`p = -44\\ \\mu\\text{C}\\,\\text{m}^{-2}\\text{K}^{-1}` (far below the strongest ceramics{cite:t}`fradenHandbookModernSensors2010`) produced {math}`\\Delta V_{\\text{pyro}} \\approx 2.5\\,\\text{V}` as its temperature rose from 295 to {math}`314\\,\\text{K}`.\n\nAll pyroelectrics are also piezoelectrics,{cite:t}`fradenHandbookModernSensors2010` and part of the pyroelectric response \\[the secondary contribution {math}`d_{ijk}c_{jk\\ell m}\\alpha_{\\ell m}` of Eq. [(%s)](#eq:pyroSecondary)] is just the piezoelectric response to thermally induced strain. Molecular dynamics simulations suggest that collagen’s pyroelectric response may be predominantly of this secondary type.{cite:t}`raviMolecularOriginPiezo2012` A pyroelectric element is therefore also a strain sensor, and often an unwelcome one, mechanical disturbance being a primary noise source in pyroelectric detector design. A conventional remedy is to place two identical elements side by side, wired so that their outputs subtract.{cite:t}`fradenHandbookModernSensors2010` This rejects the mechanical channel, but it is interesting to ponder whether the thermal and mechanical channels might be separable in time instead. In the PVDF cell of Ref. {cite:t}`yang_flexible_2013`, the thermal signal relaxed over finite timescales while the mechanical one was effectively instantaneous. If a fiber’s thermal and mechanical relaxations are sufficiently distinct, a single element might report both, distinguishing a warm touch from a cold one.\n\nOther mechanisms have no internal polarization to read, and must instead modulate an externally supplied signal. For a piezoresistive element (§[%s](#app:piezoresist)), where strain alters conductance, the relevant figure of merit is the *gauge factor*\n\n```{math}\n:label: eq:gaugeFactor\n\n\\mathrm{GF} = \\frac{\\Delta R / R_0}{x} \\ ,\n```\n\nthe relative resistance change {math}`\\Delta R / R_0` per unit strain {math}`x`.{cite:t}`homayounfarWearableSensorsMonitoring2020` Any such figure holds only within an operating window. Triboelectric output, for example, saturates above a certain pressure, capping the usable range.{cite:t}`homayounfarWearableSensorsMonitoring2020`\n\n##### Actuation and energy harvesting\n\nWhere the device is asked to do work, the raw coefficients are misleading in a different way. The units {math}`\\pmv` of the piezoelectric coefficient understate achievable actuation, since displacement scales as {math}`\\Delta L \\sim d\\, E\\, L` for device length {math}`L`. Bending actuators amplify the effect further, deflecting a cantilever tip in proportion to curvature {math}`\\times` length{math}`^2`.{cite:t}`zhangDesignManufacturingPiezoelectric2025` For energy conversion the standard figure is the electromechanical coupling factor {math}`k^2`, the fraction of elastically stored energy available for conversion to electrical form.{cite:t}`sherritCharacterizationPiezoelectricMaterials2007` It appears as the parameter {math}`k_0^2 = e_0^2 / c_0\\varepsilon_0` of the minimal model in §[%s](#ssec:viscopiezo), evaluated at fixed internal state.\n\n##### Comparison across mechanisms\n\nThe crudest but most universal figure is the signal-to-noise ratio introduced in §[%s](#sec:noise), judged against the tolerance {math}`\\epsilon` of the task the device serves. Beyond it, comparisons across mechanisms require great care. A useful reference is a review by Homayounfar & Andrew,{cite:t}`homayounfarWearableSensorsMonitoring2020` which places the piezoresistive, piezoelectric, capacitive, triboelectric, and transistive families side by side.\n\n##### Temporal figures\n\nWhere the target application involves processing time-varying signals, relaxation timescales become relevant material parameters. Consider the dielectric couplings of §[%s](#sec:dielectric), for instance. In their linear regime, they are effectively instantaneous and carry no fading memory of their own,{cite:t}`furukawaComprehensiveUnderstandingPiezoelectricity2023` and in a poled element (one whose domains have been aligned by a strong field during fabrication, like PVDF), maintained stress yields a decaying rather than a sustained output.{cite:t}`fradenHandbookModernSensors2010` To contribute to temporal computation in a simple passive device, the linear couplings must be paired with a memory-bearing partner. Viscoelastic relaxation supplies the memory of the model in §[%s](#ssec:viscopiezo). In an ionic capacitor (§[%s](#ssec:capacitive)), the double layer and the slow relaxation of the mobile ions that form it lend an otherwise nearly linear geometric element both nonlinearity and memory.{cite:t}`kohReservoirComputingDielectric2022,wangIonicPotentialRelaxation2024` In a triboelectric device (§[%s](#ssec:tribo)), the response to a contact event depends on charge left by prior events. This is another presentation of the lessons of §[%s](#ssec:viscopiezo): this history dependence both spoils the clean, memoryless sensor and presents a candidate source of the fading memory required by reservoir computing (Ch. [%s](#ch:RC)), provided the charge-relaxation timescale can be characterized and controlled. Additional metrics specific to reservoir computing are developed in Ch. [%s](#ch:RC).\n\n+++\n(sec:composition)=\n### Composition of mechanisms\n\nIn principle, single mechanisms could be composed into richer maps, the output of one stage driving the next. To determine whether an imaginable composition is implementable in reality, one must take a number of things into account. For instance, adjacent stages must be impedance matched, or signal is lost to reflection and heat (§[%s](#ssec:bandImp)). Even where stages are compatible, the thermodynamic cost per bit accumulates stage by stage (§[%s](#sec:thermo)), and by the data-processing inequality, concatenating channels can only degrade the information carried through them.{cite:t}`coverElementsInformationTheory2006,mattinglyColiChemosensingAccuracy2026` This sets a real limit on depth, though the per-stage degradation may vary widely across mechanisms and devices, and the utility of such a device depends on whether it can perform its role without the information it discards.\n\nTo illustrate the kind of proposal envisioned here, consider a fiber that changes conformation when some ligand binds to it, as in supramolecular fibrillization.{cite:t}`tunnBioinspiredHistidineZn22019` Suppose that a polarization develops from a strain gradient (§[%s](#sec:dielectric)) resulting from the conformational change. This polarization approximately tracks the ligand concentration, {math}`P(t) \\propto K_d^{-1}c(t)`,[^iPproduXJu] with the dissociation constant {math}`K_d` setting the gain. The electrode charge is {math}`Q \\propto P \\propto c`, so the current {math}`I = \\dot{Q}` tracks the temporal derivative {math}`\\dot{c}(t)`. This is recovered only within a band: if {math}`c` varies faster than the electrode charge can leak away, the fiber holds its charge and reports {math}`c` rather than {math}`\\dot{c}` (§[%s](#ssec:bandImp)). If {math}`c` varies faster still than the binding and unbinding kinetics, the fiber reports its own relaxation rather than the stimulus, a failure of the intended function, but not necessarily a useless behavior (§[%s](#ssec:fadingMemory)). *Selectivity* is a separate problem in such a sensor.{cite:t}`luBiomoleculeSensorsBased2025`\n\nThis idea warrants closer scrutiny than I have been able to give it. Generic models of this kind, with an explicit accounting of noise and of the material parameters that set the operating bands, may be a low-barrier avenue for experimentally testable theory, perhaps following the information rate analysis of Mattingly et al.{cite:t}`mattinglyColiChemosensingAccuracy2026`\n\n+++\n(ssec:pacstudy)=\n### Case study: Sensing textures\n\nThis chapter closes with a case study of a bio-inspired texture-sensing platform. The goal is to extract information about a surface’s fine textural detail by dragging a small, soft contact across it. This is how humans perceive such details: when we sweep a fingertip across a surface, features below {math}`\\sim200\\,\\mu`m are resolved not as a spatial pattern of pressure but as the vibration generated by the sliding contact.{cite:t}`klatzkyMultisensoryTexturePerception2010,bensmaiaVibrationsTexture2003` The analysis builds on a classical model of a biological mechanoreceptor as a mechanical pre-processor. Challenges unmet by the simple transduction picture will motivate the reservoir-sensing perspective of Ch. [%s](#ch:RC).\n\n(ssec:deftexture)=\n#### Texture and the scanning drive\n\nA device *senses* some property of the environment if, through the stimulus {math}`\\u`, that property can be inferred (or decoded) from the readout {math}`\\y`. The first task is to determine which abstract qualities of a surface encompass its “texture”.[^b1uIhVFEj5] Here, I identify texture with the *roughness* of a surface, defined as follows.\n\nLet {math}`h(r)` be a zero-mean height field along a one-dimensional scan track of a surface. Assuming statistical stationarity of the profile, the second-order structure of the surface is captured by the power spectral density{cite:t}`rodriguezHowDetermineSurface2024`\n\n```{math}\n:label: eq:C1D\n\nC_{1\\rm{D}}(q) = \\frac{1}{2\\pi}\\int_{-\\infty}^{\\infty}R_h(r)\\,\\e{-i qr} \\,\\md r \\ , \\qquad R_h(r) \\equiv \\lim_{L\\to \\infty}\\frac{1}{L}\\int_{-L/2}^{L/2}\\md r' \\,h(r')h(r'+r) \\, .\n```\n\nFor example, a regular corrugation of amplitude {math}`h_0` and peak-to-peak distance {math}`\\lambda` has height field {math}`h(r) = h_0\\cos(2\\pi r / \\lambda)`, autocovariance {math}`R_h(r) = \\tfrac{1}{2}h_0^2\\cos(q_0 r)` and hence PSD {math}`C_{1\\rm D}(q) = \\frac{h_0^2}{4}\\sbrac{\\delta(q - q_0) + \\delta(q + q_0)}`, a single spectral line at the corrugation wavenumber {math}`q_0 \\equiv \\frac{2\\pi}{\\lambda}`. Real surfaces have a continuous spectrum.[^oOKDpowLIj]\n\nThe sensor moves a small contact along the scan track at velocity {math}`v`, converting the spatial profile into a time series in which each wavenumber {math}`q` appears at angular frequency\n\n```{math}\n:label: eq:freqFreq\n\n\\omega = q v \\   \\xrightarrow[]{ \\ \\text{  monochromatic } \\ }  \\  q_0 v = \\tfrac{2\\pi v}{\\lambda}  \\ ,\n```\n\nso the same feature of wavelength {math}`\\lambda` can arrive at the transducer at a frequency set jointly by the surface and the sensor’s motion.\n\nTake scanning speeds of order {math}`v \\sim 1\\text{--}25` cm/s and fine features of wavelength {math}`\\lambda \\sim 10\\text{--}10^3 \\, \\mu\\text{m}`. Then the information-bearing content of the drive arrives at frequencies {math}`f = v/\\lambda \\sim 10\\text{--}10^4` Hz, with typical presentations concentrated in roughly 50–{math}`{10}^3` Hz.[^X3bYiToKSF] The force carried by these fine textural details will be much weaker than the static or slow forces from the contact.{cite:t}`wiertlewskiMechanicalBehaviorFingertip2012`\n\n(ssec:pcmodel)=\n#### LS model: A mechanical high-pass filter\n\nThe Pacinian corpuscle is a sub-dermal biological mechanoreceptor approximately 2 mm in length, consisting of {math}`\\sim`50 concentric layers (**lamellae**) wrapped around an afferent terminal. It is responsible for discriminating fine texture, responsive in the {math}`\\sim`40–1000 Hz band, with a peak sensitivity in 250–550 Hz{cite:t}`talbotSenseFluttervibrationComparison1968,bellStructureFunctionPacinian1994` \\[Fig. [%s](#fig:pcorp)(a)]. In the Loewenstein–Skalak (LS) model \\[Fig. [%s](#fig:pcorp)(b)], the capsule acts as a passive mechanical high-pass filter, pre-processing vibrations from exploratory touch so that only vibrations carrying fine textural information reach the afferent, the sensory nerve fiber whose terminal sits at the core of the capsule and carries the resulting spike train to the central nervous system.[^oHdRNiUYu3]\n\n:::{figure} https://thestacks-01.s3.amazonaws.com/publications/01M75CABVGH3G9RJZ60XNHCRJF/media_8e86b1b0509ea7ab9fd66c2b8ea15cff198d7bfe272d457a4e5d8e05039b2480.svg\n:name: fig:pcorp\n:align: center\n\n**(a)** Concentric lamellae and fluid layers surround the core, which contains a demyelinated neuron. The gray box marks the slice examined in the LS model. **(b)** Spring–dashpot representation of the LS model. These figures are based roughly on Figs. 1 and 4 of Ref.{cite:t}`loewensteinMechanicalTransmissionPacinian1966`.\n:::\n\nThe model treats the {math}`i`th lamella as an elastic membrane of stiffness {math}`k_{M,i}`, coupled to its neighbours by Kelvin–Voigt elements with stiffness {math}`k_{S,i}` and damping {math}`\\eta_{i}` \\[Fig. [%s](#fig:pcorp)(b)]. The resulting system in frequency space is solved in App. [%s](#app:LSmodel) for the transfer function\n\n```{math}\n:label: eq:LStransfer\n\nH(\\omega) \\equiv \\frac{\\hat{F}_{\\rm core}(\\omega)}{\\hat{F}_{\\rm ext}(\\omega)} = \\hat{Z}_1(\\omega)\\sbrac{\\mathbb{A}(\\omega)}^{-1}_{1,N} \\ ,\n```\n\nwhere {math}`\\mathbb{A}(\\omega)` is the tridiagonal matrix of inter-layer couplings \\[Eq. [(%s)](#eq:matrixSolution)]. The right-most expression is read intuitively as the impedance {math}`\\hat{Z}_1(\\omega)` of the final fluid layer times the complex admittance {math}`\\sbrac{\\mathbb{A}(\\omega)}^{-1}_{1,N}` carrying mechanical signals from layer {math}`N` to layer 1.\n\nThe capsule behaves as a high-pass filter (the mechanism and its scaling with lamella number and stiffness ratio is analyzed in App. [%s](#app:LSmodel)). At low frequencies, the viscous fluid stays in equilibrium with the applied force, so each fluid layer acts as a spring, passing only the fraction {math}`\\sim k_S/k_M` of its outer neighbour’s displacement inward. Static transmission is therefore suppressed geometrically with the number of lamellae as {math}`H(0) \\sim (k_S/k_M)^N` [(%s)](#eq:staticSuppression). At high frequencies, the dashpots rigidify so the stack translates as a rigid body, transmitting the signal perfectly \\[{math}`H(\\omega)\\to 1` as {math}`\\omega\\to\\infty`]. Between these two limits, the capsule differentiates the signal \\[{math}`\\abs{H(\\omega)}\\sim\\omega`], reporting the rate of loading [(%s)](#eq:HsingleLayer).\n\nFor texture sensing, this kind of mechanical pre-filtering would help keep irrelevant information from swamping the readout. Given the right elasticity and viscosity of the membranes and fluid layers, signals from static contact forces are suppressed while vibrations from fine texture arrive in the differentiating band and are passed to the transducer at the core. The bands are set by the ratio {math}`k_S / k_M` and the number of layers {math}`N`, both morphological parameters tunable in designed materials.\n\n(ssec:skinembed)=\n#### Embedding in a synthetic skin\n\nConsider now a corpuscle-like element embedded below the surface of a synthetic skin. It may be one of many such receptors harvesting information from the same contact patch. Describe this contact by a weighting kernel {math}`w(r)` translating at speed {math}`v`. For simplicity, I assume this to be fixed, symmetric, and of unit gain, so the resulting kinematic drive and its temporal power-density spectrum are\n\n```{math}\n:label: eq:driveConv\n\nu(t) = (w * h)(vt) \\ \\ \\implies  \\ \\ \n    P_u(\\omega) = \\frac{1}{v}\\,\\abs{\\hat{w}\\paren{\\omega/v}}^2\n    C_{\\rm 1D}\\paren{\\omega/v} \\ .\n```\n\nThe finite patch acts as a spatial low-pass that erases wavelengths much shorter than its width, and the scan converts wavenumber to frequency via Eq. [(%s)](#eq:freqFreq).\n\nBetween this drive and the capsule sit two further mechanical elements: the local skin patch and the bulk tissue, treated here respectively as a mass–spring–damper {math}`(m_c, k_c, \\eta_c)` and a simple Kelvin–Voigt element {math}`\\hat{Z}_t(\\omega) = k_t + i\\omega\\eta_t` coupling the patch to the outermost lamella. Since each element is linear and time-invariant[^YH7LOg7ZEu], the skin patch model can be simply appended to the ladder of Fig. [%s](#fig:pcorp)(b) as an {math}`(N{+}1)`th rung. Solving the extended ladder (App. [%s](#app:skinLadder)) factorizes the total response exactly into skin, coupling, and capsule stages \\[Eq. [(%s)](#eq:HtotFactored)], delivering the spectrum {math}`P_{\\rm core}(\\omega) = |H_{\\rm tot}(\\omega)|^2\\,P_u(\\omega)` to the transducer at the core. The full chain can be matched to the texture band to ensure that the right signal is passed to the core \\[Fig. [%s](#fig:transferFunct)]. A receptor that is compliant relative to the patch reads the skin’s motion without perturbing it \\[App. [%s](#app:skinLadder)], so that many receptors with distinct transfer functions {math}`H^{(m)}_{\\rm tot}` could be embedded in the skin.\n\n(ssec:readout)=\n#### Readout\n\nThe readout is the stage that converts the mechanical state at the core into whatever kind of signal the downstream elements require. This could be a vector of observables read at several sites, or a signal evolving in time. The afferent’s output in a Pacinian corpuscle is the latter, sending a spike train to the central nervous system, the textural information encoded in its temporal structure.{cite:t}`weberSpatialTemporalCodes2013,longTextureEncodedPrecise2022` Let us consider the much simpler case of a scalar readout, i.e., a single transducer at the core reporting one number. A natural passive choice, consistent with some empirical observations of the Pacinian corpuscle,{cite:t}`bensmaiaVibrationsTexture2003` is the power registered in the responsive band, read through the transducer’s sensitivity band {math}`W(\\omega)`:\n\n```{math}\n:label: eq:readoutR\n\n\\mathcal{R} \\equiv \\int \\frac{\\md\\omega}{2\\pi}\\,\n    W(\\omega)\\,\\abs{H_{\\rm tot}(\\omega)}^2 P_u(\\omega) \\ .\n```\n\nWhat information does {math}`\\mathcal{R}` carry about the surface? Substituting Eq. [(%s)](#eq:driveConv) and making a change of variables {math}`\\omega = qv`,\n\n```{math}\n:label: eq:readoutQ\n\n\\mathcal{R} = \\int \\frac{\\md q}{2\\pi}\\,\n    W_{\\rm eff}(qv)\\,\\abs{\\hat{w}(q)}^2 C_{\\rm 1D}(q) \\ , \\qquad\n    W_{\\rm eff}(\\omega) \\equiv W(\\omega)\\abs{H_{\\rm tot}(\\omega)}^2 \\ .\n```\n\nThe readout is therefore a weighted moment of the surface spectrum, through a window {math}`W_{\\rm eff}` rescaled by the scanning speed {math}`v`. If {math}`W_{\\rm eff}(\\omega) \\sim \\omega^{2n}` over the supported band, for instance, then {math}`\\mathcal{R} \\sim v^{2n} \\ \\times` the {math}`(2n)`th spectral moment of the surface. Then a manifestly speed-invariant scaling is {math}`n=0`, for which {math}`\\mathcal{R} = \\angbr{u^2}` is the displacement variance. For natural surfaces ({math}`C_{\\rm 1D} \\sim q^{-1-2H}`, §[%s](#ssec:defTexture)) this is dominated by coarse features, so such a readout might be nearly blind to fine texture. For {math}`n = 1`, {math}`\\mathcal{R} = \\langle \\dot{u}^2\\rangle \\propto v^2` is the velocity variance. This suppresses the coarse features but is strongly speed-dependent, and in general, increasing {math}`n` increases the sensitivity to fine structure while simultaneously increasing the speed-dependence of the output. Where the total weight {math}`W_{\\rm eff}` is not approximated by a power law, as in some regimes of the bandpass {math}`\\abs{H_{\\rm tot}}^2` developed in this section and App. [C](#app:caseStudy), changing the scanning speed reshapes the sampled band rather than just rescaling {math}`\\mathcal{R}`. See Fig. [%s](#fig:readoutAmbiguity).\n\n:::{figure} https://thestacks-01.s3.amazonaws.com/publications/01M75CABVGH3G9RJZ60XNHCRJF/media_06149145af3b69905a71e9ee40bab9746edb5d7f644d71495f4c95c1c898e240.svg\n:name: fig:readoutAmbiguity\n:align: center\n\n**Left:** 5 mm sections of two synthetic surfaces with RMS height 4 {math}`\\mu`m and spectra {math}`C_{1\\rm D}(q) \\propto \\big[1 + (q/q_r)^2\\big]^{-(1+2H)/2}`, flat below {math}`q_r = 2\\pi/(1\\,\\text{mm})` and self-affine above it.{cite:t}`rodriguezHowDetermineSurface2024,perssonAdhesionElasticBody2002` The Hurst exponent {math}`H` sets how much of that height sits in fine features, so {math}`H=0.5` is the rougher surface and {math}`H=0.9` the smoother. **Right:** Normalized band-power readout {math}`\\mathcal{R}` [(%s)](#eq:readoutR) as a function of scanning speed {math}`v`, computed via [(%s)](#eq:readoutQ) with the embedded transfer function {math}`H_{\\rm tot}` plotted in Fig. [%s](#fig:transferFunct) with a Gaussian contact kernel of width {math}`\\ell_c = 50\\,\\mu`m and a flat, memoryless transducer window over 10–2000 Hz. The readout correctly ranks the fine surface as rougher at every speed, but both curves climb steeply with {math}`v`, and their ratio drifts as the window slides across the two spectra. The ambiguity is marked as the horizontal gray line: the output {math}`\\mathcal{R}` for a fine surface scanned at {math}`\\sim 14` cm/s matches that of the coarse surface scanned at {math}`\\sim 18` cm/s.\n:::\n\nA partial passive fix is to build a known length into the sensor. A fixed surface periodicity (as in human fingerprints) stamps a reference line into the spectrum whose measured frequency may be used to infer {math}`v` directly.{cite:t}`manfrediNaturalScenesTactile2014` This requires a single clean reference and a stationary spectrum, but every assumption built into the model (linear contact, stationary statistics, etc.) degrades under natural, active exploration.{cite:t}`rodriguezHowDetermineSurface2024,ryanInteractionMotionTexture2021` Embedding many receptors in a synthetic skin (§[%s](#ssec:skinEmbed)) adds channels but does not obviously resolve the issue. Without an independent measure of {math}`v`, recovering {math}`\\lambda` from {math}`\\omega = qv` seems to require a nonlinear map from the drive’s history to a label. This (together with the biological precedent noted above) suggests that the computation should be treated as a fundamentally temporal one. The next chapter develops physical reservoir computing, a framework for processing time-varying signals in the intrinsic dynamics of materials.\n\n(ch:RC)=\n## Reservoir computing\n\n+++\n### Introduction and abbreviated history\n\n**Reservoir computing** (RC) is a computational paradigm based on recurrent neural networks (RNNs) in which a fixed dynamical system (the **reservoir**) is driven by an input signal {math}`\\u(t)`, its state {math}`\\x(t)` is observed, and a trained readout maps the observation to an output {math}`\\y(t)`. The nonlinear embedding of the input signal into the high-dimensional state space of the reservoir renders otherwise inseparable inputs linearly separable, so that only a memoryless readout (often a simple linear perceptron) needs to be trained. The theory of RC has mostly developed around digital implementations, but in principle any sufficiently rich input-driven dynamical system can act as the reservoir. Computation that exploits the intrinsic dynamics of a physical system is called **physical reservoir computing** (PRC). Realizations of PRC have been reported in photonic, electronic, spintronic, mechanical, fluidic, chemical, and biological substrates.{cite:t}`tanakaRecentAdvancesPhysical2019,nakajimaPhysicalReservoirComputing2020,liangPhysicalReservoirComputing2024`\n\nThe approximation on which the paradigm rests precedes it by some fifteen years, stated in the language of nonlinear systems theory. The fundamental objects are causal time-invariant operators, or **filters** in the engineering jargon. Boyd was interested in approximating arbitrary filters {math}`\\y[\\u]` by Volterra series.{cite:t}`zotero-item-2918` For our purposes, these filters are *computations* we want to design a physical system to perform. Some examples of filters include: the pure delay {math}`\\y(t) = \\u(t-k)`, which asks the system to report on the inputs {math}`k` time steps in the past; products {math}`\\y(t) = \\u(t-i)\\,\\u(t-j)`, which ask it to combine information from two separate moments of the past; and, more generally, reporting the solution of a nonlinear ODE driven by {math}`\\u`. These tasks reappear in §[%s](#ssec:capacity) as test functions against which the information-processing capacity of a physical reservoir can be measured.\n\nBoyd proved that any time-invariant filter with fading memory[^DRq2AS7Q59] can be uniformly approximated by a bank of parallel linear filters that separates points in the space of input histories, followed by a static memoryless nonlinearity. Concretely, in the single-input single-output case, a nonlinear readout {math}`\\hat{y} = p(\\x)` of a linear dynamical system {math}`\\dot{\\x} = \\mathbb{A}\\x + \\mathbf{b}u` can always be made to approximate a desired filter {math}`y[u]`. The coordinates of that system are themselves the filter bank,\n\n```{math}\nx_i(t) = \\int_0^\\infty g_i(s)\\,u(t-s)\\,\\md s \\ , \\qquad g_i(s) \\equiv \\sbrac{e^{\\mathbb{A}s}\\,\\mathbf{b}}_i \\ ,\n```\n\neach kernel decaying exponentially for stable {math}`\\mathbb{A}`. The bank acts as a basis: each coordinate reduces the input history to a single number at time {math}`t`, so they collectively implement a feature map {math}`\\u(\\cdot)\\mapsto\\x(t)` from driving histories to points in {math}`\\mathbb{R}^n`, with the separation condition ensuring that distinct histories can be told apart. Since the bank does not depend on the target, what remains is to train the static nonlinearity {math}`p` (a regression on {math}`\\mathbb{R}^n`). More recent work has shown that, subject to a few technical conditions, a wide class of dynamical systems (including nonlinear ones) can take the place of the linear filter bank. Moreover, a suitable dynamical system can serve many filters at once, with each target {math}`\\hat{y}_i` needing only its own readout function {math}`p_i(\\x)`.\n\nThis structure was rederived in the early 2000s, twice and independently. Jaeger, observed that it was possible to skip the unstable and costly process of training RNNs, and simply train the output weights of a random RNN. The network need only satisfy what Jaeger called the “echo state property”, in essence Boyd’s fading memory. Reservoirs based on this framework are called **echo-state networks** (ESNs).{cite:t}`jaegerEchoStateApproach2010` Around the same time, Maass, Natschlager, and Markram, modeling cortical microcircuits, introduced the **liquid state machine** (LSM): a more generic recurrent medium driven by a continuous input stream and read by a memoryless function.{cite:t}`maassRealTimeComputingStable2002a`\n\nWithin a year of the LSM’s introduction, Fernando and Sojakka provided a vivid and rather literal physical demonstration of the concept.{cite:t}`fernandoPatternRecognitionBucket2003` In their paper “Pattern recognition in a bucket”, they report the following set-up. Motors at the rim of a tank of water transduced inputs (binary values for an XOR task, frequency components of the spoken words “zero” and “one” for a speech task) into agitations of the surface. A camera recorded the resulting interference pattern (the reservoir state) and 50 perceptrons in parallel were trained on the coarsened vectors of pixel values. The raw inputs are linearly inseparable, so a perceptron alone could not perform the task. By first embedding the signals in a high-dimensional space via the nonlinear, temporal mixing of the water, a linear classifier was able to discriminate the inputs. Physical realizations have since been reported in a range of substrates, including organic electrochemical networks,{cite:t}`cucchiReservoirComputingBiocompatible2021` self-organizing nanowire / memristive networks,{cite:t}`milanoMateriaReservoirComputing2022` passive photonic cavities,{cite:t}`vinckierHighperformancePhotonicReservoir2015` the body dynamics of a soft robotic arm,{cite:t}`nakajimaExploitingShorttermMemory2014` liquid egg albumen,{cite:t}`fortulanSustainableReservoirComputing2025` and beads of wine.{cite:t}`fortulanGrapefulDiscoveryReservoir2025`\n\nTheory has continued to develop alongside physical demonstrations. Universality has been established for the discrete-time ESN{cite:t}`grigoryevaEchoStateNetworks2018` and for generic networks of nonlinear springs and dampers,{cite:t}`hauserTheoreticalFoundationMorphological2011` and extended to unbounded stochastic inputs and target filters without fading memory (with approximation defined in an {math}`L^p` sense rather than uniform).{cite:t}`gononReservoirComputingUniversality2018` The information-processing capacity of a fading-memory system was shown to be set by the number of linearly independent observed state variables, establishing a trade-off between memory and expressiveness.{cite:t}`dambreInformationProcessingCapacity2012` Using delay lines, both the network{cite:t}`dionReservoirComputingSingle2018` and the physical reservoir itself{cite:t}`gauthierNextGenerationReservoir2021` have proven dispensable in some architectures.\n\n+++\n(sec:theorymin)=\n### Theory: Models and core metrics\n\nTo keep this document reasonably self-contained, this section lays out the essential theoretical concepts. I begin with echo-state networks, the most developed of the theoretical models, and then generalize the picture to accommodate physical substrates. The presentation herein is far from comprehensive, but reservoir computing is an active and growing field, and there are a number of excellent texts and reviews worth consulting.[^EfpGGbC8qV]\n\n(ssec:esn)=\n#### Echo-state networks\n\nLet {math}`\\u(t) \\in \\mathbb{R}^d` be a {math}`d`-dimensional input signal, {math}`\\x(t) \\in \\mathbb{R}^n` the state of the {math}`n` internal network units, and {math}`\\hat{\\y}(t) \\in \\mathbb{R}^m` the output. Time is discrete: {math}`t\\in \\mathbb{Z}`. Following Jaeger, the state is updated as\n\n```{math}\n:label: eq:ESN\n\n\\begin{align}\n        \\x(t+1) &= \\mathbf{f} \\big(\\mathbf{W}^{\\text{in}}\\u(t+1) + \\mathbf{W}\\x(t)\\big) \\ , \\\\\n        \\hat{\\y}(t+1) &= \\mathbf{W}^{\\text{out}}\\x(t+1)\\ ,\n    \\end{align}\n```\n\nwhere {math}`\\mathbf{f}:\\mathbb{R}^n\\to\\mathbb{R}^n` is a component-wise nonlinearity[^uCaVndussf] and {math}`\\mathbf{W}^{\\text{in}}\\in\\mathbb{R}^{n\\times d}` and {math}`\\mathbf{W}\\in\\mathbb{R}^{n\\times n}` are fixed random matrices. The output weights {math}`\\mathbf{W}^{\\rm out}\\in\\mathbb{R}^{m\\times n}` are to be trained.{cite:t}`jaegerEchoStateApproach2010` For simplicity, feedback and feedthrough are neglected ({math}`\\x` is independent of {math}`\\y`, and {math}`\\y` depends on {math}`\\u` only through {math}`\\x`), and the readout is memoryless[^MpH9848siP].\n\nThe system is said to have **echo states** if {math}`\\x(t)` is uniquely determined by the left-infinite input sequence {math}`\\u(t), \\u(t-1), \\dots`.[^jkJ0IuGZRF] That is, the state is an *echo* of past inputs, with any influence of the initial condition washed out. Without this property the same input can yield different readouts depending on an unobservable history, rendering the dynamics irreproducible. When the property holds, the activation of each unit is (after an initial transient) a function of the input history alone,\n\n```{math}\nx_i(t) \\approx e_i\\big(\\u(t), \\u(t-1), \\u(t-2), \\dots\\big) \\ ,\n```\n\nthe function {math}`e_i` called the **echo function** of the {math}`i`th unit. These are the parallel fading-memory filters of Boyd’s theorem realized in artificial neurons. A sufficiently inhomogeneous network furnishes a rich bank of distinct echo functions, or in Jaeger’s words, “a rich *reservoir* of dynamics ‘tapped’ by the output weights.”{cite:t}`jaegerEchoStateApproach2010`\n\nGiven a target filter {math}`\\y[\\u]`, one drives the network with a training input, records the resulting states, and fits the output weights so that {math}`\\hat{\\y}[\\u](t)` approximates {math}`\\y[\\u](t)` over a training record {math}`t = 1,\\dots,T`. In practice this is a least-squares fit with a regularization parameter {math}`\\lambda`,[^u866OIV6Ss] or ridge regression:\n\n```{math}\n:label: eq:ridge\n\n\\mathbf{W}^{\\rm out} = \\operatorname*{arg\\,min}_{\\mathbf{W}} \\; \\sum_{t=1}^{T} \\big\\| \\y(t) - \\mathbf{W}\\x(t) \\big\\|^2 + \\lambda \\big\\|\\mathbf{W}\\big\\|^2 \\ , \\qquad \\lambda \\geq 0 \\, .\n```\n\nCollecting the states and targets column-wise into {math}`\\mathbf{X} \\in \\mathbb{R}^{n \\times T}` and {math}`\\mathbf{Y} \\in \\mathbb{R}^{m \\times T}`, the closed-form expression for the minimizer is a single {math}`n\\times n` solve:\n\n```{math}\n\\mathbf{W}^{\\rm out} = \\mathbf{Y}\\mathbf{X}^{\\mathsf{T}} \\big(\\mathbf{X}\\mathbf{X}^{\\mathsf{T}} + \\lambda \\mathbf{I}\\big)^{-1} \\ .\n```\n\n(ssec:physform)=\n#### A formulation for physical reservoirs\n\n*Physically* implementing a reservoir computer in a soft matter system requires a more general picture. The formulation that follows is my own, though it is assembled from standard ingredients and takes inspiration from prior work.[^wbvgiEwV4Z] Describe the reservoir state by a field {math}`\\psi(\\mathbf{r},t) :\\Omega\\times \\mathbb{R}\\to \\mathcal{S}` on a spatial domain {math}`\\mathbf{r} \\in \\Omega` in some state space {math}`\\mathcal{S}` with nonlinear, dissipative, autonomous, Markovian dynamics described by an abstract operator {math}`\\mathcal{F}`. In many cases of interest, the inputs will have spatial extent, too. Describe the drive by a field {math}`u(\\mathbf{r},t)` on an input region {math}`\\mathbf{r} \\in \\Omega_{\\rm in} \\subseteq \\Omega`, say a contact patch or a boundary. Then\n\n```{math}\n\\partial_t \\psi(\\mathbf{r},t) = \\mathcal{F}\\big[\\psi(\\cdot,t), \\, \\mathcal{B}[u(\\cdot,t)]\\big]\n```\n\nwhere {math}`\\mathcal{B}` is an operator carrying the input field to a forcing field.[^LAiWGNPiAG] The state {math}`\\psi` is observed through a finite set of {math}`n` numbers {math}`x_i(t)` fixed by a measurement map {math}`\\mathcal{M}`\n\n```{math}\nx_i(t) = \\mathcal{M}_i[\\psi(\\cdot,t)] + \\xi_i(t), \\qquad i = 1,\\dots,n\n```\n\nwith measurement noise {math}`\\xi_i(t)`. In many cases, {math}`\\mathcal{M}_i` will be a linear functional\n\n```{math}\n:label: eq:instrProfile\n\n\\mathcal{M}_i[\\psi] = \\int_{\\Omega} w_i(\\mathbf{r})\\, \\psi(\\mathbf{r},t)\\, \\md\\mathbf{r} \\ ,\n```\n\nwith **instrument profile** {math}`w_i(\\mathbf{r})` fixed by the construction of the device. For example, the charge collected by an electrode deposited on a piezoelectric layer integrates the stress over the electrode footprint,{cite:t}`fradenHandbookModernSensors2010`\n\n```{math}\nx_i(t) = Q_i(t) \\propto \\int_{A_i} d_{3jk}\\, X_{jk}(\\mathbf{r},t)\\, \\md^2\\mathbf{r} \\ ,\n```\n\nso {math}`w_i` is the footprint itself. The profile needn’t coincide with the sensor’s footprint: in a four-electrode resistive measurement, it is set by the current paths through the material. Then the impedance measured between a current-carrying pair and a potential pick-up pair is{cite:t}`pettersenSensitivityTransferImpedance2018`\n\n```{math}\nx_i(t) = Z_i(t) = \\int_{\\Omega} \\rho(\\mathbf{r},t)\\, S_i(\\mathbf{r})\\, \\md\\mathbf{r} \\ ,\n```\n\nthe resistivity field {math}`\\rho(\\mathbf{r},t)` integrated against a sensitivity field {math}`S_i` extending well beyond the electrodes themselves.\n\nAs before, a readout {math}`\\hat{y}(t) = \\mathbf{W}^{\\rm out}\\x(t)` is trained to approximate the desired filter {math}`y[u](t)` by fitting the weights in {math}`\\mathbf{W}^{\\rm out}`, possibly by the ridge regression [(%s)](#eq:ridge). The full chain is then\n\n```{math}\nu(\\cdot,s\\leq t) \\;\\xrightarrow{\\;\\mathcal{B},\\,\\mathcal{F}\\;}\\; \\psi(\\cdot,t) \\;\\xrightarrow{\\;\\mathcal{M}\\;}\\; \\x(t) \\;\\xrightarrow{\\;\\mathbf{W}^{\\rm out}\\;}\\; \\hat{\\y}(t) \\ ,\n```\n\nwhere the maps {math}`\\mathcal{B}`, {math}`\\mathcal{F}`, and {math}`\\mathcal{M}` are fixed by the physics of the hardware, and the final stage is trained. The ESN of §[%s](#ssec:ESN) is recovered as the special case in which the “field” is the vector of unit activations on a discrete set of nodes, time is discretized, {math}`\\mathcal{B} \\to \\mathbf{W}^{\\rm in}`, {math}`\\mathcal{F}\\to \\mathbf{f}` applies both the recurrent mixing and nonlinearity, and the state is observed completely and noiselessly ({math}`\\mathcal{M}_i = 1, \\xi_i = 0`).\n\nWhen the fading-memory requirement is satisfied, each observable becomes a functional {math}`x_i(t) = e_i[u](t)` of the drive history once initial transients have decayed, generalizing the echo functions of §[%s](#ssec:ESN). Each {math}`e_i` is a composite of the input coupling {math}`\\mathcal{B}`, the reservoir dynamics {math}`\\mathcal{F}`, and the measurement {math}`\\mathcal{M}_i`, and it is this composition that constitutes the filter bank. The upshot is that the number and placement of contacts, the instrument profiles they present, and the nature of the input coupling are all aspects of reservoir design. Readout number and placement have received some attention recently,{cite:t}`loveSpatialAnalysisPhysical2023,khairnarSpiderWebinspiredSensing2026,albeattieCriticalityFitzHughNagumoOscillator2024` but general design principles are lacking. Fortunately, adjusting the readout (say, repatterning an electrode layer) is a relatively cheap way to explore a material’s computational capacity.{cite:t}`loveSpatialAnalysisPhysical2023`\n\nThe next sections address fading memory and the capacity measures that quantify expressivity. In the physical framing developed here, both are properties of the composite {math}`e_i` rather than of any single stage. No stage may violate fading memory, whereas the nonlinearity on which capacity depends need only be supplied by one of them. Where it is supplied is a design choice, and §[%s](#ssec:sources) surveys the physical options available at each stage.\n\n(ssec:fadingmemory)=\n#### Fading memory\n\nAn operator has **fading memory** (FM) if inputs that agree over the recent past produce similar outputs in the present.[^JTLA5oBL1U] Boyd makes this precise as follows.{cite:t}`zotero-item-2918` Let {math}`w:\\mathbb{R}_+\\to(0,1]` be decreasing with {math}`w(s)\\to0`, and define the weighted norm on input histories\n\n```{math}\n:label: eq:weightedNorm\n\n\\|\\u\\|_w \\equiv \\sup_{s\\geq 0}\\, \\abs{\\u(-s)}\\,w(s) \\ .\n```\n\nA filter {math}`F` has fading memory with weighting function {math}`w` if it is continuous with respect to the norm [(%s)](#eq:weightedNorm). That is, for every {math}`\\epsilon > 0` there is a {math}`\\delta > 0` such that {math}`\\| \\u - \\mathbf{v}\\|_w < \\delta` implies {math}`\\abs{F[\\u](0) - F[\\mathbf{v}](0)} < \\epsilon`. Since {math}`w \\leq 1`, this is strictly stronger than ordinary continuity. An exponential {math}`w(s) = e^{-s/\\tau}` describes a system ‘forgetting’ on a timescale {math}`\\tau`, so {math}`w` is the formal counterpart of the relaxation spectrum of §[%s](#ssec:bandImp). Boyd’s example of a filter that does *not* possess fading memory is the peak-hold operator {math}`F[\\u](t) = \\sup_{s\\leq t}\\u(s)`, which is continuous but retains a single past event indefinitely, so that no choice of weights {math}`w` can render the remote past negligible.\n\nPhysically, fading memory is a statement about dissipation. A system forgets its initial condition only by contracting volumes in state space, which Liouville’s theorem forbids in purely Hamiltonian evolution. Fading memory can also fail when a driven material keeps a permanent record via plastic deformation, ferroelectric switching, or any hysteretic branch structure that leaves the response dependent on an unobservable history.[^l2l3pAa5XA]\n\nFading memory says that a system forgets, but nothing about how fast. For universality proofs, the relaxation time is irrelevant,{cite:t}`grigoryevaEchoStateNetworks2018` but in a real device it is a crucial consideration. Consider the single-input, single-output pure delay task {math}`y(t) = u(t-k)`, {math}`k \\in \\mathbb{Z}`. The input at lag {math}`k` survives in the state with magnitude {math}`\\sim r^k` for contraction rate {math}`r < 1`, while the readout noise {math}`\\xi` sits at a floor {math}`\\delta`. The recoverable delay is therefore bounded by the noise floor,\n\n```{math}\n:label: eq:delayBound\n\nk \\lesssim \\frac{\\ln \\delta}{\\ln r} \\ .\n```\n\nThe accessible timescales are set by the relaxation spectrum, a manufacturing variable, and as explained below, faster forgetting (smaller {math}`r`) buys sharper separation of recent signals at the cost of memory depth.\n\n(ssec:capacity)=\n#### Information processing capacity\n\nA reservoir well-suited to one task may be poorly suited to another. The **capacity** of a reservoir is a task-specific metric that quantifies how much of a given target a linear readout of the observables can actually recover. Let {math}`y[u](t)` be any target functional of the input history, e.g. a delayed copy of the input, a product of inputs at past times, or the solution of a non-autonomous nonlinear ODE with inputs {math}`u`. Drive the system with an i.i.d. input {math}`u(t)` and fit {math}`\\hat{y}(t) = \\mathbf{w}^{\\sf T}\\x(t)` by least squares. The capacity for that target is the fraction of its variance that the readout recovers:\n\n```{math}\n:label: eq:capacity\n\nc[y] = 1 - \\frac{\\angbr{(\\hat{y}(t) - y(t))^2}}{\\angbr{(y(t)-\\angbr{y})^2}} \\ \\in [0,1] \\ .\n```\n\nA value {math}`c[y] = 1` means perfect reconstruction, and {math}`c[y] = 0` means that the observables contain nothing of {math}`y`.{cite:t}`dambreInformationProcessingCapacity2012` Evaluating {math}`c[y]` on a complete, orthogonal family of functionals (commonly products of Legendre polynomials of the input at various lags) and summing gives the total **information processing capacity** {math}`\\mathrm{Cap} \\equiv \\sum_y c[y]`. Dambre and co-workers proved that for a system with {math}`n` observables {math}`\\x = (x_1,\\dots,x_n)`,\n\n```{math}\n:label: eq:budget\n\n\\mathrm{Cap} = \\sum_y c[y] \\leq  n\n```\n\nwith equality when the system has fading memory and the {math}`n` observables are linearly independent. A reservoir with {math}`n` observables therefore has a fixed amount of capacity to allocate among different tasks, enumerated in the basis functionals. Conventionally, the capacity is split into **memory capacity**[^wM4kBLnscX] and **nonlinearity**. Memory capacity is measured against the delay tasks:\n\n```{math}\ny_k[u](t) = u(t-k) \\ , \\qquad \\mathrm{MC} \\equiv \\sum_{k} c[y^{(1)}_k] \\ .\n```\n\nThe curve {math}`c[y^{(1)}_k]` versus lag {math}`k` is the **forgetting curve**, and [(%s)](#eq:delayBound) is made precise and measurable by identifying the lag at which the forgetting curve reaches the noise floor. Nonlinearity is measured against higher-degree targets (typically products of inputs at distinct past times) and captures the ability to compute polynomial mixtures of the input history. For {math}`n` linearly independent observables, [(%s)](#eq:budget) gives a **memory–nonlinearity trade-off**\n\n```{math}\n\\mathrm{MC} + \\mathrm{NL} = n\n```\n\nwhere {math}`\\mathrm{NL}` is the **nonlinear capacity**. In words, this says that any capacity allocated to nonlinear functionals is unavailable for linear recall, so a system driven harder into its nonlinear regime loses memory depth as it gains expressiveness.{cite:t}`dambreInformationProcessingCapacity2012,inubushiReservoirComputingMemoryNonlinearity2017` The trade-off is easiest to see in a single observable. Suppose {math}`x_1(t) = u(t-1) + \\epsilon\\, u(t-1)u(t-2)` for i.i.d. zero-mean input {math}`u`. The product term is noise to a linear readout attempting to recall {math}`u(t-1)`, and {math}`c[u(t-1)]` decreases as {math}`\\epsilon` grows. The capacity lost is reallocated, reappearing as {math}`c[u(t-1)u(t-2)]`, and the total stays at one.\n\nA division of labor is one response to this trade-off: in a heterogeneous reservoir, a near-linear subsystem may retain memory, while a nonlinear subsystem transforms it.{cite:t}`inubushiReservoirComputingMemoryNonlinearity2017,mohamedMemimpedanceBasedBiomolecularDevice2025` The same division can be accomplished in a spatially extended substrate, with spatially varying memory and nonlinearity within one material. The placement and profile of the measuring instruments then select the mixture seen by the readout.{cite:t}`loveSpatialAnalysisPhysical2023`\n\n+++\n(sec:measurement)=\n### Measurement protocols and benchmarks\n\n(ssec:estcapacity)=\n#### Estimating capacities\n\nThe capacity [(%s)](#eq:capacity) can be estimated from empirical correlations. Let {math}`x_i(t)` be observables measured at times {math}`t = 1,\\dots, T` for the system under some driving, with {math}`t=1` taken after washout of any transients from initialization. The **observation correlation matrix** is defined as\n\n```{math}\n:label: eq:sigma\n\n\\Sigma_{ij} = \\angbr{x_i\\, x_j} = \\frac{1}{T}\\sum_{t=1}^{T} x_i(t)\\, x_j(t) \\ .\n```\n\nThen the least-squares capacity for some target {math}`y` (zero-mean, WLOG) can be estimated by\n\n```{math}\n:label: eq:capacityEstimator\n\nc[y] =  \\mathbf{v}^{\\mathsf{T}} \\mathbf{\\Sigma}^{-1}\\mathbf{v}\\, , \\qquad \\mathbf{v}\\equiv \\frac{\\angbr{y\\,\\mathbf{x}}}{\\sqrt{\\angbr{y^2}}} \\ ,\n```\n\nwhere {math}`\\angbr{y\\,x_i}` is the target-observable correlation. For example, for the {math}`k`-step delay-recall task, {math}`\\angbr{y\\, x_i} = \\frac{1}{T}\\sum_{t=1}^{T} u(t-k)\\, x_i(t)`. Equation [(%s)](#eq:capacityEstimator) can be read as the fraction of the target’s variance recovered by projecting it onto the recorded observables. Since {math}`\\mathbf{\\Sigma}` depends only on the device and the drive, it can be collected just once and computed across many different targets.\n\nThe estimator [(%s)](#eq:capacityEstimator) is biased to inflate capacity on finite records due to chance correlations. Over a large basis, these spurious correlations can significantly overestimate capacity.{cite:t}`dambreInformationProcessingCapacity2012` One way to address this is to build an empirical null (e.g. a target built from an independently drawn input record) and zero any capacity that does not exceed the null before summing.\n\nThe bound in Eq. [(%s)](#eq:budget) counts linearly independent observables only. When the correlation matrix {math}`\\mathbf{\\Sigma}` does not have full rank, the inverse in Eq. [(%s)](#eq:capacityEstimator) is replaced by the pseudoinverse, and the total capacity is bounded by {math}`\\mathrm{rank}(\\mathbf{\\Sigma})` rather than by the nominal channel count.{cite:t}`dambreInformationProcessingCapacity2012` Observables drawn from a spatially extended substrate will always be correlated to some degree, with dense readout arrays found to be strongly co-linear in practice.{cite:t}`khairnarSpiderWebinspiredSensing2026` The eigenvalue spectrum of {math}`\\mathbf{\\Sigma}` is therefore a task-agnostic measure of how many independent observables a device actually has over a given input range. A tail of eigenvalues at or below the noise floor indicates that some transducers may need to be repositioned. Redundancy is not necessarily wasted, however, as averaging correlated channels suppresses the measurement noise on the dominant modes.\n\n(ssec:measfm)=\n#### Measuring fading memory\n\nPulse–relaxation data is one way to probe the memory of a material: apply a delta-like input and record the return of the observables to baseline, reading the relaxation timescales from the measured curve[^qFB4MBNCwm]. This is useful for identifying accessible timescales and is *suggestive* of fading memory, but it does not on its own demonstrate convergence under a sustained drive.\n\nAnother approach is to drive the device with two distinct conditioning sequences {math}`\\u_1`, {math}`\\u_2` on {math}`t<0` and then apply the *same* drive {math}`\\u^+` to both for {math}`t> 0`, recording the observables {math}`\\x_1(t>0)` and {math}`\\x_2(t>0)`. If the two response records converge to within some noise floor and stay there, the device has fading memory over that drive. If they settle onto persistently different responses, it does not.{cite:t}`cucchiHandsonReservoirComputing2022` The rate at which {math}`\\|\\x_2(t)-\\x_1(t)\\|` converges to the noise floor {math}`\\varepsilon \\ll 1` as {math}`t \\to \\infty` estimates the conditional Lyapunov exponent of the driven system.{cite:t}`inubushiReservoirComputingMemoryNonlinearity2017` Note that a material that has fading memory at small drive can exhibit hysteresis for large drives, so the result is a property of the operating regime, and tests should be run at the amplitudes and frequencies relevant to the target application.\n\nLastly, the capacity measurements of §[%s](#ssec:estCapacity) can provide evidence of fading memory. The forgetting curve ({math}`c[y^{(1)}_k]` as a function of the lag {math}`k`) is near unity for small {math}`k` and then decays to the empirical null as {math}`k` increases for a device with fading memory. Moreover, by the equality condition of Eq. [(%s)](#eq:budget), a total capacity approaching {math}`\\mathrm{rank}(\\mathbf{\\Sigma})` is attainable only by a system with fading memory, so a saturated or near-saturated capacity provides evidence (albeit limited evidence) of fading memory.{cite:t}`dambreInformationProcessingCapacity2012`\n\n(ssec:benchmarks)=\n#### Benchmarks\n\nA conventional battery of tasks for quantifying the performance of reservoir computers exists, which have the virtue of comparability with the literature. A tutorial review and critique of standard benchmarks is given by Wringe and coworkers.{cite:t}`wringeReservoirComputingBenchmarks2025` The most common of these are described below.\n\n**Delay recall** and **polynomial probes** are the capacity measurements already described. **Parity tasks** (typically {math}`y(t) = \\prod_{i=0}^{p} \\mathrm{sgn}\\,u(t-i)`) demand both memory and nonlinearity jointly. The **NARMA-{math}`n`** family{cite:t}`atiyaNewResultsRecurrent2000` tests emulation of a mildly nonlinear system with {math}`n`-step memory:\n\n```{math}\ny(t+1) = a_1y(t) + a_2 y(t) \\sum_{i=0}^{n-1} y(t-i) + b\\, u(t-n+1) u(t) + c \\ .\n```\n\nThis is the *de facto* standard test in the RC literature, though parameter values vary widely across reports and the recursion can diverge.{cite:t}`wringeReservoirComputingBenchmarks2025` **Chaotic time-series prediction** (Mackey–Glass, Santa Fe laser) and **spoken-digit classification** are also standard. At least two open-source standardizations of this battery have been developed. {sc}`RCbench`{cite:t}`pilatiRCbenchUnifiedFramework2026` computes memory capacity, NARMA-{math}`n`, kernel and generalization rank, and nonlinear transformation tasks under consistent preprocessing and statistics from recorded reservoir data. {sc}`OpenPRC`{cite:t}`phalakOpenPRCUnifiedOpenSource2026` is a Python package for mechanical substrates that puts simulated and video-tracked experimental trajectories into a common format, so both pass through the same readout training and capacity analysis, and adds a GPU physics engine and routines for optimizing substrate parameters.\n\nUltimately, benchmarks are merely a proxy, and task-independent metrics correlate imperfectly with task performance.{cite:t}`wringeReservoirComputingBenchmarks2025` If one has a specific application in mind, the most informative benchmark will always be the application itself.\n\n+++\n(sec:implement)=\n### Material implementation\n\n(ssec:sources)=\n#### Sources of memory and nonlinearity in protein fibers, and other considerations\n\nThe appropriate relaxation spectrum is task-specific. A {math}`10\\,\\text{s}` relaxation spans a thousand cycles of a {math}`100\\,\\text{Hz}` drive, relevant to the texture problem of §[%s](#ssec:pacStudy). Modes driven faster than their own relaxation time respond quasi-elastically[^gIV5jXSP4n] and thus the fast structure passes through untransformed.\n\nViscoelastic relaxation is among the most obvious sources of memory, and it has been measured directly at the fibril level. Coupled creep and stress-relaxation tests on single collagen fibrils isolated from sea cucumber dermis fit a two-term Maxwell–Weichert model with a fast time constant of {math}`7 \\pm 2` s and a slow one of {math}`102 \\pm 5` s, at an elastic modulus of {math}`123 \\pm 46` MPa.{cite:t}`shenViscoelasticPropertiesIsolated2011a` Direct engineering of the viscoelastic relaxation spectrum has been demonstrated most clearly in hydrogels, with timescales governed by the rate at which reversible cross-links detach and reform.{cite:t}`rossowRelaxationDynamicsTransient2014,grindyEngineeringElasticityRelaxation2016` For example, increasing the ratio of {math}`\\mathrm{Zn}^{2+}` to histidine was reported to increase the relaxation time from 6.6 s to roughly 1250 s in a star-PEG hydrogel.{cite:t}`tunnBioinspiredHistidineZn22019`\n\nIon transport offers memory on quite different timescales. Interfacial ion dynamics have been used as a reservoir directly in a synthetic two-terminal device, with transient currents decaying on timescales of microseconds, tunable through parameters that affect the medium’s viscosity.{cite:t}`kohReservoirComputingDielectric2022` Much slower ionic effects are available as well: in one report with a layered hydrogel, ions accumulated and dispersed along different paths, and the resulting lag in the internal potential reproduced both short- and long-lived changes in response strength akin to those seen at biological synapses.{cite:t}`wangIonicPotentialRelaxation2024`\n\nNonlinearity may be the easier requirement to fulfill. Nonlinear mechanical response is ubiquitous in protein fiber networks, e.g., through strain-stiffening and nonlinear electrical response.{cite:t}`motteStrainStiffeningCollagen2013,ghadaiKovacslikeMemoryEffect2025` Geometry can also provide nonlinearity: a network of linear springs can generate nonlinear network dynamics,{cite:t}`kiyabuGeometricNonlinearity2D2026` so it may be possible to design a fiber assembly that exhibits a desired nonlinear mechanical response even under weak drive. Finally, mounting compliance may be an important design variable: in a nanomechanical resonator, relaxing the clamping condition amplifies the effective geometric nonlinearity of the driven mode by more than an order of magnitude.{cite:t}`liCascadeModalInteractions2026`\n\nViscoelastic relaxation can be pushed into its nonlinear regime, potentially offering both memory and nonlinearity by a single mechanism. A collagen network driven into its strain-stiffening regime shows a memory of prior deformation that appears as a non-monotonic stress relaxation.{cite:t}`ghadaiKovacslikeMemoryEffect2025` However, at larger strains fibers slide past and merge with one another, irreversibly remodeling the network.{cite:t}`kimStressinducedPlasticityDynamic2017` Hysteresis of this kind is generic in polymers{cite:t}`reiterMemorizingCapacityPolymers2020` and bounds the usable input range, as excessive drives may irreparably change the reservoir and necessitate retraining of the readout.\n\nNonlinearity can be realized in the measurement layer {math}`\\mathcal{M}` rather than the dynamics layer {math}`\\mathcal{F}`. One study of an optomechanical reservoir made use of the nonlinear dependence of photon loss on the curvature of optical fibers.{cite:t}`kiyabuOptomechanicalReservoirComputing2025` More generally, any transducer driven past its linear regime could contribute nonlinearity at {math}`\\mathcal{M}`. It may also be possible to introduce nonlinearity via the input coupling {math}`\\mathcal{B}`.{cite:t}`maVersatileRobustReservoir2025` However, the sties are not interchangeable, and nonlinearity applied to the input alone carries no memory, so if {math}`\\mathcal{F}` and {math}`\\mathcal{M}` are both linear, the reservoir cannot form products across distinct past times.\n\nSimulations and physical prototypes of compliant networks based on orb-weaver webs demonstrate that the memory–nonlinearity balance can be adjusted through mechanical parameters set at assembly.{cite:t}`khairnarSpiderWebinspiredSensing2026` For example, nonlinear capacity was seen to decrease monotonically with pretension and fiber spacing, with memory capacity rising with tension up to a peak, before falling for very high tension. The same study evaluated strategies for reducing the number of readouts. Heterogeneity has also been demonstrated as an important design element. A device combining fast, strongly nonlinear elements with slower, near-linear ones is able to handle tasks at two timescales.{cite:t}`mohamedMemimpedanceBasedBiomolecularDevice2025` As discussed in §[%s](#sec:survey), alignment enhances piezoelectric response{cite:t}`yucelStructuralOriginsSilk2011` and ionic conductivity,{cite:t}`navarroHarnessingPrioninspiredAmyloid` but heterogeneity supports a diverse set of internal dynamics to read from.{cite:t}`mohamedMemimpedanceBasedBiomolecularDevice2025,kiyabuGeometricNonlinearity2D2026` Thus for some mechanisms there will be a tension between the need for heterogeneity on one hand, and signal strength on the other.\n\n(ssec:visco2)=\n#### Visco-piezoelectric fiber: Reprise\n\nIn §[%s](#ssec:viscopiezo), I introduced a one-dimensional model of a single visco-piezoelectric fibril, driven by axial stress and read as an open-circuit voltage. The model has memory (via viscoelastic relaxation) and nonlinearity (via strain-stiffening and other effects). However, it has only a single observable, so its total capacity is trivially capped at {math}`\\mathrm{rank}\\,\\mathbf{\\Sigma}=1`, so the model cannot act as a useful reservoir on its own. It is still instructive to see the application of the measurement protocols of §[%s](#sec:measurement) when applied to a constitutive material model \\[Fig. [%s](#fig:oneFiberCapacity)]. The system was driven by an input sequence {math}`u(t) \\in [-1,1]`, uniform and i.i.d. over timesteps {math}`\\Delta t = 0.05\\,t_0`, with {math}`t_0 = \\max_k \\tau_k` the slowest system relaxation time, and read in open circuit as the scalar voltage {math}`y(t)` \\[Fig. [%s](#fig:oneFiberCapacity)(a)]. Material parameters are those of Fig. [%s](#fig:viscopiezoISV), with the nonlinear groups {math}`(g, g_e, \\ell_k)` reduced to 0.4 of their quoted values to keep the system inside its domain of applicability, equivalent to driving the same fiber at 0.4 of the reference amplitude (App. [A](#app:viscopiezo)).\n\n:::{figure} https://thestacks-01.s3.amazonaws.com/publications/01M75CABVGH3G9RJZ60XNHCRJF/media_7910d0eee440870c41a308ef88f39a890790a266f50f68b54e5506d561011650.svg\n:name: fig:oneFiberCapacity\n:align: center\n\nSingle visco-piezoelectric fiber read through one electrode. **(a)** i.i.d. drive {math}`u(t)` and the open-circuit response {math}`y(t)` of the model; **(b)** scatter plot of {math}`y(t)` vs. {math}`u(t)` with fit {math}`y = -1.00\\,u + 0.09` recovering {math}`R^2 = 0.966` of the readout variance; **(c)** measured forgetting curve {math}`c[u(t-k)]`, with empirical null marked (gray dotted line).\n:::\n\nThe readout is very nearly a scaled copy of the input: a linear regression of {math}`y` on the instantaneous drive recovers {math}`R^2 = 0.966` of the readout variance at a fitted slope of -1 \\[Fig. [%s](#fig:oneFiberCapacity)(b)], so the model is essentially an inverting amplifier. The estimate {math}`\\mathrm{MC} = 0.997` of the capacity allocated to linear memory nearly saturates the budget, and nearly all of it sits at zero lag \\[Fig. [%s](#fig:oneFiberCapacity)(c)]. In hindsight, this is unsurprising. The model is based on a weakly nonlinear expansion, so its quadratic terms enter the output at {math}`O(g, g_e, \\ell_k)` in amplitude. Capacity is a fraction of recovered variance, so these contribute only at second order. Appreciable nonlinear capacity would require {math}`g,g_e` or {math}`\\ell_k` of order unity, where the truncation of {math}`\\hat{\\zeta}` and the domain condition on Eq. [(%s)](#eq:strainRoot) both fail. The concentration at zero lag has a different origin, arising from the dominance of the instantaneous strain’s contribution to the open-circuit voltage over the weaker internal-mode contribution {math}`\\sum_j \\Delta^e_j \\xi_j` [(%s)](#eq:openCircuitE).\n\nA physical system realizing these dynamics, embedded in the synthetic skin and capsule of §[%s](#ssec:pacStudy), may perform useful pre-processing and transduction for a downstream discriminator (perhaps even providing the input to a conventional digital echo-state network in a silicon central nervous system). This is a legitimate device target, but it is not a reservoir. Given that I did not construct the model as a candidate reservoir in the first place, finding that it fails as one is not much of a discovery, and each cause of the failure is a modeling choice, so the result says little about what any given protein fiber system can compute. Raising {math}`\\mathrm{rank}(\\mathbf{\\Sigma})` with more observables, carrying the model past weak nonlinearity, and matching the drive to the relaxation spectrum are the key steps toward a more appropriate model; suggested extensions are discussed in §[%s](#ssec:conclusion). Measuring and improving the information-processing capacity of such models, in conjunction with real material prototyping, is a strong target for future work.\n\n+++\n(sec:challenges)=\n### Known & unknown challenges\n\nThe field remains, in many ways, pre-paradigmatic. The universality results of §[%s](#sec:theoryMin) are existence proofs, so they neither guide the construction of a reservoir for a given task nor predict the capacity a specific substrate will deliver. Current hardware optimization proceeds in practice by trial and error.{cite:t}`liangPhysicalReservoirComputing2024` Task-independent metrics correlate imperfectly with task performance, and matching a reservoir to a task remains an open problem.{cite:t}`chrol-cannonCorrelationReservoirMetrics2014,wringeReservoirComputingBenchmarks2025`\n\nThat physical reservoir computing works across a range of substrates is well established. Whether it is the best way to perform any particular computation is far less clear. After two decades, “broadly convincing ‘killer-applications’ beyond synthetic and lab experiments are still not available,” and reservoir computing performs markedly better on synthetic chaotic sequences than on real-world series such as weather, stock and wind-power data.{cite:t}`yanEmergingOpportunitiesChallenges2024` Nonlinear vector autoregression is provably equivalent to a linear reservoir read by a polynomial function, and Gauthier and co-workers report that fitting the autoregression directly matches or exceeds a conventional reservoir on standard benchmarks at a fraction of the cost.{cite:t}`gauthierNextGenerationReservoir2021` Those benchmarks are noise-free digital simulations of low-dimensional chaotic systems, so they do not necessarily hold in general. It has also been observed that software reservoirs typically outperform their physical counterparts under comparable configurations, the difference attributed to hardware noise, though exceptions arise where the richer dynamics of a physical substrate happen to suit the task.{cite:t}`liangPhysicalReservoirComputing2024` Neither finding rules out a particular physical reservoir winning on accuracy for a particular task, but together they suggest that accuracy may not be the best claim on which to rest a development program.\n\nThe stronger case *in favor of* reservoir computing concerns energy and latency. A passive substrate computes with its own relaxation dynamics at no marginal energy cost per use, and co-locating sensing with computing means the nonlinear, history-dependent part of the transformation is performed where the signal arrives. Only the readout, a set of observables already carrying the computational output in linearly separable form, needs to be transmitted and processed elsewhere. Nonetheless, the advantage is largely unrealized at present. Existing physical reservoirs rely on conventional electronics for input encoding, readout, and environmental control, potentially undermining claims to lower energy use.{cite:t}`nakajimaPhysicalReservoirComputing2020,yanEmergingOpportunitiesChallenges2024` In nearly all reported work, the substrate is a laboratory instrument wired to a computer that records the state and performs the readout regression offline. A device in which the reservoir and its trained readout are built as one has been demonstrated only in memristive electronics,{cite:t}`liangPhysicalReservoirComputing2024` and nothing comparable exists for soft, mechanical, or wet substrates.\n\nReading a soft, spatially extended substrate like a protein-fiber mat is also intrinsically difficult. Probing with tens to thousands of contacts interfaced to analog-to-digital converters is often infeasible on sampling-bandwidth and storage grounds,{cite:t}`yanEmergingOpportunitiesChallenges2024` while the observables collected from a continuous medium are strongly correlated, so the usable budget is {math}`\\mathrm{rank}(\\mathbf{\\Sigma}) \\ll n` (§[%s](#ssec:estCapacity)).\n\nStability is a further concern. Hardware drift requires calibration to be repeated, so training cannot be treated as a one-off optimization.{cite:t}`yanEmergingOpportunitiesChallenges2024` Soft materials drift with temperature, humidity and light exposure, and can be difficult to characterize even when stable.{cite:t}`howardOperationalisingReproducibilitySoft2026` Physical substrates also rarely meet the device-to-device uniformity expected of conventional hardware,{cite:t}`cucchiHandsonReservoirComputing2022,maVersatileRobustReservoir2025` the disorder that supplies rich dynamics being the same disorder that resists replication.\n\nReadout integration, drift compensation and electrode economy are engineering problems: open, but perhaps tractable. Identifying the tasks and settings in which a physical reservoir beats the alternatives is a different, and perhaps harder question. Protein-based systems may offer rich dynamics and tunable relaxation timescales, but their suitability to the most ambitious visions of this project is by no means settled.\n\n+++\n(ssec:conclusion)=\n### Outlook\n\nNo protein fiber device has yet been operated as a physical reservoir. The nearest analogous systems studied for reservoir computing applications are synthetic: a conductive electrospun polyamide mat contacted at several terminals used to drive a simulated reservoir,{cite:t}`prudnikovMultiTerminalNonwovenStochastic2023` and the nylon fiber networks of §[%s](#ssec:sources).{cite:t}`khairnarSpiderWebinspiredSensing2026` The framing of §[%s](#sec:physComp) placed transduction and computation on one axis, determined by the richness of the I/O map {math}`\\u \\to \\y`, or by the size of the problem space for which the AR diagram (Fig. [%s](#fig:ARmap)) commutes. Here, design targets for future work on protein-fiber-based PRC are laid out similarly, ordered roughly by how much computational labor is performed by the material itself.\n\n1.  *Instantaneous pre-processing.* The material transforms the input signal to support a simple downstream reader’s recovery of the relevant information. This is the role played by the corpuscle model of §[%s](#ssec:pacStudy): a fixed, passive, untrained front-end that delivers the texture band to the transducer while suppressing the non-information-bearing content of the forcing. Kondo and co-workers demonstrate this in a nonlinear setting: a curved sensor stage encodes softness and pressure jointly, and a simulated ESN downstream does the computing.{cite:t}`kondoSoftnessPressurePerceptiveElectronic2025` The sensor platform plays the role of a mechanoreceptor, and the ESN is the central nervous system.\n\n2.  *Temporal reservoir sensing.* Fading memory extends the transformation over a time window to discriminate temporal inputs with only a downstream perceptron. This is where the texture problem of §[%s](#ssec:pacStudy) was left: the scanning-speed ambiguity of Fig. [%s](#fig:readoutAmbiguity) cannot be resolved from an instantaneous reading. Whisker-inspired sensors designed for real-time terrain classification are one realization of this target.{cite:t}`yuTaperedWhiskerReservoir2023` A stronger demonstration would reproduce a prescribed nonlinear functional to a stated tolerance. Perhaps the nearest mechanical precedent from the literature is a single nonlinear beam coupled to a delay line, which computed the a parity function of past inputs, though it still relied substantially on external electronics.{cite:t}`dionReservoirComputingSingle2018`\n\n3.  *Closed-loop operation.* In the targets above, the signal passes through the material once. Closing the loop returns the output as a drive on the same material, so that sensing, computation and actuation occur in one device whose own response becomes part of its input. This is the material as both mechanism and controller. Soft-bodied and tensegrity reservoirs come nearest,{cite:t}`nakajimaExploitingShorttermMemory2014,terajimaMultifunctionalPhysicalReservoir2025` though error and convergence guarantees for reservoir-based controllers remain unresolved,{cite:t}`yanEmergingOpportunitiesChallenges2024` in part because the properties that make a reservoir trainable are established for open-loop driving and do not necessarily survive feedback.\n\nI offer one further target, more as a speculation than as a proposal. Under the material drift discussed in §[%s](#sec:challenges), a trained readout will continue to confidently report ever-less-accurate outputs. This is awkward, because recalibration against a laboratory reference may be impractical after deployment. But consider human sensing: we too undergo some ‘material drift’ over time, and having a multitude of sensor inputs (backed, of course, by a complex central nervous system) is a great advantage. One input may correct for the failure of another. Standing on one leg is easy until your eyes are closed, and a conversation in a noisy room becomes more intelligible when the speaker’s mouth is visible. Calluses may thicken and alter the mechanical properties of the fingertip, but we scarcely expect to become confused about what we are touching so long as our other senses remain operational. Suppose then that several devices observe the same signal, not necessarily by the same mechanism. Systematic and growing disagreement would identify the drifting unit, and the consensus of the remainder would give a target against which the drifting unit’s readout could be retrained. There is some precedent for this idea in blind calibration of sensors,{cite:t}`balzanoBlindCalibrationSensor2007` and separately, ensemble averaging over parallel copies of a reservoir driven by a common input has been shown to remove noise and temporal fluctuations from the observed state, restoring (and at times exceeding) noise-free performance.{cite:t}`nakamuraEnsembleReservoirComputing2026` To my knowledge, these ideas have not been combined for continual recalibration of an ensemble of drifting physical reservoirs.\n\nOne obvious direction for future work is to extend the model constructed in §[%s](#app:LSmodel) and Appendix [C](#app:caseStudy) to describe a large number of encapsulated transducers in synthetic skin, perhaps modeled on the variety of mechanoreceptors in humans. The model as constructed cannot address such a device. What is required is a spatially-extended continuum through which disturbances propagate. Built this way, the electrode integrals of Eq. [(%s)](#eq:instrProfile) could be evaluated on a real strain field, making the instrument profile {math}`w_i(\\mathbf{r})` a design variable to be analyzed systematically against information-processing capacity. This survey did not find any published report combining the required elements. Treatments of coupled compliant networks as reservoirs are well-developed but read displacement directly,{cite:t}`hauserTheoreticalFoundationMorphological2011,kiyabuGeometricNonlinearity2D2026,khairnarSpiderWebinspiredSensing2026` while continuum models of mechanotransduction in skin resolve the strain field at the receptor but have never been analyzed for capacity.{cite:t}`sripatiContinuumMechanicalModel2006,dandekar3DFiniteElementModels2003` What the information-processing capacity of such a model would turn out to be is an open and, to my mind, rather appealing question. The original ‘design’, at any rate, works well enough for humans.\n\n+++\n(app:viscopiezo)=\n## Appendix A: One-dimensional visco-piezoelectric model\n\n+++\n### Thermodynamic foundations\n\nIn this appendix, I derive the one-dimensional visco-piezoelectric model of Sec. [%s](#ssec:viscopiezo). Following work by Coleman and coworkers on the thermodynamics of materials with memory,{cite:t}`colemanThermodynamicsMaterialsMemory1964,colemanThermodynamicsElectromagneticFields1971`[^XcYsH26Z9g] define the **free enthalpy density** {math}`\\hat{\\zeta}(t)` of the fiber, whose value at time {math}`t` depends on the entire strain and field histories:\n\n```{math}\n\\hat{\\zeta}(t) = \\hat{\\zeta}\\sbrac{x(t')\\vert_{t'\\leq t}\\,, E(t')\\vert_{t'\\leq t}} \\ .\n```\n\nOne can show that the dissipation contains terms proportional to {math}`\\dot{x}` and {math}`\\dot{E}`, both free variables, with coefficients {math}`(X - \\partial_{x}\\hat{\\zeta})` and {math}`-(D + \\partial_{E}\\hat{\\zeta})`. Were either coefficient nonzero, a protocol to perform some net work with zero dissipation could be selected, so thermodynamic consistency requires both to vanish identically. This yields{cite:t}`colemanThermodynamicsMaterialsMemory1964`\n\n```{math}\n:label: eq:stressInduction\n\nX(t) = \\partial_{x(t)}\\hat{\\zeta} \\ , \\qquad D(t) = -\\partial_{E(t)}\\hat{\\zeta} \\ .\n```\n\nHere the derivatives are taken with respect to the present values of {math}`x` and {math}`E`.\n\nThe non-Markovianity (history dependence) of the free enthalpy in the strain and electric field indicates the presence of hidden variables. Introduce an internal state vector {math}`\\bm{\\xi}(t) = (\\xi_1,\\dots,\\xi_N)` such that the free enthalpy *is* Markov in {math}`(x,E,\\bm{\\xi})`.{cite:t}`colemanThermodynamicsInternalState1967` These do not need to exhaust all of the system’s degrees of freedom, only the slow internal rearrangements (e.g., ionic redistributions). Take {math}`x=E=\\bm{\\xi}=0` to be the rest state and set (WLOG) {math}`\\hat{\\zeta}(0,0,0)=0`. Taylor expanding {math}`\\hat{\\zeta}` about its rest state and retaining up to cubic terms that are at most linear in {math}`E` and {math}`\\bm{\\xi}` yields\n\n```{math}\n:label: eq:a\n\n\\begin{align}\n        \\hat{\\zeta}(x,E,\\bm{\\xi}) &= \\tfrac{1}{2} c_0 x^2 - \\tfrac{1}{2}\\varepsilon_0 E^2 - e_0 x E \\\\\n            &\\qquad +\\, \\tfrac{\\gamma}{3}x^3 - \\tfrac{\\gamma_e}{2}x^2 E\\\\\n            &\\qquad + \\, \\sum_{k=1}^N\\big[ \\tfrac{1}{2}a_k \\xi_k^2 - \\xi_k(\\alpha_k x + \\beta_k E - \\lambda_k x^2) \\big] \\ .\n    \\end{align}\n```\n\nFrom this, obtain by differentiation \\[Eq. [(%s)](#eq:stressInduction)]\n\n```{math}\n:label: eq:constitutive\n\n\\begin{align}\n        X &= c_0 x + \\gamma x^2 - e_0 E - \\gamma_e x E - \\sum_k (\\alpha_k - 2\\lambda_k x)\\,\\xi_k \\ ,  \\\\\n        D &= e_0 x + \\varepsilon_0 E + \\tfrac{\\gamma_e}{2}x^2 + \\sum_k \\beta_k \\xi_k \\ . \n    \\end{align}\n```\n\nThe linear terms in {math}`x` and {math}`E` in [(%s)](#eq:constitutive) reproduce the standard constitutive equations of piezoelectricity with {math}`c_0`, {math}`e_0`, and {math}`\\varepsilon_0` respectively the high-frequency limits of the elastic modulus, piezoelectric coupling, and permittivity at the rest state. These terms characterize the instantaneous response at fixed {math}`\\bm{\\xi}`.\n\nIn line [(%s)](#eq:a), the term {math}`\\tfrac{1}{3}\\gamma x^3` is the leading elastic anharmonicity, producing a stiffness that grows with strain, as observed in compressed collagen.{cite:t}`motteStrainStiffeningCollagen2013,karunaratneNanoscaleMechanismsExplain2018` The term {math}`-\\tfrac{1}{2}\\gamma_e x^2 E` is a nonlinear coupling between the field and the strain. The cubics {math}`xE^2` and {math}`E^3` in {math}`\\hat{\\zeta}` have been excluded since in open-circuit sensing, the field is generated by the strain, so it is itself first-order small.\n\nSince the internal state vector is not directly observable, its coordinates may be chosen freely. It is convenient to take them to be normal modes, which simultaneously diagonalize friction and stiffness so that no cross-terms enter. Each mode then relaxes at first order,\n\n```{math}\n:label: eq:ximotion\n\nb_k \\dot{\\xi}_k = \\alpha_k x + \\beta_k E - \\lambda_k x^2 - a_k \\xi_k \\ ,\n```\n\nwith time constants {math}`\\tau_k = b_k / a_k` set by friction coefficient {math}`b_k` and stiffness {math}`a_k > 0`. A finite collection of modes {math}`\\xi_k` produces a discrete relaxation spectrum, which is commonly assumed in viscoelastic modeling, if not perfectly general.{cite:t}`malkinUseContinuousRelaxation2006` As a sanity check, the entropy production under these dynamics is {math}`\\sigma = \\sum_k b_k \\dot{\\xi}_k^2 \\geq 0`.{cite:t}`colemanThermodynamicsMaterialsMemory1964` The weights {math}`\\alpha_k` and {math}`\\beta_k` determine the response of mode {math}`k` to strain and field, and the cross-terms {math}`-\\lambda_k x^2` in [(%s)](#eq:ximotion) and {math}`2\\lambda_k x \\xi_k` in [(%s)](#eq:constitutive) (from the cubic {math}`\\lambda_k \\xi_k x^2`) represent strain-stiffening via the relaxation modes. I have excluded cubics that are nonlinear in {math}`\\bm{\\xi}` purely for the purposes of tractability, as retaining those terms would make the relaxation times themselves dependent on the drive amplitude.\n\n+++\n### Non-dimensionalization\n\nLet {math}`x_0` be a characteristic amplitude of the driving strain. Then we have natural scales {math}`E_0 = e_0 x_0 / \\varepsilon_0` for the field, {math}`\\xi_{0k} = \\alpha_k x_0 / a_k` for internal mode {math}`\\xi_k`, and {math}`X_0 = c_0 x_0` and {math}`D_0 = e_0 x_0` for stress and displacement. The linear response of the system is then characterized by four families of dimensionless numbers,\n\n```{math}\nk_0^2 = \\frac{e_0^2}{c_0 \\varepsilon_0} \\ , \\qquad\n    \\Delta_k^c = \\frac{\\alpha_k^2}{a_k c_0} \\ , \\qquad\n    \\Delta_k^e = \\frac{\\alpha_k \\beta_k}{a_k e_0} \\ , \\qquad\n    \\tilde{\\tau}_k = \\frac{\\tau_k}{t_0} \\ .\n```\n\nThe first is the electromechanical coupling factor, or the fraction of elastically stored energy available for conversion to electrical form, with {math}`k_0^2 < 1` required for stability. {math}`\\Delta_k^c` (resp. {math}`\\Delta_k^e`) is the fraction of the elastic modulus (resp. the piezoelectric coupling) removed by mode {math}`k` as it relaxes. Note that {math}`\\Delta_k^c > 0` necessarily, while {math}`\\Delta_k^e` may take either sign, as observed in ferroelectric polymers.{cite:t}`furukawaComprehensiveUnderstandingPiezoelectricity2023` Finally, {math}`\\tilde{\\tau}_k` is the relaxation time of mode {math}`k` measured in units of the slowest relaxation time, {math}`t_0 = \\max_k \\tau_k`.\n\nThe nonlinearities contribute three further groups of dimensionless numbers,\n\n```{math}\ng = \\frac{\\gamma x_0}{c_0} \\ , \\qquad\n    g_e = \\frac{\\gamma_e x_0}{e_0} \\ , \\qquad\n    \\ell_k = \\frac{\\lambda_k x_0}{\\alpha_k} \\ ,\n```\n\nrespectively the fractional stiffening of the modulus, the ratio of quadratic to linear charge, and the ratio of quadratic to linear drive of mode {math}`k`, all evaluated at the drive amplitude {math}`x_0`. Each scales linearly with {math}`x_0`, and the input amplitude enters only through these numbers. Thus the model is “weakly nonlinear” if {math}`g, g_e, \\ell_k \\lesssim 1`. In total, the model comprises {math}`3 + 4N` numbers: {math}`(k_0^2, g, g_e)` together with {math}`(\\Delta_k^c, \\Delta_k^e, \\tilde{\\tau}_k, \\ell_k)` for each mode.\n\nIn a blatant abuse of notation, let us rescale every variable while retaining the original symbols, taking all variables dimensionless henceforth:\n\n```{math}\n:label: eq:nondimSystem\n\n\\begin{align}\n        X &= x + g x^2 - k_0^2 E - g_e k_0^2\\, x E\n             - \\sum_k \\Delta_k^c (1 - 2\\ell_k x)\\, \\xi_k \\ , \\\\\n        D &= x + E + \\tfrac{g_e}{2}x^2 + \\sum_k \\Delta_k^e \\xi_k \\ , \\\\\n        \\tilde{\\tau}_k \\dot{\\xi}_k &= x + k_0^2 \\tfrac{\\Delta_k^e}{\\Delta_k^c}\\, E\n             - \\ell_k x^2 - \\xi_k \\ .\n    \\end{align}\n```\n\nFor the rest state to be stable, we require\n\n```{math}\n:label: eq:stabilityBox\n\nk_0^2 < 1 \\ , \\qquad1 - \\sum_k \\Delta_k^c > 0 \\ , \\qquad\n    1 - k_0^2 \\sum_k \\frac{(\\Delta_k^e)^2}{\\Delta_k^c} > 0 \\ .\n```\n\nThese conditions bound the admissible parameter space.\n\n+++\n(sec:opencircuit)=\n### Open-circuit reduction\n\nReading the fiber into a high-impedance amplifier imposes the open-circuit condition {math}`D = 0`, giving\n\n```{math}\n:label: eq:openCircuitE\n\nE = -\\Big( x + \\tfrac{g_e}{2}x^2 + \\sum_j \\Delta_j^e\\, \\xi_j \\Big) \\ ,\n```\n\nexactly the voltage measured in units {math}`V_0 = L E_0` for fiber length {math}`L`. This serves as the model’s output. Substituting this back into the model[^itjEOxhLeZ] yields\n\n```{math}\n:label: eq:closedSystem\n\n\\begin{align}\n        X &= (1 + k_0^2)\\, x + \\Big(g + \\tfrac{3}{2}g_e k_0^2\\Big) x^2\n             - \\sum_k \\big(\\Delta_k^c - k_0^2 \\Delta_k^e\\big)\\, \\xi_k\n             + \\sum_k \\big(2 \\Delta_k^c \\ell_k + g_e k_0^2 \\Delta_k^e \\big)\\, x\\, \\xi_k \\ ,\\\\\n        \\tilde{\\tau}_k \\dot{\\xi}_k &= \\Big(1 - k_0^2 \\tfrac{\\Delta_k^e}{\\Delta_k^c}\\Big) x\n             - \\Big(\\ell_k + \\tfrac{g_e k_0^2}{2}\\tfrac{\\Delta_k^e}{\\Delta_k^c}\\Big) x^2\n             - \\xi_k - k_0^2 \\tfrac{\\Delta_k^e}{\\Delta_k^c} \\sum_j \\Delta_j^e\\, \\xi_j \\ .\n    \\end{align}\n```\n\nNote first that the linear stiffness is {math}`1 + k_0^2`, recovering exactly the standard open-circuit piezoelectric stiffening of the modulus.{cite:t}`damjanovicFerroelectricDielectricPiezoelectric1998` Second, the internal modes are now effectively coupled, since each mode’s charge contributes to the shared field, which in turn drives all modes.\n\nThe strain appears now only as an auxiliary quantity, fixed at each instant by the balance between the applied stress and the stress sustained by the material. That balance is set by Eq. [(%s)](#eq:closedSystem), a quadratic in {math}`x`. The physical root is the one that reduces to the linear solution {math}`x = s / A_{\\rm eff}` (for total linear drive {math}`s` and state-dependent stiffness {math}`A_{\\rm eff}`, defined in Eq. [(%s)](#eq:driveDefs)) when the quadratic stiffness vanishes:\n\n```{math}\n:label: eq:strainRoot\n\nh(u, \\x) = \\frac{2s}{A_{\\mathrm{eff}} + \\sqrt{A_{\\mathrm{eff}}^2 + 4 B s}} \\ ,\n```\n\n```{math}\n:label: eq:driveDefs\n\ns = u + \\mathbf{w} \\cdot \\x \\ , \\qquad\n    A_{\\mathrm{eff}} = A + \\mathbf{f} \\cdot \\x \\ .\n```\n\nHere we have passed to the notation of the I/O map [(%s)](#eq:IOmap): the input is the applied stress, {math}`u(t) = X(t)`, the internal state is the mode vector, {math}`\\x(t) = (\\xi_1, \\dots, \\xi_N)^{\\mathsf{T}}`, the output is the field, {math}`y(t) = E(t)`, and {math}`h(u, \\x)` is the strain the fiber adopts under stress {math}`u` with its internal state at {math}`\\x`. With every constant coefficient reduced to a single symbol (Table [%s](#tab:controlCoefs)), the model is\n\n```{math}\n:label: eq:controlForm\n\n\\begin{align}\n        \\mathbb{T}\\, \\dot{\\x} &= \\mathbf{p}\\,h(u,\\x) - \\mathbf{q}\\, h(u,\\x)^2 - \\x\n            - \\mathbf{r} (\\bm{\\eta}\\cdot \\x)  \\\\\n        y &= -\\big(h + G h^2 + \\bm{\\eta}\\cdot \\x \\big)\n    \\end{align}\n```\n\nThe square root in Eq. [(%s)](#eq:strainRoot) delimits the model’s domain: if the drive is strong enough that {math}`A_{\\mathrm{eff}}^2 + 4Bs < 0`, the weakly nonlinear description has been pushed past its regime of validity. In simulations this condition is monitored and treated as a bound on the admissible drive amplitude.\n\n:::{list-table} Coefficients of the reduced model, Eqs. [(%s)](#eq:strainRoot)–[(%s)](#eq:controlForm), in terms of the dimensionless variables.\n:header-rows: 0\n:name: tab:controlCoefs\n:align: center\n\n*   *   **Symbol**\n\n    *   **Definition**\n\n    *   **Meaning**\n\n*   *   {math}`A`\n\n    *   {math}`1 + k_0^2`\n\n    *   open-circuit (stiffened) modulus\n\n*   *   {math}`B`\n\n    *   {math}`g + \\tfrac{3}{2} g_e k_0^2`\n\n    *   total instantaneous quadratic stiffness\n\n*   *   {math}`G`\n\n    *   {math}`g_e / 2`\n\n    *   square-law charge coefficient in the readout\n\n*   *   {math}`w_k`\n\n    *   {math}`\\Delta_k^c - k_0^2 \\Delta_k^e`\n\n    *   open-circuit relaxation strength of mode  {math}`k`\n\n*   *   {math}`\\eta_k`\n\n    *   {math}`\\Delta_k^e`\n\n    *   charge carried per unit displacement of mode  {math}`k`\n\n*   *   {math}`f_k`\n\n    *   {math}`2\\Delta_k^c \\ell_k + g_e k_0^2 \\Delta_k^e`\n\n    *   strain–state cross stiffness\n\n*   *   {math}`r_k`\n\n    *   {math}`k_0^2 \\Delta_k^e / \\Delta_k^c`\n\n    *   field-mediated feedback of mode {math}`k`\n\n*   *   {math}`p_k`\n\n    *   {math}`1 - r_k = w_k / \\Delta_k^c`\n\n    *   linear drive of mode {math}`k`\n\n*   *   {math}`q_k`\n\n    *   {math}`\\ell_k + G\\, r_k`\n\n    *   quadratic drive of mode {math}`k`\n\n*   *   {math}`\\mathbb{T}`\n\n    *   {math}`\\mathrm{diag}(\\tilde{\\tau}_1, \\dots, \\tilde{\\tau}_N)`\n\n    *   relaxation timescale matrix\n:::\n\n(app:survey)=\n## Appendix B: Survey of transduction mechanisms\n\nThis appendix expands §[%s](#sec:survey), characterizing each mechanism by its material coupling coefficients and their microscopic origins. The survey is not comprehensive, the relative space given to different mechanisms is best regarded as a reflection of time and attention constraints, rather than as a reflection of their relative promise.\n\n+++\n(sec:dielectric)=\n### Dielectric couplings\n\nElectromechanical couplings, and in particular those found in dielectrics, are well-supported at both the level of bulk systems{cite:t}`ahnRelevanceCollagenPiezoelectricity2009,yucelStructuralOriginsSilk2011,bazaidElectromechanicalCouplingCollagen2023` and individual fibers.{cite:t}`kholkinStrongPiezoelectricityBioinspired2010,denningPiezoelectricTensorCollagen2017` A *dielectric* material is characterized by low conductivity and the induction of a polarization {math}`P_i` in the presence of an external electric field {math}`E_i`.\n\nIt may be instructive to see how a family of couplings can be unified within a single thermodynamic scaffold. Let {math}`G = G(T, X, E)` be the Gibbs free energy of an elastic dielectric for temperature {math}`T`, stress {math}`X`, and applied electric field {math}`E`. The extensive conjugates to {math}`T,X` and {math}`E` are the entropy {math}`S`, strain field {math}`x_{ij}`, and electric displacement vector {math}`D_i`, and their total differentials reveal a collection of couplings{cite:t}`damjanovicFerroelectricDielectricPiezoelectric1998`:\n\n```{math}\n:label: eq:GibbsElectric\n\n\\begin{align}\n        \\md S &= \\underbrace{\\pdfrac{S}{T}{X,E}\\md T}_{\\text{heat capacity}} + \\underbrace{\\pdfrac{S}{X_{ij}}{T,E}\\md X_{ij}}_{\\text{piezocaloric effect}} + \\underbrace{\\pdfrac{S}{E_i}{T,X}\\md E_i}_{\\text{electrocaloric effect}}  \\ , \\\\\n        \\md x_{ij} &= \\underbrace{\\pdfrac{x_{ij}}{T}{X,E}\\md T}_{\\text{thermal expansion}} + \\underbrace{\\pdfrac{x_{ij}}{X_{k\\ell}}{T,E}\\md X_{k\\ell}}_{\\text{elastic compliance}} + \\underbrace{\\pdfrac{x_{ij}}{E_i}{T,X}\\md E_i}_{\\text{converse piezoelectricity}} \\ , \\\\\n        \\md D_i &= \\underbrace{\\pdfrac{D_i}{T}{X,E}\\md T}_{\\text{pyroelectric effect}} + \\underbrace{\\pdfrac{D_i}{X_{jk}}{T,E}\\md X_{jk}}_{\\text{direct piezoelectricity}} + \\underbrace{\\pdfrac{D_i}{E_i}{T,X}\\md E_i}_{\\text{dielectric permittivity}} \\ .\n    \\end{align}\n```\n\nThe piezoelectric and pyroelectric phenomena emerge cleanly as off-diagonal terms of Eqs. [(%s)](#eq:GibbsElectric) and [(%s)](#eq:GibbsElectric). I discuss these in more detail below, and then introduce flexoelectricity, the generation of electric polarization by a strain gradient, and ferroelectricity, characterized by a bistability in the polarization vector.\n\n(app:piezo)=\n#### Piezoelectricity\n\n*Piezoelectricity* is the direct conversion between mechanical strain and polarization [^XmZTTjIGBO], and occurs in all non-centrosymmetric dielectrics. Synthetic piezoelectrics are ubiquitous, from electronics to biomedicine, but are often rigid or toxic, limiting their use in some applications. Piezoelectricity has significant experimental and theoretical support in proteins, and biocompatible piezoelectric devices are an active area of research.{cite:t}`ahnRelevanceCollagenPiezoelectricity2009,ghoshSustainableEnergyGeneration2017,guerinControlPiezoelectricityAmino2018,vivekananthanBiocompatibleCollagenNanofibrils2018,chorsiPiezoelectricBiomaterialsSensors2019,azimiElectrospinningPiezoelectricFibers2020,beraMolecularEngineeringPiezoelectricity2021,layIntrinsicPiezoelectricProperties2021,xiaVersatileTransientElectronics2025` The central engineering challenge is their relatively weak response and the poor scalability of current manufacturing.{cite:t}`zhangDesignManufacturingPiezoelectric2025`\n\nPiezoelectricity is usually characterized by the *piezoelectric coefficients*\n\n```{math}\nd_{ijk} = \\pfrac{\\partial D_i}{\\partial X_{jk}}_{T,E} = \\pfrac{\\partial x_{jk}}{\\partial E_i}_{T,X} \\ ,\n```\n\na third-rank tensor (see Eqs. [(%s)](#eq:GibbsElectric), [(%s)](#eq:GibbsElectric)) reported in {math}`\\mathrm{pm\\,V}^{-1}` or, equivalently, {math}`\\mathrm{pC\\,N}^{-1}`. In the linear regime (small fields/strain) these are treated as material constants, but the coupling is nonlinear in general (e.g. *electrostriction* is the second-order coupling {math}`x_{ij} = M_{ijk\\ell}E_kE_{\\ell}`{cite:t}`damjanovicFerroelectricDielectricPiezoelectric1998`).\n\nAtomistic simulation reveals how applied stress reorients and rescales the permanent dipoles of individual charged and polar residues, producing a net polarization along the fiber axis.{cite:t}`zhouMolecularMechanismPolarization2016` Because this polarization is axial, parallel fibrils add while antiparallel ones cancel. Piezoelectricity in bulk tendon therefore reads roughly an order of magnitude below a single fibril, whose contribution is diluted in tissue by oppositely oriented neighbors.{cite:t}`denningPiezoelectricTensorCollagen2017` This is the basis of the alignment result stated in §[%s](#sec:survey). Crosslinking-driven self-assembly to enhance piezoresponse has been reported in the literature.{cite:t}`nairSelfassemblyCollagenBundles2019`\n\nReported magnitudes span a wide range: e.g. collagen fibrils and films at {math}`d_{14}\\sim 0.1\\text{--}12\\ \\pmv`,{cite:t}`zhangDesignManufacturingPiezoelectric2025` self-assembled diphenylalanine peptide nanotubes reaching {math}`d_{15}\\sim 35\\text{--}60\\ \\pmv` with a linear and fully reversible response up to {math}`16\\text{ V}`,{cite:t}`kholkinStrongPiezoelectricityBioinspired2010` against inorganic PZT’s {math}`d_{33}\\sim200\\text{--}600\\ \\pmv`.{cite:t}`sherritCharacterizationPiezoelectricMaterials2007` Note, however, that these numbers as stated are not easily comparable, differing in tensor component ({math}`d_{14}`, {math}`d_{15}`, {math}`d_{33}`, … in Voigt notation), measurement protocol, and length scale.{cite:t}`layIntrinsicPiezoelectricProperties2021`\n\nThe tensor component matters greatly, with shear coefficients typically dominant over the axial coefficient {math}`d_{33}` in chiral polymers, including in collagen and self-assembled diphenylalanine peptide nanotubes.{cite:t}`fukadaPiezoelectricPropertiesOrganic1974,raviMolecularOriginPiezo2012,vasilevPiezoelectricPropertiesDiphenylalanine2016` A fiber loaded in pure tension is therefore driven through its weakest coefficient. The stronger shear response could be reached by converting axial drive into torsion, or by electrodes arranged to collect shear-generated polarization, and it offers a further advantage in being less sensitive to the disorder that cancels the axial response. The challenge is in designing an architecture that realizes this at device scale.\n\n(app:pyro)=\n#### Pyroelectricity\n\n*Pyroelectricity* is the change in the spontaneous polarization {math}`P_S` in polar materials in response to a change in temperature. Theory often takes the pyroelectric coefficient as the fixed-field temperature dependence of {math}`P_S`: {math}`p_i = (\\partial P_{S,i} / \\partial T)_{E}`, but the relevant quantity is more often the generalized coefficient {math}`p'_i = E_j(\\partial \\varepsilon_{ij} / \\partial T) + p_i` (via {math}`D_i = \\varepsilon_0 E_i + P_i + P_{S,i} = \\varepsilon_{ij}E_j + P_{S,i}`) which captures pyroelectric-like responses that arise even in non-polar dielectrics under an electric bias. The coefficient {math}`p^X_i = (\\partial D_i/\\partial T)_{X,E}` of Eq. [(%s)](#eq:GibbsElectric) is the ‘free’ coefficient, since fixed stress {math}`X` lets the material expand thermally.\n\nStrong piezoelectricity enhances pyroelectricity.{cite:t}`damjanovicFerroelectricDielectricPiezoelectric1998,yang_flexible_2013,fadzallah_electrospun_2025` The ‘clamped’ coefficient {math}`p^x_i` at fixed strain is the primary response alone, while the ‘free’ coefficient {math}`p^X_i` at fixed stress includes charge from thermal expansion and piezoelectricity (the *secondary* contribution):[^LIfemzXPBD]\n\n```{math}\n:label: eq:pyroSecondary\n\np_i^X = p_i^x + d_{ijk}\\,c_{jk\\ell m}\\,\\alpha_{\\ell m}\n```\n\nwhere {math}`c_{jk\\ell m}=\\paren{\\partial X_{jk}/\\partial x_{\\ell m}}_{T,E}` is the elasticity tensor and {math}`\\alpha_{ij} = (\\partial x_{ij}/\\partial T)_{X,E}` is the thermal expansion tensor.\n\n(app:flexo)=\n#### Flexoelectricity\n\n*Flexoelectricity* is the generation of polarization by a strain gradient (direct effect), or of strain by a field gradient (converse effect).{cite:t}`nguyenNanoscaleFlexoelectricity2013` With material coordinates {math}`(q_1,q_2,q_3)`, piezoelectricity and flexoelectricity are the first two terms in the gradient expansion of the electric displacement:\n\n```{math}\nD_i = d_{ijk}X_{jk} + \\mu_{ijk\\ell}\\frac{\\partial x_{jk}}{\\partial q_{\\ell}} \\ , \\qquad \\mu_{ijk\\ell} = \\frac{\\partial D_i}{\\partial x_{jk,\\ell}}\n```\n\nwhere {math}`x_{jk,\\ell} = \\partial x_{jk} / \\partial q_{\\ell}`. The flexoelectric response is the fourth-rank polar tensor {math}`\\mu_{ijk\\ell}`, which is nonzero even in centrosymmetric materials where {math}`d_{ijk} = 0` identically. This makes it more general than piezoelectricity, if less well understood.\n\nIts chief limitation is scale. The extra spatial derivative carries an inverse length, so the effect scales as {math}`(\\text{feature size})^{-1}`: negligible in bulk but potentially competitive with piezoelectricity at the nanoscale,{cite:t}`nguyenNanoscaleFlexoelectricity2013` hence of particular interest for individual fibrils, though to my knowledge no flexoelectric coefficient has yet been reported in an individual protein fibril. It has been proposed as a key coupling in hearing, poising the cochlear hair bundle at a Hopf bifurcation so that faint sounds trigger large, self-sustaining oscillations.{cite:t}`dengCollusionFlexoelectricityHopf2019` The soft-matter theory of flexoelectricity remains immature, however.{cite:t}`mohammadkhahFlexoelectricityBiologicalMaterials2025`\n\n(ssec:ferro)=\n#### Ferroelectricity\n\nA *ferroelectric* is a pyroelectric whose spontaneous polarization has two or more orientations, interconvertible by an applied field. The phenomenon is native to proteins. Ferroelectric switching was first uncovered in porcine aortic wall by piezoresponse force microscopy,{cite:t}`liuBiologicalFerroelectricityUncovered2012` and subsequently localized to its elastin. Switching of a purified elastic fiber network under an applied field was shown both at the nanoscale and macroscopically.{cite:t}`liuFerroelectricSwitchingElastin2014` Collagen, run as a control in the same experiment, does not switch. Switching in aortic elastin is also suppressed by glucose,{cite:t}`liuGlucoseSuppressesBiological2013` a liability for an implanted device but perhaps an exploitable chemo-ferroelectric coupling.\n\nBeyond fibers, ferroelectric switching has been resolved in crystalline {math}`\\gamma`-glycine,{cite:t}`herediaNanoscaleFerroelectricityCrystalline2012` whose {math}`\\beta` polymorph carries the large shear piezoelectric response discussed in §[%s](#app:piezo).{cite:t}`guerinControlPiezoelectricityAmino2018` Bistability suits a ferroelectric to memory or logic rather than to pure transduction, and a retained, switchable state is a different computational resource from the fading memory Ch. [%s](#ch:RC) relies on. This document does not explore that possibility, though it may be of interest for future research.\n\n+++\n(ssec:tribo)=\n### Triboelectricity\n\n*Triboelectricity* is the transfer of charge between two materials brought into contact or slid against one another (everyday static electricity being its most familiar form). It is an electromechanical coupling, but qualitatively distinct from those above. It is interfacial, depending on a pair of surfaces and their contact history, so there is no material-level constitutive relation. The mechanism is itself unsettled (whether the transferred species are electrons, ions, or both is debated and differs between material pairs) so characterization is necessarily device-level and phenomenological.\n\nThere is a well-developed literature on exploiting triboelectricity in devices. This is particularly true for energy harvesting, with a large body of work on *triboelectric nanogenerators* (TENGs). Electrospun fiber mats are attractive substrates because their high surface-to-volume ratio maximizes the interfacial area over which charge transfers; see Ref.{cite:t}`rabbiRecentAdvancesElectrospun2026` for a recent review, including how coupled solution and process parameters set fiber morphology (and hence output).\n\n+++\n(app:transport)=\n### Electric and ionic transport\n\nThe *conductivity* of a material is\n\n```{math}\n\\sigma = q N \\mu\n```\n\nwhere {math}`q, N,` and {math}`\\mu` are respectively the majority carrier’s charge, number density, and mobility. The interesting physics lives in {math}`N` and {math}`\\mu` and their interdependence, set by the localization of conducting states, structural and energetic disorder, and the carrier’s coupling to its local environment.{cite:t}`amdurskyMacroscaleBiomolecularElectronics2019`\n\nThe majority charge carrier may be an electron, a proton, or a larger ion, with biological precedent for each. Neuronal and cardiac signaling involve {math}`\\ce{Na+}`, {math}`\\ce{K+}`, and {math}`\\ce{Cl-}` fluxes, and transmembrane proton ({math}`\\ce{H+}`) transport drives mitochondrial ATP synthesis.{cite:t}`amdurskyMacroscaleBiomolecularElectronics2019` Long-range electron conduction along protein nanowires has drawn considerable attention recently, in the nickel-cofactor wires of cable bacteria{cite:t}`boschkerEfficientLongrangeConduction2021` and the conductive micrometer-long polymers of the cytochrome OmcS in *Geobacter*.{cite:t}`regueraExtracellularElectronTransfer2005,wangStructureMicrobialNanowires2019`\n\nConduction theory is mature for crystalline inorganics, far less so for disordered biomolecular systems. Isolating the current-carrying physics is hard, with mechanisms and carriers routinely conflated. Measuring ion transport is much more difficult than measuring electron transport, partly because standard metal electrodes simply block protons or ions. Melanin is the cautionary tale: long modeled as an electronic (Anderson-hopping) semiconductor, it is now understood to conduct predominantly by protons.{cite:t}`amdurskyMacroscaleBiomolecularElectronics2019` Whether a conductor is proton- or electron-dominated can be tested by comparing conductivity in {math}`\\ce{H2O}` versus {math}`\\ce{D2O}` (a **kinetic isotope effect** experiment{cite:t}`reddyProtonConductiveMelaninLikeFibers2020`).\n\n(app:ionic)=\n#### Ionic and protonic conduction\n\nIonic conductors have matured over more than half a century, and the proton-conducting polymer Nafion is now used in commercially available fuel-cell membranes.{cite:t}`amdurskyMacroscaleBiomolecularElectronics2019` The two main mechanisms are purely diffusive transport ({math}`\\mu = D q / k_B T` for diffusion coefficient {math}`D` and thermal energy {math}`k_B T`) and the *Grotthuss mechanism*, the rapid relay of an ionic defect through a hydrogen-bonded network. The latter is typically much faster and depends on the ordering and polarization of the participating water molecules. A percolation-like transition between the two regimes with a power-law dependence of conductivity on hydration near the transition has been suggested, but not verified.\n\nProtonic conduction has been realized in designed protein fibers. A self-assembling tripeptide (Lys-Tyr-Tyr) forms melanin-like films conducting up to {math}`\\sigma \\sim 4\\ \\text{mS}\\,\\text{cm}^{-1}` at {math}`70\\%` relative humidity,{cite:t}`reddyProtonConductiveMelaninLikeFibers2020` and prion-inspired amyloid fibers built on an X–Tyr motif reach {math}`\\sim 9\\ \\text{mS}\\,\\text{cm}^{-1}` at 40{math}`\\,{}^\\circ`C, rising to {math}`19\\ \\text{mS}\\,\\text{cm}^{-1}` at 120{math}`\\,{}^\\circ`C.{cite:t}`navarroHarnessingPrioninspiredAmyloid` In metalloprotein nanowires, it has been reported that carboxylic-acid groups are the essential functional groups, increasing the number of proton-transfer pathways when hydrated.{cite:t}`leeProtonicConductivityMetalloprotein2023` This points to aspartate- and glutamate-rich sequences as a rational design lever.\n\nIn all cases ionic conductivity rises steeply with hydration (in collagen, by several orders of magnitude from dry to saturated) and is strongly temperature-activated. It is commonly raised by adding protonatable sites for Grotthuss-type hopping and hydrophilic moieties for water uptake. In chitosan films, greater chemical crosslinking reduced crystallinity and so increased the conducting amorphous fraction.{cite:t}`amdurskyMacroscaleBiomolecularElectronics2019`\n\n(app:electronic)=\n#### Electronic conduction\n\nWhere electrons carry the current, the operative mechanism in protein fibers is redox hopping between closely spaced cofactors or aromatic residues. Microbial “nanowires” are micrometer-long polymers of the cytochrome OmcS, whose closely stacked hemes provide a continuous path for electron flow.{cite:t}`wangStructureMicrobialNanowires2019` The periplasmic wires of cable bacteria carry electrons over comparable distances through a protein core built around a nickel cofactor.{cite:t}`boschkerEfficientLongrangeConduction2021` In engineered peptide- and protein-based structures, the high reported conductivities usually come from a conductive coating (PEDOT:PSS, polypyrrole, or polyaniline), with the protein serving as a mechanical and morphological scaffold.{cite:t}`amdurskyMacroscaleBiomolecularElectronics2019,zhuSilkFibroinBasedConductive`\n\n(app:piezoresist)=\n#### Piezoresistance\n\n*Piezoresistance* is the modulation of conductance by mechanical strain. It is grouped here as it modulates a transport coefficient rather than generating a polarization, so it needs an external read current. A material of resistivity {math}`\\rho`, length {math}`\\ell` along the transport axis, and orthogonal cross-section {math}`A` has resistance {math}`R = \\rho \\ell / A`. Deformation may alter any of the three parameters. As with the electronic conductors above, piezoresistance in protein-fiber systems is typically a property of an added conductive phase like carbon nanotubes, silver nanowires, or a conducting-polymer coating.{cite:t}`amdurskyMacroscaleBiomolecularElectronics2019,zhuSilkFibroinBasedConductive,homayounfarWearableSensorsMonitoring2020`\n\n+++\n(ssec:capacitive)=\n### Capacitive transduction\n\nA *capacitive* element transduces deformation into a change of capacitance. For a parallel-plate idealization {math}`C = \\varepsilon_0 \\varepsilon_r A / \\ell`, deformation changes the electrode area {math}`A`, the separation {math}`\\ell`, and (for a strained dielectric fiber) the permittivity {math}`\\varepsilon_r` itself. Capacitive sensing reports static deformation at the cost of an excitation signal and a sensitivity to stray capacitance.\n\nIonotronic designs, in which an electric double layer forms at an electrolyte–electrode interface, confine the field to a nanometre-scale region and so reach capacitances unattainable with conventional dielectrics, giving sizable low-voltage signals compatible with wet protein systems.{cite:t}`kohReservoirComputingDielectric2022,wangIonicPotentialRelaxation2024` Moreover, the sensitivity can be tuned geometrically. For example, cricket-inspired MEMS hair-flow sensors read the deflection of a high-aspect-ratio pillar through a differential capacitance.{cite:t}`krijnenCricketInspiredFlowSensor2007` See Refs.{cite:t}`taoHairFlowSensors2012,ramirez-gonzalezImpedanceDielectricSpectroscopy2023` for a survey of hair-sensor designs and for a critical comparison of the impedance and dielectric spectroscopy methods used to characterize these interfaces.\n\n+++\n(app:light)=\n### Light-coupled mechanisms\n\nLight may be the transduced output of a mechanical or electrical input, or the input driving a mechanical or electrical response. All four mechanisms below have been demonstrated in electrospun or self-assembled fibers.\n\n(app:mechlum)=\n#### Mechanoluminescence\n\n*Mechanoluminescence* converts mechanical energy directly into light, and piezoelectricity can enhance the response. The canonical emitter is manganese-doped zinc sulfide ({math}`\\ce{ZnS}:\\ce{Mn^{2+}}`), which has been integrated into electrospun PVDF-based nanofibers.{cite:t}`wangIntegrationZnSMn22024` There the emitted intensity varies linearly with applied pressure over the tested range and nonlinearly with membrane thickness. Efficient, sensitive mechanoluminescence remains an open engineering challenge.{cite:t}`wangPressureRateDependentMechanoluminescence2023,yaoInterfacialFusionEngineering2026`\n\n(app:ellum)=\n#### Electroluminescence\n\n*Electroluminescence* is light emission driven by an applied field. A representative realization is the “scalable hydrogel-clad, ionotronic, nickel-core electroluminescent” (SHINE) fiber,{cite:t}`fuSelfhealingActuatableElectroluminescent2024` in which {math}`\\ce{ZnS}` microparticles dispersed in a dielectric are sandwiched between a nickel core and a hydrogel cladding to form a capacitor. It sustains a luminance of {math}`\\sim\\!10^3\\ \\text{cd}\\,\\text{m}^{-2}` under a {math}`\\sim\\!6\\ \\text{V}\\,\\mu\\text{m}^{-1}` AC field.\n\n(app:photomech)=\n#### Photomechanical actuation\n\n*Photomechanical actuation* is deformation in response to illumination, typically through a photoisomerizing moiety. *Azobenzene* is the standard example, switching reversibly between *trans* and *cis* isomers under different wavelengths.[^r9Yr0IcU5O] The accompanying conformational change can drive bulk motion: azobenzene has been incorporated into protein fibers for light-induced, reversible modulation of stiffness,{cite:t}`sunAzobenzeneBasedPhotomechanicalBiomaterials2021,sunReversiblyPhotoModulatingMechanical2021` and electrospun azobenzene/cellulose fabrics bend toward a UV source.{cite:t}`ahmadi-nohadaniElectrospunAzoCelluloseFabric2022` The reported effects are slow and the strains modest, which confines the mechanism to applications tolerant of subtle motion, perhaps with geometric amplification.\n\n(app:photocond)=\n#### Photoconductivity\n\n*Photoconductive* transduction converts incident light into an electrical signal by generating free carriers in a semiconductor. In fiber form it has been realized by electrospinning or coating a semiconductor, such as a metal oxide or a halide perovskite, into a single fiber or mat. Individual electrospun {math}`\\ce{TiO2}` fibers reach {math}`90\\ \\text{A\\,W}^{-1}` responsivity in the UV,{cite:t}`molina-mendozaHighlyResponsiveUVphotodetectors2016` and PAN/{math}`\\ce{MAPbI3}` composite fibers extend the response into the visible range.{cite:t}`li_electrospun_2019`\n\n+++\n(app:othersmech)=\n### Others\n\nThe mechanisms above do not exhaust the map of Fig. [%s](#fig:transMech). Several additional couplings are interesting as input or output stages, and are noted briefly:\n\n*   *Thermoelectric* (steady temperature gradient {math}`\\to` voltage, the Seebeck effect). Fiber-compatible conducting polymers such as PEDOT:PSS may suggest a route to thermoelectric fibers,{cite:t}`kimPEDOTPSSbasedHighperformance2024` adding a fifth harvesting modality alongside piezo-, pyro-, tribo-, and photovoltaic.\n\n*   *Thermo-mechanical* (temperature or confinement {math}`\\to` shape change). Silk fibroin confined in a carbon-nanotube sponge acquires a shape-memory effect.{cite:t}`yangUltrastiffBioinspiredProtein2025`\n\n*   *Hygroelectric* (moisture gradient {math}`\\to` charge). Protein nanowires can generate sustained power from ambient humidity alone, with no mechanical input.{cite:t}`liuPowerGenerationAmbient2020` The hydration dependence that complicates ionic conduction here becomes a source of energy.\n\n*   *Chemo-mechanical / chemo-electrical couplings*, in which ligand binding or a change in solvent drives swelling, conformational change, or a shift in charge state. Aligned electrospun silk fibroin bundles infused with conducting polymers actuate electromechanically in biologically relevant electrolytes at low applied potential,{cite:t}`severtMimickingMuscleFiber2017` and organic electrochemical transistors transduce biomolecule binding into a current.{cite:t}`luBiomoleculeSensorsBased2025`\n\n*   *Structural phase transitions* (stress {math}`\\to` large-scale structural change). Predicted for collagen fibrils{cite:t}`leightonChiralPhasecoexistenceCompressed2021` and observed in first-order form,{cite:t}`peacockBucklingTorsionalInstabilities2020` these couple stress to structure with a gain that diverges near the transition. They receive no further consideration in this document, a notable gap that reflects limited time rather than limited promise.\n\n(app:caseStudy)=\n## Appendix C: Case study: Mathematical details\n\n+++\n(app:lsmodel)=\n### Loewenstein-Skalak model\n\nThis appendix analyzes the lumped Loewenstein–Skalak (LS) model of the Pacinian corpuscle introduced in §[%s](#ssec:PCmodel) \\[Fig. [%s](#fig:pcorp)(b)].{cite:t}`loewensteinMechanicalTransmissionPacinian1966`\n\nIndex the lamellae {math}`i = 1, \\dots, N` from innermost to outermost, and let {math}`x_i(t)` denote the displacement of lamella {math}`i` along the loading axis. Each lamella is an elastic membrane of stiffness {math}`k_{M,i}`, drawn in Fig. [%s](#fig:pcorp)(b) as a spring to the rigid frame. Between lamellae {math}`i` and {math}`i-1` sits a viscoelastic fluid layer mostly composed of water and collagen, modeled as a Kelvin–Voigt element with spring constant {math}`k_{S,i}` and viscosity {math}`\\eta_i`. The innermost layer couples lamella 1 to the core and is taken to be rigid ({math}`x_0 = 0`). The external force enters at the outermost lamella, {math}`F_i(t) = F_{\\rm ext}(t)\\,\\delta_{iN}`. Neglecting lamellar inertia and defining the complex inter-layer stiffness {math}`\\hat{Z}_i(\\omega) \\equiv k_{S,i} + i\\omega \\eta_i`, the force balance on lamella {math}`i` reads, in the frequency domain,\n\n```{math}\n:label: eq:fourierLamella\n\n\\hat{F}_{\\rm ext}(\\omega)\\, \\delta_{iN} = -\\sbrac{\\hat{Z}_{i+1} \\hat{x}_{i+1} - (k_{M,i} + \\hat{Z}_i + \\hat{Z}_{i+1}) \\hat{x}_i + \\hat{Z}_i \\hat{x}_{i-1}} \\ ,\n```\n\nwith boundary conditions {math}`\\hat{x}_0 = 0` and {math}`\\hat{Z}_{N+1} = 0`.\n\nThe force at the core is the stress transmitted through the innermost fluid layer, so the transfer function of the capsule is\n\n```{math}\n:label: eq:HdefLamella\n\nH(\\omega) \\equiv \\frac{\\hat{F}_{\\rm core}(\\omega)}{\\hat{F}_{\\rm ext}(\\omega)} = \\frac{\\hat{Z}_1(\\omega) \\, \\hat{x}_1(\\omega)}{\\hat{F}_{\\rm ext}(\\omega)} \\ .\n```\n\nThe equations of motion [(%s)](#eq:fourierLamella) form a tri-diagonal system\n\n```{math}\n:label: eq:matrixSolution\n\n\\hat{F}_{\\rm ext}(\\omega) \\,\\mathbf{e}_N = \\mathbb{A}(\\omega) \\,\\hat{\\mathbf{x}}(\\omega) \\ , \\quad \\hat{\\mathbf{x}}(\\omega) = \\begin{pmatrix}\n         \\hat{x}_1(\\omega) \\\\\n         \\hat{x}_2(\\omega) \\\\\n         \\vdots \\\\\n         \\hat{x}_N(\\omega)\n    \\end{pmatrix} \\ , \\quad \\mathbb{A}_{ij}(\\omega) = \\begin{cases}\n    k_{M,i} + \\hat{Z}_i + \\hat{Z}_{i+1} & j = i \\\\\n    -\\hat{Z}_{i+1} & j = i+1 \\\\\n    -\\hat{Z}_{i} & j = i-1 \\\\\n    0 & \\text{otherwise} \\\n    \\end{cases} \\ ,\n```\n\nwhere {math}`\\mathbf{e}_i` is the {math}`i`th Cartesian unit vector, so {math}`\\hat{x}_1(\\omega) = \\hat{F}_{\\rm ext}(\\omega)\\sbrac{\\mathbb{A}^{-1}}_{1,N}`. For a tri-diagonal matrix the corner element of the inverse collapses: the {math}`(N,1)` cofactor is a triangular minor whose diagonal holds the superdiagonal entries {math}`-\\hat{Z}_{i+1}`, whence {math}`\\sbrac{\\mathbb{A}^{-1}}_{1,N} = \\prod_{i=2}^{N}\\hat{Z}_i / \\det \\mathbb{A}` and\n\n```{math}\n:label: eq:Hadmittance\n\nH(\\omega) =  \\hat{Z}_1(\\omega)\\,\\sbrac{\\mathbb{A}(\\omega)^{-1}}_{1,N} = \\frac{\\prod_{i=1}^N (k_{S,i} + i \\omega \\eta_i)}{\\det \\mathbb{A}(\\omega)} \\ .\n```\n\nThis reads as the impedance {math}`\\hat{Z}_1(\\omega)` of the final fluid layer times the complex admittance {math}`[\\mathbb{A}(\\omega)^{-1}]_{1,N}` carrying mechanical signals from layer {math}`N` to layer 1.\n\nThe essential behaviour is already present for a single layer ({math}`N=1`), where\n\n```{math}\n:label: eq:HsingleLayer\n\nH(\\omega) = \\frac{\\hat{Z}}{k_M + \\hat{Z}} = \\frac{\\omega _z + i \\omega }{\\omega_p + i\\omega} \\ , \\quad \\begin{cases}\n        \\omega_z \\equiv k_S / \\eta \\\\\n        \\omega_p \\equiv (k_M + k_S) / \\eta\n    \\end{cases}  \\ .\n```\n\nFollowing Loewenstein & Skalak, take {math}`\\omega_z \\ll \\omega_p`, i.e., the inter-lamellar couplings are far more compliant than the membranes themselves. Three regimes follow at once:\n\n*   {math}`\\omega \\ll \\omega_z \\ll \\omega_p \\implies |H(\\omega)| \\approx k_S / k_M \\ll 1`: static forces produce almost no force on the core.\n\n*   {math}`\\omega_z \\ll \\omega \\ll \\omega_p \\implies |H(\\omega)| \\approx (\\eta / k_M)\\,\\omega`: signal strength grows linearly in {math}`\\omega`.\n\n*   {math}`\\omega \\gg \\omega_p \\implies |H(\\omega)| \\approx 1`: near-perfect transmission of high frequencies.[^F4zRdIriHi]\n\nThe zero at {math}`\\omega_z` and pole at {math}`\\omega_p` bracket a differentiating band in which the capsule reports the rate of loading, and the exact DC transmission is {math}`H(0) = \\omega_z / \\omega_p = k_S / (k_M + k_S)`.\n\nFor the full model {math}`\\hat{Z}_i \\to k_{S,i}` as {math}`\\omega \\to 0`, i.e. each coupling acts as a spring under static loads. For {math}`N` identical layers ({math}`k_{M,i} = k_M`, {math}`k_{S,i} = k_S`), Eq. [(%s)](#eq:Hadmittance) gives {math}`H(0) = k_S^N / D_N(0)`, where {math}`D_i(\\omega)` is the {math}`i`th continuant of the tri-diagonal coupling matrix {math}`\\mathbb{A}`:\n\n```{math}\n:label: eq:continuant\n\nD_i = \\paren{k_{M,i} + \\hat{Z}_i + \\hat{Z}_{i+1}}\\,D_{i-1} - \\hat{Z}_i^2\\, D_{i-2} \\ , \\qquad D_0 = 1 \\ , \\quad D_{-1} = 0 \\ .\n```\n\nBy careful substitution, one finds that\n\n```{math}\n:label: eq:staticSuppression\n\nH(0) \\approx \\pfrac{k_S}{k_M + 2k_S}^{N-1} \\frac{k_S}{k_M + k_S} \\ \\sim\\ \\pfrac{k_S}{k_M}^{N} \\ .\n```\n\nStatic transmission falls off geometrically with depth, with each fluid layer passing only the fraction {math}`\\sim k_S /k_M` of its outer neighbour’s displacement inward.\n\nIn the limit {math}`\\omega \\to \\infty`, the dashpots rigidify and the stack translates as a rigid body, and the load is transmitted to the core in full ({math}`|H| \\to 1`). The radially graded parameters estimated by Loewenstein & Skalak from empirical data improve the static suppression even further.{cite:t}`loewensteinMechanicalTransmissionPacinian1966`\n\n+++\n(app:skinladder)=\n### The embedded capsule\n\nWhen the capsule is embedded in a skin (§[%s](#ssec:skinEmbed)), the primary input variable under the external drive is the displacement {math}`\\hat{s}(\\omega)` of the skin patch, and the system gains an extra node beyond the LS model. Model the skin patch as an inertial spring-damper system with impedance\n\n```{math}\n:label: eq:Zskin\n\n\\hat{Z}_{\\rm sk}(\\omega) \\equiv k_c + i\\omega\\eta_c - \\omega^2 m_c \\ ,\n```\n\ncoupled to the outermost lamella by the tissue element {math}`\\hat{Z}_t(\\omega) = k_t + i\\omega\\eta_t`. The force balance on the interior lamellae is unchanged from Eq. [(%s)](#eq:fourierLamella), but lamella {math}`N` now couples outward through {math}`\\hat{Z}_t`:\n\n```{math}\n\\hat{Z}_t\\,\\hat{s} - \\paren{k_{M,N} + \\hat{Z}_N + \\hat{Z}_t}\\hat{x}_N\n    + \\hat{Z}_N\\,\\hat{x}_{N-1} = 0 \\ .\n```\n\nIn the frequency domain, Newton’s law for the skin patch reads\n\n```{math}\n\\paren{\\hat{Z}_{\\rm sk} + \\hat{Z}_t}\\hat{s} - \\hat{Z}_t\\,\\hat{x}_N\n    = k_c\\,\\hat{u} \\ .\n```\n\nWrite {math}`\\hat{s} \\equiv \\hat{x}_{N+1}`, so {math}`k_c\\,\\hat{u}\\,\\mathbf{e}_{N+1} = \\mathbb{A}_{\\rm tot}\\,\\hat{\\mathbf{x}}`, with {math}`\\mathbb{A}_{\\rm tot}` identical to {math}`\\mathbb{A}` in rows {math}`1,\\dots,N-1` and\n\n```{math}\n:label: eq:Atot\n\n\\sbrac{\\mathbb{A}_{\\rm tot}}_{N,N} = k_{M,N} + \\hat{Z}_N + \\hat{Z}_t \\ ,\n    \\quad\n    \\sbrac{\\mathbb{A}_{\\rm tot}}_{N,N+1} = \\sbrac{\\mathbb{A}_{\\rm tot}}_{N+1,N}\n    = -\\hat{Z}_t \\ , \\quad\n    \\sbrac{\\mathbb{A}_{\\rm tot}}_{N+1,N+1} = \\hat{Z}_{\\rm sk} + \\hat{Z}_t \\ .\n```\n\nThe total transfer function is now\n\n```{math}\n:label: eq:HtotSkin\n\nH_{\\rm tot}(\\omega) \\equiv \\frac{\\hat{F}_{\\rm core}(\\omega)}{\\hat{u}(\\omega)}\n    = k_c\\,\\hat{Z}_1\\sbrac{\\mathbb{A}_{\\rm tot}^{-1}}_{1,N+1} \\ ,\n```\n\nstill read intuitively: the transfer of the external drive to the internal force is given by the skin’s elastic coupling {math}`k_c` times the complex admittance from the capsule’s core to the skin {math}`\\sbrac{\\mathbb{A}_{\\rm tot}^{-1}}_{1,N+1}` times the impedance of the innermost layer of the capsule {math}`\\hat{Z}_1`. This can be decomposed further in a physically meaningful way.\n\n:::{figure} https://thestacks-01.s3.amazonaws.com/publications/01M75CABVGH3G9RJZ60XNHCRJF/media_3d8d1ec2f1fb63aef2080a81b49395275dfbbdc983a5cfc53ddaf54d468a78e9.svg\n:name: fig:transferFunct\n:align: center\n\nTransfer functions of a capsule with {math}`N = 20` layers, uniform stiffness contrast {math}`k_M / k_S = 3`, and relaxation frequencies {math}`k_{S}/2\\pi\\eta_i` graded logarithmically over 2–60 Hz from exterior to interior. For the skin patch, {math}`k_c = 10^3` N/m, {math}`m_c = 0.4` g, and {math}`\\eta_c = 0.42` N s/m, coupled through a soft tissue element {math}`k_t = 20` N/m. Skin patch values were selected to be similar to the measured mechanical behavior of a fingertip.{cite:t}`wiertlewskiMechanicalBehaviorFingertip2012` **(a)** Magnitude of the bare-capsule response {math}`H(\\omega)` [(%s)](#eq:LStransfer) (blue, dashed) and the total embedded response {math}`H_{\\rm tot}(\\omega)` [(%s)](#eq:HtotFactored) (black, solid) in arbitrary units. **(b)** Unwrapped phase in units of {math}`\\pi`. The peak of {math}`\\approx 2.9\\pi` indicates roughly six layers of simultaneous differentiation, consistent with the slope {math}`|H_{\\rm tot}|\\propto \\omega^6` on the rising flank in (a).\n:::\n\nDefine the **input stiffness** {math}`\\hat{Z}_{\\rm in} \\equiv \\hat{F}_{\\rm ext}/\\hat{x}_N =\n1/\\sbrac{\\mathbb{A}^{-1}}_{N,N} = D_N / D_{N-1}`, the ratio of applied force to the displacement of the driven lamella. The skin patch sees the series combination of the tissue element and the capsule:\n\n```{math}\n:label: eq:Zeff\n\n\\hat{Z}_{\\rm eff} \\equiv\n    \\frac{\\hat{Z}_t\\,\\hat{Z}_{\\rm in}}{\\hat{Z}_t + \\hat{Z}_{\\rm in}} \\ .\n```\n\nExpanding {math}`\\det\\mathbb{A}_{\\rm tot}` along its final row in the continuants [(%s)](#eq:continuant) of the bare capsule yields\n\n```{math}\n\\det\\mathbb{A}_{\\rm tot} = D_{N-1}\\paren{\\hat{Z}_{\\rm in} + \\hat{Z}_t}\\paren{\\hat{Z}_{\\rm sk} + \\hat{Z}_{\\rm eff}} \\ ,\n```\n\nand so using {math}`\\prod_i \\hat{Z}_i = H\\,D_N = H\\,\\hat{Z}_{\\rm in} D_{N-1}` \\[Eq. [(%s)](#eq:Hadmittance)] the transfer function factorizes as\n\n```{math}\n:label: eq:HtotFactored\n\nH_{\\rm tot}(\\omega)\n    = \\frac{k_c}{\\hat{Z}_{\\rm sk} + \\hat{Z}_{\\rm eff}}\n    \\ \\times\\\n    \\hat{Z}_{\\rm eff}(\\omega)\n    \\ \\times\\\n    H(\\omega) \\ ,\n```\n\nwhere {math}`H(\\omega)` is the transfer function of the capsule. The factor {math}`\\hat{Z}_{\\rm eff}` accounts for the back-reaction of the capsule on the skin. When {math}`|\\hat{Z}_{\\rm eff}| \\ll |\\hat{Z}_{\\rm sk}|` (i.e. the receptor is far more compliant than the skin patch), the capsule reads the local skin motion without meaningfully deforming it.\n\nAt {math}`\\omega = 0`, the skin gain is {math}`k_c/(k_c + \\hat{Z}_{\\rm eff}(0)) \\approx 1`, so the static suppression remains geometric in depth [(%s)](#eq:staticSuppression), with one extra spring divider. For {math}`\\omega \\to \\infty`, the inertial term {math}`-\\omega^2 m_c` dominates and {math}`H_{\\rm tot} \\to 0`, curing the nonphysical flat tail of Eq. [(%s)](#eq:HsingleLayer). See Fig. [%s](#fig:transferFunct)(a).\n\n[^JDs5ftEFyk]: Pancomputationalism is essentially the view that *every* physical process is a computation. This renders the notion rather vacuous, especially if one is trying to actually *build* a physical computer.{cite:t}`copelandWhatComputation1996`\n\n[^xgqcKS8P90]: Here {math}`\\to` gives the domain and codomain (input and output spaces) of a map, and {math}`\\mapsto` gives its action on one element.\n\n[^kSbW0SEsBc]: The identification of {math}`R^+` with the input coupling will typically be far more subtle than stated here. For instance, the task of the computer might be to process a continuous stream of information at the inputs, with {math}`\\y(t)` reflecting both present and past signals. In that same situation, {math}`H` is not merely the autonomous evolution of {math}`\\x` from its initial instantiation but rather a functional of both the initial conditions and the input history.\n\n[^p9TF6ZBgdY]: The macrostates representing bits in a digital machine, for instance.\n\n[^HUQgHoGGFX]: For instance, the system is assumed to operate at equilibrium. The analysis in a driven system may be very different.\n\n[^s6HW9ihBfj]: Though it is in principle possible to either falsify the form or fix the coefficients with experimental measurements of a real visco-piezoelectric fibril. See, e.g., Ref.{cite:t}`ewoldtLowdimensionalIntrinsicMaterial2013`.\n\n[^MiGW0L5Cpw]: Bulk tendon reads roughly an order of magnitude below a single collagen fibril for this very reason.{cite:t}`denningPiezoelectricTensorCollagen2017`\n\n[^ka2VKnlrDR]: The derivation is brief: Since no free charge flows in open circuit, {math}`D_i = \\varepsilon_{ij} E_j + d_{ijk}X_{jk}=0`. Thus any induced polarization {math}`d_{ijk}X_{jk}` must be canceled by an internal field {math}`E_i = -(\\varepsilon^{-1})_{im}d_{mjk}X_{jk} = -g_{ijk}X_{jk}`.\n\n[^VjBQP5iBNL]: Permittivity measures how much of an applied field a material absorbs into the rearrangement of its own charges. In a high-permittivity material, internal rearrangements in response to a stress-induced field leave little for an electrode to measure. A low-permittivity material leaves that charge exposed, and the voltage is correspondingly larger.\n\n[^iPproduXJu]: In more detail: {math}`P\\propto \\mu \\nabla x` (§[%s](#app:flexo)), which I take to be proportional to the bound fraction {math}`\\theta` for simplicity. From the Hill equation {math}`\\theta(t) \\approx c(t)/(K_d + c(t))` with Hill coefficient 1, {math}`K_d \\gg c(t)` gives {math}`P(t) \\propto K_d^{-1} c(t)`.\n\n[^b1uIhVFEj5]: Psychophysically, texture is a small handful of weakly related perceptual axes (shine/matte, coarse/fine, rough/smooth, sticky/smooth, and so forth).{cite:t}`hollinsIndividualDifferencesPerceptual2000,klatzkyMultisensoryTexturePerception2010` Its definition is much more complicated than acknowledged here, as “there is little agreement as to what constitutes texture”, and “the definition will vary with the sensory system that transduces the surface”.{cite:t}`klatzkyMultisensoryTexturePerception2010`\n\n[^oOKDpowLIj]: Natural surfaces are often approximately self-affine within some finite band of wavenumbers {math}`q \\in [q_0, q_1]`, with the lower limit corresponding to a wavelength {math}`\\lambda_0 \\sim 10`–{math}`100\\,\\mu`m for many engineered surfaces{cite:t}`perssonAdhesionElasticBody2002`. The spectrum obeys a power law {math}`C_{1 \\rm D}(q) \\sim q^{-1 - 2H}` in this regime, with *Hurst exponent* {math}`0.7 \\lesssim H \\lesssim 1`.{cite:t}`perssonAdhesionElasticBody2002,rodriguezHowDetermineSurface2024` At fixed large-scale amplitude, small {math}`H` places relatively more power in fine features.\n\n[^X3bYiToKSF]: These ranges are similar to those cited in human perception studies (e.g. Manfredi et al. present textures at 4–12 cm/s{cite:t}`manfrediNaturalScenesTactile2014`), but are deliberately wider, since a synthetic skin need not be confined to the kinematics of human touch.\n\n[^oHdRNiUYu3]: The LS model was developed in 1966, and though it remains an elegant demonstration of a plausible mechanical filtering mechanism, it has long been recognized as overly simplistic,{cite:t}`bellStructureFunctionPacinian1994` and recent research may overturn this picture of frequency selectivity entirely.{cite:t}`chikamotoVelocitySensitivityMechanotransduction2026` The case study’s engineering value does not depend on the biology being right, and indeed, it should by no means be regarded as a model of how texture perception actually works *in vivo*.\n\n[^YH7LOg7ZEu]: A restrictive and likely unrealistic assumption, to be sure.\n\n[^DRq2AS7Q59]: Intuitively, the recent past is weighted more heavily in the output than the distant past. Fading memory is defined more carefully in §[%s](#ssec:fadingMemory).\n\n[^EfpGGbC8qV]: These include Nakajima’s introductory perspective on physical reservoir computing,{cite:t}`nakajimaPhysicalReservoirComputing2020` and the edited volume of Nakajima and Fischer, *Reservoir Computing: Theory, Physical Implementations, and Applications*.{cite:t}`nakajimaReservoirComputingTheory2021` Another worthwhile resource is the hands-on Jupyter-notebook-based tutorial of Cucchi et al.{cite:t}`cucchiHandsonReservoirComputing2022`\n\n[^uCaVndussf]: Conventionally this is the hyperbolic tangent {math}`f_i(\\mathbf{z}) = \\tanh(z_i)`, whose saturation both supplies the nonlinearity and keeps the state bounded.\n\n[^MpH9848siP]: This model is not totally general, and many conventional features can be relaxed. For instance, the weights {math}`\\mathbf{W}` and {math}`\\mathbf{W}^{\\text{in}}` needn’t be random. A deterministic cyclic network with a single connection weight is competitive with a fully random ESN across standard benchmarks, with reservoir size rather than structural complexity carrying performance.{cite:t}`rodanMinimumComplexityEcho2011`\n\n[^jkJ0IuGZRF]: Stated in this way, the property seems to exclude stochastic dynamics, since a noisy state is not a function of the input history alone. The strict form is not needed. It suffices that trajectories under a common drive converge to within a noise floor, and that floor then bounds what the readout can recover (§[%s](#ssec:fadingMemory), §[%s](#ssec:measFM)).\n\n[^u866OIV6Ss]: This guards against ill-conditioning of the state Gram matrix {math}`\\mathbf{X}\\mathbf{X}^{\\mathsf{T}}` and against overfitting the readout to noise. Ordinary least squares is recovered for {math}`\\lambda = 0`.\n\n[^wbvgiEwV4Z]: See, e.g., the chapter by Dale et al. in Ref.{cite:t}`nakajimaReservoirComputingTheory2021`, adapting Konkoli et al.\n\n[^LAiWGNPiAG]: Boyd’s result is stated for inputs with finitely many temporal channels, {math}`\\u(t) \\in \\mathbb{R}^d`, so one should restrict to {math}`u(\\mathbf{r},t) = \\sum_{k=1}^{d} u_k(t)\\, b_k(\\mathbf{r})`, decomposable over a finite set of fixed spatial profiles. The profiles {math}`b_k(\\mathbf{r})` might correspond to instrument profiles of separate actuators, contacts, or electrodes.\n\n[^JTLA5oBL1U]: As noted above, FM is equivalent to Jaeger’s echo state property, and the same property is sometimes called common-signal-induced synchronization{cite:t}`inubushiReservoirComputingMemoryNonlinearity2017` or consistency,{cite:t}`molgedeySuppressingChaosNeural1992` mostly depending on the academic background of the authors.\n\n[^l2l3pAa5XA]: The echo state property can be generalized to an **echo index** that counts the number of coexisting driven responses in a system for a particular subset of inputs, and a reservoir must have an index of one over its operating regime.{cite:t}`ceniEchoIndexMultistability2020`\n\n[^wM4kBLnscX]: This was introduced by Jaeger before the general information capacity was defined.{cite:t}`jaegerEchoStateApproach2010`\n\n[^qFB4MBNCwm]: See, for example, the spontaneous conductance relaxation and paired-pulse response of self-organized nanowire networks {cite:t}`milanoMateriaReservoirComputing2022` or the conductance recovery of liquid albumen.{cite:t}`fortulanSustainableReservoirComputing2025`\n\n[^gIV5jXSP4n]: See, e.g. Eq. [(40)](#eq:nondimSystem): {math}`\\tilde{\\tau}_k\\dot{\\xi}_k = \\dots - \\xi_k` gives {math}`\\xi_k \\to 0` for {math}`\\omega\\tilde{\\tau}_k \\gg 1`.\n\n[^XcYsH26Z9g]: Note that neither source covers the case at hand directly. Coleman (1964){cite:t}`colemanThermodynamicsMaterialsMemory1964` treats deformable media with memory but no electromagnetism; Coleman & Dill (1971){cite:t}`colemanThermodynamicsElectromagneticFields1971` treat electromagnetic fields in materials with memory but confine themselves to stationary media to avoid the difficulties arising from the interaction between material motion and the field. The model here borrows the form of their arguments without establishing that the procedure remains valid for the coupled electromechanical case.\n\n[^itjEOxhLeZ]: The substitution also generates a term {math}`\\tfrac{1}{2}g_e^2 k_0^2\\, x^3`, a product of two first-order-small nonlinearities. It lies beyond the truncation order of {math}`\\hat{\\zeta}` and is dropped for consistency.\n\n[^XmZTTjIGBO]: By convention, applied stress {math}`\\to` induced charge density is *direct piezoelectricity* and applied field {math}`\\to` induced strain is *converse piezoelectricity*. Here, I do not disambiguate, and refer to both directions as “piezoelectricity”.\n\n[^LIfemzXPBD]: The permittivity carries the same boundary-condition ambiguity. {math}`\\varepsilon^x_{ij} = (\\partial D_i / \\partial E_j)_x` and {math}`\\varepsilon^X_{ij} = (\\partial D_i / \\partial E_j)_X` differ by as much as 50-{math}`80\\%`,{cite:t}`damjanovicFerroelectricDielectricPiezoelectric1998` and the right choice depends on the device’s operating regime.\n\n[^r9Yr0IcU5O]: The *cis* isomer also relaxes thermally, though relatively slowly.\n\n[^F4zRdIriHi]: Since {math}`\\lim_{\\omega \\to \\infty}|H(\\omega)| \\neq 0`, this transfer function is nonphysical,{cite:t}`bechhoeferControlTheoryPhysicists2021` so it is best read as a simplified approximation of the true transfer function over a finite band.","contributors":[{"user_id":5758,"role":"Conceptualization","first_name":"Jordan","last_name":"Sawchuk","avatar":"avatars/users/user_5758_1794235756516.jpg","in_byline":1,"priority":1,"affiliations":[{"org_id":17,"name":"Simon Fraser University","slug":"sfu-ca","ror_id":"0213rcc28","avatar":null}]},{"user_id":5758,"role":"Editing","first_name":"Jordan","last_name":"Sawchuk","avatar":"avatars/users/user_5758_1794235756516.jpg","in_byline":1,"priority":1,"affiliations":[{"org_id":17,"name":"Simon Fraser University","slug":"sfu-ca","ror_id":"0213rcc28","avatar":null}]},{"user_id":5758,"role":"Formal analysis","first_name":"Jordan","last_name":"Sawchuk","avatar":"avatars/users/user_5758_1794235756516.jpg","in_byline":1,"priority":1,"affiliations":[{"org_id":17,"name":"Simon Fraser University","slug":"sfu-ca","ror_id":"0213rcc28","avatar":null}]},{"user_id":5758,"role":"Writing","first_name":"Jordan","last_name":"Sawchuk","avatar":"avatars/users/user_5758_1794235756516.jpg","in_byline":1,"priority":1,"affiliations":[{"org_id":17,"name":"Simon Fraser University","slug":"sfu-ca","ror_id":"0213rcc28","avatar":null}]},{"user_id":5405,"role":"Critical feedback","first_name":"Timothy","last_name":"McGee","avatar":"avatars/users/user_5405_1794950290294.jpg","in_byline":0,"priority":2,"affiliations":[{"org_id":16,"name":"Impossible Fibers, Inc","slug":"impossible-fibers","ror_id":null,"avatar":null}]},{"user_id":5405,"role":"Supervision","first_name":"Timothy","last_name":"McGee","avatar":"avatars/users/user_5405_1794950290294.jpg","in_byline":0,"priority":2,"affiliations":[{"org_id":16,"name":"Impossible Fibers, Inc","slug":"impossible-fibers","ror_id":null,"avatar":null}]}],"created_at":"2026-11-18T12:47:31.732Z","doi":"10.82153/dnak-dz90","version_doi":"10.82153/dnak-dz90.1","feedback_form_embed_src":null,"id":203,"license":"CC BY","content":{"format":"myst"},"linked_assets":[],"mediaAssets":[{"id":"01M75CACHK467C6CDTZTX4NY0P","byteSize":24905,"mimeType":"image/svg+xml","kind":"image","publicUrl":"https://thestacks-01.s3.amazonaws.com/publications/01M75CABVGH3G9RJZ60XNHCRJF/media_d0dd0251db6bbd86658bccbc28bc0e3b0f1af56ef4181dd9327a7f126a1e76d1.svg","width":234,"height":102,"durationMs":null,"rotation":null},{"id":"01M75CAD8V8Z8N3YA9R1697ST3","byteSize":152044,"mimeType":"image/svg+xml","kind":"image","publicUrl":"https://thestacks-01.s3.amazonaws.com/publications/01M75CABVGH3G9RJZ60XNHCRJF/media_ba290eaba8f61d528b941542a9f3cd8d6b5ca4ed8c4e17dcf773fbe3a3be5937.svg","width":465,"height":158,"durationMs":null,"rotation":null},{"id":"01M75CADE5FPTX5908RCZA9KMN","byteSize":258024,"mimeType":"image/svg+xml","kind":"image","publicUrl":"https://thestacks-01.s3.amazonaws.com/publications/01M75CABVGH3G9RJZ60XNHCRJF/media_38c0668694dccb8e7f8db1731c50c8f346db499704d3d56ba8b26b84bbed02fc.svg","width":1530,"height":905,"durationMs":null,"rotation":null},{"id":"01M75CADEZ59GYRT5TB8ZQJDN4","byteSize":351590,"mimeType":"image/svg+xml","kind":"image","publicUrl":"https://thestacks-01.s3.amazonaws.com/publications/01M75CABVGH3G9RJZ60XNHCRJF/media_8e86b1b0509ea7ab9fd66c2b8ea15cff198d7bfe272d457a4e5d8e05039b2480.svg","width":484,"height":239,"durationMs":null,"rotation":null},{"id":"01M75CADKGZ1ZSWPJ8C7G5Y933","byteSize":194678,"mimeType":"image/svg+xml","kind":"image","publicUrl":"https://thestacks-01.s3.amazonaws.com/publications/01M75CABVGH3G9RJZ60XNHCRJF/media_06149145af3b69905a71e9ee40bab9746edb5d7f644d71495f4c95c1c898e240.svg","width":648,"height":274,"durationMs":null,"rotation":null},{"id":"01M75CADPHJ571T10B3WN84PF2","byteSize":93249,"mimeType":"image/svg+xml","kind":"image","publicUrl":"https://thestacks-01.s3.amazonaws.com/publications/01M75CABVGH3G9RJZ60XNHCRJF/media_3d8d1ec2f1fb63aef2080a81b49395275dfbbdc983a5cfc53ddaf54d468a78e9.svg","width":490,"height":202,"durationMs":null,"rotation":null},{"id":"01M75CADPSSACQ9T4N126Q3CJX","byteSize":159009,"mimeType":"image/svg+xml","kind":"image","publicUrl":"https://thestacks-01.s3.amazonaws.com/publications/01M75CABVGH3G9RJZ60XNHCRJF/media_7910d0eee440870c41a308ef88f39a890790a266f50f68b54e5506d561011650.svg","width":491,"height":140,"durationMs":null,"rotation":null}],"orgs":[],"pdf_url":null,"publication_ulid":"01M75CABVGH3G9RJZ60XNHCRJF","publisher":"The Stacks","references":[{"url":"https://doi.org/10.1098/rspa.2014.0182","text":"Horsman D, Stepney S, Wagner RC, Kendon V. (2014). When does a physical system compute?."},{"url":"https://doi.org/10.1007/s11047-020-09805-3","text":"Stepney S, Kendon V. (2020). The representational entity in physical computing."},{"url":"https://doi.org/10.1007/978-981-13-1687-6","text":"(2021). Reservoir Computing."},{"url":"https://doi.org/10.17226/26403","text":"Committee on Biological Physics/Physics of Living Systems: A Decadal Survey, Board on Physics and Astronomy, Board on Life Sciences, Division on Engineering and Physical Sciences, Division on Earth and Life Studies, National Academies of Sciences, Engineering, and Medicine. (2022). Physics of Life."},{"url":"https://doi.org/10.1007/bf02084158","text":"Bennett CH. (1982). The thermodynamics of computation—a review."},{"url":"https://doi.org/10.1007/978-1-4419-6466-3","text":"Fraden J. (2010). Handbook of Modern Sensors."},{"url":"https://doi.org/10.1088/0957-4484/23/21/215204","text":"Prati E, De Michielis M, Belli M, Cocco S, Fanciulli M, Kotekar-Patil D, Ruoff M, Kern DP, Wharam DA, Verduijn J, Tettamanzi GC, Rogge S, Roche B, Wacquez R, Jehl X, Vinet M, Sanquer M. (2012). Few electron limit of n-type metal oxide semiconductor single electron transistors."},{"url":"https://doi.org/10.1002/adma.202003511","text":"Reddy SMM, Raßlenberg E, Sloan‐Dennison S, Hesketh T, Silberbush O, Tuttle T, Smith E, Graham D, Faulds K, Ulijn RV, Ashkenasy N, Lampel A. (2020). Proton‐Conductive Melanin‐Like Fibers through Enzymatic Oxidation of a Self‐Assembling Peptide."},{"url":"https://doi.org/10.1109/access.2025.3615606","text":"Krishna R, Choudhary DK. (2025). Improved Signal Detection in Bistable Systems Through Stochastic Resonance Across Diverse Noise Environments."},{"url":"https://doi.org/10.1016/j.clinph.2003.09.014","text":"Moss F, Ward LM, Sannita WG. (2004). Stochastic resonance and sensory information processing: a tutorial and review of application."},{"url":"https://doi.org/10.1021/acssuschemeng.7b01617","text":"Ghosh SK, Mandal D. (2017). Sustainable Energy Generation from Piezoelectric Biomaterial for Noninvasive Physiological Signal Monitoring."},{"url":"https://doi.org/10.1039/c7tb01904a","text":"Severt SY, Maxwell SL, Bontrager JS, Leger JM, Murphy AR. (2017). Mimicking muscle fiber structure and function through electromechanical actuation of electrospun silk fiber bundles."},{"url":"https://doi.org/10.1038/s41467-024-53955-2","text":"Fu X, Wan G, Guo H, Kim H, Yang Z, Tan YJ, Ho JS, Tee BCK. (2024). Self-healing actuatable electroluminescent fibres."},{"url":"https://doi.org/10.1147/rd.53.0183","text":"Landauer R. (1961). Irreversibility and Heat Generation in the Computing Process."},{"url":"https://doi.org/10.1109/jproc.2003.818324","text":"Zhirnov V, Cavin R, Hutchby J, Bourianoff G. (2003). Limits to binary logic switch scaling-a gedanken model."},{"url":"https://doi.org/10.1088/1751-8121/ab0850","text":"Wolpert DH. (2019). The stochastic thermodynamics of computation."},{"url":"https://doi.org/10.1038/236","text":"Laughlin SB, de Ruyter van Steveninck RR, Anderson JC. (1998). The metabolic cost of neural information."},{"url":"https://doi.org/10.1103/physrevlett.131.068401","text":"Bryant SJ, Machta BB. (2023). Physical Constraints in Intracellular Signaling: The Cost of Sending a Bit."},{"url":"https://doi.org/10.48550/arxiv.2511.08838","text":"Baulin VA, Füchslin RM, Giacometti A, Hauser H, Werner M. (2025). Material-Based Intelligence: Self-organizing, Autonomous and Adaptive Cognition Embodied in Physical Substrates."},{"url":"https://doi.org/10.1021/acs.chemrev.2c00621","text":"Miserez A, Yu J, Mohammadi P. (2023). Protein-Based Biological Materials: Molecular Design and Artificial Production."},{"url":"https://doi.org/10.1039/c8nr01634h","text":"Guerin S, Syed TAM, Thompson D. (2018). Deconstructing collagen piezoelectricity using alanine-hydroxyproline-glycine building blocks."},{"url":"https://doi.org/10.1021/acsbiomaterials.6b00021","text":"Zhou Z, Qian D, Minary-Jolandan M. (2016). Molecular Mechanism of Polarization and Piezoelectric Effect in Super-Twisted Collagen."},{"url":"https://doi.org/10.1039/d2tc05373j","text":"Lee W, Bazargan G, Gunlycke D, Lam NT, Travaglini L, Glover DJ, Mulvaney SP. (2023). Protonic conductivity in metalloprotein nanowires."},{"url":"https://doi.org/10.1039/d4na00303a","text":"Navarro S, Andrio A, Diaz-Caballero M, Ventura S, Compañ V. (2024). Harnessing prion-inspired amyloid self-assembly for sustainable and biocompatible proton conductivity."},{"url":"https://doi.org/10.1038/s41467-021-22895-6","text":"Bera S, Guerin S, Yuan H, O’Donnell J, Reynolds NP, Maraba O, Ji W, Shimon LJW, Cazade P, Tofail SAM, Thompson D, Yang R, Gazit E. (2021). Molecular engineering of piezoelectricity in collagen-mimicking peptide assemblies."},{"url":"https://doi.org/10.1126/sciadv.abc0810","text":"Ma C, Dong J, Viviani M, Tulini I, Pontillo N, Maity S, Zhou Y, Roos WH, Liu K, Herrmann A, Portale G. (2020). De novo rational design of a freestanding, supercharged polypeptide, proton-conducting membrane."},{"url":"https://doi.org/10.1038/nmat5045","text":"Guerin S, Stapleton A, Chovan D, Mouras R, Gleeson M, McKeown C, Noor MR, Silien C, Rhen FMF, Kholkin AL, Liu N, Soulimane T, Tofail SAM, Thompson D. (2017). Control of piezoelectricity in amino acids by supramolecular packing."},{"url":"https://doi.org/10.1021/acs.biomac.5b00552","text":"Fu J, Guerette PA, Miserez A. (2015). Self-Assembly of Recombinant Hagfish Thread Keratins Amenable to a Strain-Induced α-Helix to β-Sheet Transition."},{"url":"https://doi.org/10.1039/c9nr04750f","text":"Nair M, Calahorra Y, Kar-Narayan S, Best SM, Cameron RE. (2019). Self-assembly of collagen bundles and enhanced piezoelectricity induced by chemical crosslinking."},{"url":"https://doi.org/10.1126/science.adh2509","text":"Gao L, Hu B, Wang L, Cao J, He R, Zhang F, Wang Z, Xue W, Yang H, Li R. (2023). Intrinsically elastic polymer ferroelectric by precise slight cross-linking."},{"url":"https://doi.org/10.1021/acsbiomaterials.7b00183","text":"Denning D, Kilpatrick JI, Fukada E, Zhang N, Habelitz S, Fertala A, Gilchrist MD, Zhang Y, Tofail SAM, Rodriguez BJ. (2017). Piezoelectric Tensor of Collagen Fibrils Determined at the Nanoscale."},{"url":"https://doi.org/10.1021/bm3011837","text":"Negishi A, Armstrong CL, Kreplak L, Rheinstadter MC, Lim L, Gillis TE, Fudge DS. (2012). The Production of Fibers and Films from Solubilized Hagfish Slime Thread Proteins."},{"url":"https://doi.org/10.1002/adma.201101733","text":"Farrar D, Ren K, Cheng D, Kim S, Moon W, Wilson WL, West JE, Yu SM. (2011). Permanent Polarity and Piezoelectricity of Electrospun α‐Helical Poly(α‐Amino Acid) Fibers."},{"url":"https://doi.org/10.1063/1.5139621","text":"Reiter G. (2020). The memorizing capacity of polymers."},{"url":"https://doi.org/10.3390/ma16176034","text":"Bazaid A, Zhang F, Zhang Q, Neumayer S, Denning D, Habelitz S, Marina Ferreira A, Rodriguez BJ. (2023). Electromechanical Coupling in Collagen Measured under Increasing Relative Humidity."},{"url":"https://doi.org/10.1021/cg500747x","text":"Isakov D, Petukhova D, Vasilev S, Nuraeva A, Khazamov T, Seyedhosseini E, Zelenovskiy P, Shur VY, Kholkin AL. (2014). In Situ Observation of the Humidity Controlled Polymorphic Phase Transformation in Glycine Microcrystals."},{"url":"https://doi.org/10.1002/adfm.202410358","text":"Wang Z, Tai Y, Ye Z, Nam J, Yin Y. (2024). Integration of ZnS: Mn2⁺ Microparticles into Electrospun PVDF‐Based Nanofibers for Enhanced Mechanoluminescence."},{"url":"https://doi.org/10.48550/arxiv.0711.2657","text":"Sherrit S, Mukherjee BK. (2007). Characterization of Piezoelectric Materials for Transducers."},{"url":"https://doi.org/10.1016/j.jpcs.2016.02.002","text":"Vasilev S, Zelenovskiy P, Vasileva D, Nuraeva A, Shur VY, Kholkin AL. (2016). Piezoelectric properties of diphenylalanine microtubes prepared from the solution."},{"url":"https://doi.org/10.1021/acs.chemrev.5c00399","text":"Zhang Z, Wang Z, Li X, Zheng Y, Yang Z. (2025). Design and Manufacturing of Piezoelectric Biomaterials for Bioelectronics and Biomedical Applications."},{"url":"https://doi.org/10.1002/admt.201900176","text":"Komolafe A, Torah R, Wei Y, Nunes‐Matos H, Li M, Hardy D, Dias T, Tudor M, Beeby S. (2019). Integrating Flexible Filament Circuits for E‐Textile Applications."},{"url":"https://doi.org/10.1016/j.nbt.2017.12.006","text":"Edlund AM, Jones J, Lewis R, Quinn JC. (2018). Economic feasibility and environmental impact of synthetic spider silk production from escherichia coli."},{"url":"https://doi.org/10.1002/adfm.202408386","text":"Breslauer DN. (2024). Current Progress on Scale‐Up and Commercialization of Microbially‐Produced Silk."},{"url":"https://doi.org/10.1038/nchem.2122","text":"Frederix PWJM, Scott GG, Abul-Haija YM, Kalafatovic D, Pappas CG, Javid N, Hunt NT, Ulijn RV, Tuttle T. (2014). Exploring the sequence space for (tri-)peptide self-assembly to design and discover new hydrogels."},{"url":"https://doi.org/10.1021/acs.chemrev.2c00465","text":"Rising A, Harrington MJ. (2022). Biological Materials Processing: Time-Tested Tricks for Sustainable Fiber Fabrication."},{"url":"https://doi.org/10.1021/acs.macromol.6b01523","text":"Grindy SC, Lenz M, Holten-Andersen N. (2016). Engineering Elasticity and Relaxation Time in Metal-Coordinate Cross-Linked Hydrogels."},{"url":"https://doi.org/10.1134/s0965545x06010068","text":"Malkin AY. (2006). The use of a continuous relaxation spectrum for describing the viscoelastic properties of polymers."},{"url":"https://doi.org/10.1002/bip.22133","text":"Motte S, Kaufman LJ. (2012). Strain stiffening in collagen I networks."},{"url":"https://doi.org/10.1038/s41598-018-21786-z","text":"Karunaratne A, Li S, Bull AMJ. (2018). Nano-scale mechanisms explain the stiffening and strengthening of ligament tissue with increasing strain rate."},{"url":"https://doi.org/10.1073/pnas.2424991122","text":"Kiyabu S, Nelson D, Thomson J, Schultz B, Vincent T, Hertlein N, Gillman A, Criner A, Buskohl PR. (2025). Optomechanical reservoir computing."},{"url":"https://doi.org/10.1111/j.1749-6632.1974.tb26776.x","text":"Fukada E. (1974). PIEZOELECTRIC PROPERTIES OF ORGANIC POLYMERS."},{"url":"https://doi.org/10.1002/adma.201802221","text":"Amdursky N, Głowacki ED, Meredith P. (2018). Macroscale Biomolecular Electronics and Ionics."},{"url":"https://doi.org/10.1021/jp208436j","text":"Ravi HK, Simona F, Hulliger J, Cascella M. (2012). Molecular Origin of Piezo- and Pyroelectric Properties in Collagen Investigated by Molecular Dynamics Simulations."},{"url":"https://doi.org/10.1039/d1ra03557f","text":"Lay R, Deijs GS, Malmström J. (2021). The intrinsic piezoelectric properties of materials – a review with a focus on biological materials."},{"url":"https://doi.org/10.1016/j.polymer.2023.126235","text":"Furukawa T, Kodama H, Ishii H, Kojima S, Nakajima T, Gan W, Velayutham T, Majid WA. (2023). Towards comprehensive understanding of piezoelectricity and its relaxation in VDF-based ferroelectric polymers."},{"url":"https://doi.org/10.1073/pnas.1710559114","text":"Zhou J, Miles RN. (2017). Sensing fluctuating airflow with spider silk."},{"url":"https://doi.org/10.3390/biomimetics4010025","text":"Tunn I, Harrington MJ, Blank KG. (2019). Bioinspired Histidine–Zn2+ Coordination for Tuning the Mechanical Properties of Self-Healing Coiled Coil Cross-Linked Hydrogels."},{"url":"https://doi.org/10.1088/0034-4885/61/9/002","text":"Damjanovic D. (1998). Ferroelectric, dielectric and piezoelectric properties of ferroelectric thin films and ceramics."},{"url":"https://doi.org/10.1021/nn305247x","text":"Yang Y, Zhang H, Zhu G, Lee S, Lin Z, Wang ZL. (2012). Flexible Hybrid Energy Cell for Simultaneously Harvesting Thermal, Mechanical, and Solar Energies."},{"url":"https://doi.org/10.1177/2472630319891128","text":"Homayounfar SZ, Andrew TL. (2020). Wearable Sensors for Monitoring Human Motion: A Review on Mechanisms, Materials, and Challenges."},{"url":"https://doi.org/10.1038/s41598-022-10152-9","text":"Koh S, Shima H, Naitoh Y, Akinaga H, Kinoshita K. (2022). Reservoir computing with dielectric relaxation at an electrode–ionic liquid interface."},{"url":"https://doi.org/10.1021/acsnano.4c09154","text":"Wang L, Wang S, Xu G, Qu Y, Zhang H, Liu W, Dai J, Wang T, Liu Z, Liu Q, Xiao K. (2024). Ionic Potential Relaxation Effect in a Hydrogel Enabling Synapse-Like Information Processing."},{"url":"https://doi.org/10.1038/s41567-025-03111-4","text":"Mattingly HH, Kamino K, Ong J, Kottou R, Emonet T, Machta BB. (2026). E. coli chemosensing accuracy is not limited by stochastic molecule arrivals."},{"url":"https://doi.org/10.1038/s41528-025-00383-x","text":"Lu Z, Xu K, Xiao K, Xu Q, Wang L, Li P, Zhou J, Zhao D, Bai L, Cheng Y, Huang W. (2025). Biomolecule sensors based on organic electrochemical transistors."},{"url":"https://doi.org/10.1007/978-1-4419-5615-6_12","text":"Klatzky RL, Lederman SJ. (2010). Multisensory Texture Perception."},{"url":"https://doi.org/10.1080/0899022031000083825","text":"BensmaÏa SJ, Hollins M. (2003). The vibrations of texture."},{"url":"https://doi.org/10.1007/s11249-024-01933-6","text":"Rodriguez N, Gontard L, Ma C, Xu R, Persson BNJ. (2024). On How to Determine Surface Roughness Power Spectra."},{"url":"https://doi.org/10.1016/j.jbiomech.2012.05.045","text":"Wiertlewski M, Hayward V. (2012). Mechanical behavior of the fingertip in the range of frequencies and displacements relevant to touch."},{"url":"https://doi.org/10.1152/jn.1968.31.2.301","text":"Talbot WH, Darian-Smith I, Kornhuber HH, Mountcastle VB. (1968). The sense of flutter-vibration: comparison of the human capacity with response patterns of mechanoreceptive afferents from the monkey hand."},{"url":"https://doi.org/10.1016/0301-0082(94)90022-1","text":"Bell J, Bolanowski S, Holmes MH. (1994). The structure and function of pacinian corpuscles: A review."},{"url":"https://doi.org/10.1113/jphysiol.1966.sp007827","text":"Loewenstein WR, Skalak R. (1966). Mechanical transmission in a Pacinian corpuscle. An analysis and a theory."},{"url":"https://doi.org/10.1073/pnas.1305509110","text":"Weber AI, Saal HP, Lieber JD, Cheng J, Manfredi LR, Dammann JF, Bensmaia SJ. (2013). Spatial and temporal codes mediate the tactile perception of natural textures."},{"url":"https://doi.org/10.1038/s41467-022-28873-w","text":"Long KH, Lieber JD, Bensmaia SJ. (2022). Texture is encoded in precise temporal spiking patterns in primate somatosensory cortex."},{"url":"https://doi.org/10.1140/epje/i2002-10025-1","text":"Persson B. (2002). Adhesion between an elastic body and a randomly rough hard surface."},{"url":"https://doi.org/10.1152/jn.00680.2013@apsselect.2014.1.issue-6","text":""},{"url":"https://doi.org/10.1152/jn.00583.2020","text":"Ryan CP, Bettelani GC, Ciotti S, Parise C, Moscatelli A, Bianchi M. (2021). The interaction between motion and texture in the sense of touch."},{"url":"https://doi.org/10.1016/j.neunet.2019.03.005","text":"Tanaka G, Yamane T, Héroux JB, Nakane R, Kanazawa N, Takeda S, Numata H, Nakano D, Hirose A. (2019). Recent advances in physical reservoir computing: A review."},{"url":"https://doi.org/10.35848/1347-4065/ab8d4f","text":"Nakajima K. (2020). Physical reservoir computing—an introductory perspective."},{"url":"https://doi.org/10.1038/s41928-024-01133-z","text":"Liang X, Tang J, Zhong Y, Gao B, Qian H, Wu H. (2024). Physical reservoir computing with emerging electronics."},{"url":"https://doi.org/10.1162/089976602760407955","text":"Maass W, Natschläger T, Markram H. (2002). Real-Time Computing Without Stable States: A New Framework for Neural Computation Based on Perturbations."},{"url":"https://doi.org/10.1007/978-3-540-39432-7_63","text":"Fernando C, Sojakka S. (2003). Pattern Recognition in a Bucket."},{"url":"https://doi.org/10.1126/sciadv.abh0693","text":"Cucchi M, Gruener C, Petrauskas L, Steiner P, Tseng H, Fischer A, Penkovsky B, Matthus C, Birkholz P, Kleemann H, Leo K. (2021). Reservoir computing with biocompatible organic electrochemical networks for brain-inspired biosignal classification."},{"url":"https://doi.org/10.1038/s41563-021-01099-9","text":"Milano G, Pedretti G, Montano K, Ricci S, Hashemkhani S, Boarino L, Ielmini D, Ricciardi C. (2021). In materia reservoir computing with a fully memristive architecture based on self-organizing nanowire networks."},{"url":"https://doi.org/10.1364/optica.2.000438","text":"Vinckier Q, Duport F, Smerieri A, Vandoorne K, Bienstman P, Haelterman M, Massar S. (2015). High-performance photonic reservoir computer based on a coherently driven passive cavity."},{"url":"https://doi.org/10.1098/rsif.2014.0437","text":"Nakajima K, Li T, Hauser H, Pfeifer R. (2014). Exploiting short-term memory in soft body dynamics as a computational resource."},{"url":"https://doi.org/10.1039/d4tc05233a","text":"Fortulan R, Raeisi Kheirabadi N, Browner D, Chiolerio A, Adamatzky A. (2025). Sustainable reservoir computing with liquid egg albumen."},{"url":"https://doi.org/10.1093/pnasnexus/pgaf335","text":"Fortulan R, Raeisi Kheirabadi N, Chiolerio A, Adamatzky A. (2025). A grapeful discovery: Reservoir computing with wine beads."},{"url":"https://doi.org/10.1016/j.neunet.2018.08.025","text":"Grigoryeva L, Ortega J. (2018). Echo state networks are universal."},{"url":"https://doi.org/10.1007/s00422-012-0471-0","text":"Hauser H, Ijspeert AJ, Füchslin RM, Pfeifer R, Maass W. (2011). Towards a theoretical foundation for morphological computation with compliant bodies."},{"url":"https://doi.org/10.48550/arxiv.1807.02621","text":"Gonon L, Ortega J. (2018). Reservoir Computing Universality With Stochastic Inputs."},{"url":"https://doi.org/10.1038/srep00514","text":"Dambre J, Verstraeten D, Schrauwen B, Massar S. (2012). Information Processing Capacity of Dynamical Systems."},{"url":"https://doi.org/10.1063/1.5038038","text":"Dion G, Mejaouri S, Sylvestre J. (2018). Reservoir computing with a single delay-coupled non-linear mechanical oscillator."},{"url":"https://doi.org/10.1038/s41467-021-25801-2","text":"Gauthier DJ, Bollt E, Griffith A, Barbosa WAS. (2021). Next generation reservoir computing."},{"url":"https://doi.org/10.2478/joeb-2018-0020","text":"Pettersen FJ. (2018). On sensitivity in transfer impedance measurements."},{"url":"https://doi.org/10.1103/physrevapplied.20.044057","text":"Love J, Msiska R, Mulkers J, Bourianoff G, Leliaert J, Everschor-Sitte K. (2023). Spatial analysis of physical reservoir computers."},{"url":"https://doi.org/10.48550/arxiv.2601.03536","text":"Khairnar A, Phalak Y, Wang J, Zhou Z, Jantzen B, Li S, Naughton N. (2026). Spider web-inspired sensing and computation with fiber network physical reservoirs."},{"url":"https://doi.org/10.1038/s42005-024-01530-y","text":"Al Beattie B, Feketa P, Ochs K, Kohlstedt H. (2024). Criticality in FitzHugh-Nagumo oscillator ensembles: Design, robustness, and spatial invariance."},{"url":"https://doi.org/10.1038/s41598-017-10257-6","text":"Inubushi M, Yoshimura K. (2017). Reservoir Computing Beyond Memory-Nonlinearity Trade-off."},{"url":"https://doi.org/10.1002/aisy.202500281","text":"Mohamed AS, Armendarez NX, Hasan MS, Najem JS. (2025). Memimpedance‐Based Biomolecular Device for Adaptive Physical Reservoir Computing."},{"url":"https://doi.org/10.1088/2634-4386/ac7db7","text":"Cucchi M, Abreu S, Ciccone G, Brunner D, Kleemann H. (2022). Hands-on reservoir computing: a tutorial for practical implementation."},{"url":"https://doi.org/10.1080/17445760.2025.2472211","text":"Wringe C, Trefzer M, Stepney S. (2025). Reservoir computing benchmarks: a tutorial review and critique."},{"url":"https://doi.org/10.1109/72.846741","text":"Atiya A, Parlos A. (2000). New results on recurrent network training: unifying the algorithms and accelerating convergence."},{"url":"https://doi.org/10.1088/2634-4386/ae441f","text":"Pilati D, Ceni A, Michieletti F, Gallicchio C, Ricciardi C, Milano G. (2026). RCbench: a unified framework for benchmarking reservoir computing systems."},{"url":"https://doi.org/10.48550/arxiv.2604.07423","text":"Phalak Y, Lor WS, Khairnar A, Jantzen B, Naughton N, Li S. (2026). OpenPRC: A Unified Open-Source Framework for Physics-to-Task Evaluation in Physical Reservoir Computing."},{"url":"https://doi.org/10.1016/j.bpj.2011.04.052","text":"Shen ZL, Kahn H, Ballarini R, Eppell SJ. (2011). Viscoelastic Properties of Isolated Collagen Fibrils."},{"url":"https://doi.org/10.1021/ma5013144","text":"Rossow T, Habicht A, Seiffert S. (2014). Relaxation and Dynamics in Transient Polymer Model Networks."},{"url":"https://doi.org/10.1177/1045389x261420480","text":"Kiyabu S, Toledo S, He S, Criner A, Musgrave P, Buskohl PR. (2026). Geometric nonlinearity for 2D mechanical reservoir computing."},{"url":"https://doi.org/10.1103/73wb-22pz","text":"Li Z, Xu M, Norte RA, Aragón AM, Steeneken PG, Alijani F. (2026). Cascade of Modal Interactions in Nanomechanical Resonators with Soft Clamping."},{"url":"https://doi.org/10.1038/s41467-017-01011-7","text":"Kim J, Feng J, Jones CAR, Mao X, Sander LM, Levine H, Sun B. (2017). Stress-induced plasticity of dynamic collagen networks."},{"url":"https://doi.org/10.1002/advs.202416413","text":"Ma Z, Yi H, Zheng Z, Chen Z, Liu W, Chen Y, Cheng B, Cai C, Pan S, Ge J. (2025). Versatile and Robust Reservoir Computing with PWM‐Driven Heterogenous R – C Circuits."},{"url":"https://doi.org/10.1002/adfm.201002077","text":"Yucel T, Cebe P, Kaplan DL. (2011). Structural Origins of Silk Piezoelectricity."},{"url":"https://doi.org/10.1371/journal.pone.0101792","text":"Chrol-Cannon J, Jin Y. (2014). On the Correlation between Reservoir Metrics and Performance for Time Series Classification under the Influence of Synaptic Plasticity."},{"url":"https://doi.org/10.1038/s41467-024-45187-1","text":"Yan M, Huang C, Bienstman P, Tino P, Lin W, Sun J. (2024). Emerging opportunities and challenges for the future of reservoir computing."},{"url":"https://doi.org/10.3389/frobt.2026.1751222","text":"Howard D. (2026). Operationalising reproducibility in soft robotics."},{"url":"https://doi.org/10.3390/biomimetics8020189","text":"Prudnikov N, Malakhov S, Kulagin V, Emelyanov A, Chvalun S, Demin V, Erokhin V. (2023). Multi-Terminal Nonwoven Stochastic Memristive Devices Based on Polyamide-6 and Polyaniline for Neuromorphic Computing."},{"url":"https://doi.org/10.1002/smtd.202500682","text":"Kondo Y, Nakamura H, Seimiya N, Nitta A, Takei K. (2025). Softness‐ and Pressure‐Perceptive Electronic Skin with Reservoir‐Computed Central Nervous System."},{"url":"https://doi.org/10.1038/s41598-023-31994-x","text":"Yu Z, Sadati SMH, Perera S, Hauser H, Childs PRN, Nanayakkara T. (2023). Tapered whisker reservoir computing for real-time terrain identification-based navigation."},{"url":"https://doi.org/10.48550/arxiv.2507.21496","text":"Terajima R, Inoue K, Nakajima K, Kuniyoshi Y. (2025). Multifunctional physical reservoir computing in soft tensegrity robots."},{"url":"https://doi.org/10.1145/1236360.1236372","text":"Balzano L, Nowak R. (2007). Blind calibration of sensor networks."},{"url":"https://doi.org/10.48550/arxiv.2601.21807","text":"Nakamura Y, Kubota T, Imai Y, Tsunegi S, Notsu H, Nakajima K. (2026). Ensemble Reservoir Computing for Physical Systems."},{"url":"https://doi.org/10.1152/jn.01240.2005","text":"Sripati AP, Bensmaia SJ, Johnson KO. (2006). A Continuum Mechanical Model of Mechanoreceptive Afferent Responses to Indented Spatial Patterns."},{"url":"https://doi.org/10.1115/1.1613673","text":"Dandekar K, Raju BI, Srinivasan MA. (2003). 3-D Finite-Element Models of Human and Monkey Fingertips to Investigate the Mechanics of Tactile Sense."},{"url":"https://doi.org/10.1007/bf00283864","text":"Coleman BD. (1964). Thermodynamics of materials with memory."},{"url":"https://doi.org/10.1007/bf00281371","text":"Coleman BD, Dill EH. (1971). On the thermodynamics of electromagnetic fields in materials with memory."},{"url":"https://doi.org/10.1063/1.1711937","text":"Coleman BD, Gurtin ME. (1967). Thermodynamics with Internal State Variables."},{"url":"https://doi.org/10.1016/j.medengphy.2009.02.006","text":"Ahn AC, Grodzinsky AJ. (2009). Relevance of collagen piezoelectricity to “Wolff's Law”: A critical review."},{"url":"https://doi.org/10.1021/nn901327v","text":"Kholkin A, Amdursky N, Bdikin I, Gazit E, Rosenman G. (2010). Strong Piezoelectricity in Bioinspired Peptide Nanotubes."},{"url":"https://doi.org/10.1021/acsami.8b02915","text":"Vivekananthan V, Alluri NR, Purusothaman Y, Chandrasekhar A, Selvarajan S, Kim S. (2018). Biocompatible Collagen Nanofibrils: An Approach for Sustainable Energy Harvesting and Battery-Free Humidity Sensor Applications."},{"url":"https://doi.org/10.1002/adma.201802084","text":"Chorsi MT, Curry EJ, Chorsi HT, Das R, Baroody J, Purohit PK, Ilies H, Nguyen TD. (2018). Piezoelectric Biomaterials for Sensors and Actuators."},{"url":"https://doi.org/10.1002/adhm.201901287","text":"Azimi B, Milazzo M, Lazzeri A, Berrettini S, Uddin MJ, Qin Z, Buehler MJ, Danti S. (2019). Electrospinning Piezoelectric Fibers for Biocompatible Devices."},{"url":"https://doi.org/10.3390/polym17111579","text":"Xia Z, Liu C, Li J, Huang B, Pan C, Lai Y, Liu Z, Wu D, Liang S, Wang X, Yang W, Lu J. (2025). Toward Versatile Transient Electronics: Electrospun Biocompatible Silk Fibroin/Carbon Quantum Dot-Based Green-Emission, Water-Soluble Piezoelectric Nanofibers."},{"url":"https://doi.org/10.1088/1361-665x/ad9e5a","text":"Fadzallah IA, Sabran NS, Hassan HC, Ono T, Sabri MFM. (2024). Electrospun poly(vinylidene fluoride) nanofibers: a review on its utilization in energy harvesting devices."},{"url":"https://doi.org/10.1002/adma.201203852","text":"Nguyen TD, Mao S, Yeh Y, Purohit PK, McAlpine MC. (2013). Nanoscale Flexoelectricity."},{"url":"https://doi.org/10.1016/j.jmps.2019.05.018","text":"Deng Q, Ahmadpoor F, Brownell WE, Sharma P. (2019). The collusion of flexoelectricity and Hopf bifurcation in the hearing mechanism."},{"url":"https://doi.org/10.3390/bioengineering12060579","text":"Mohammadkhah M, Slavkovic V, Klinge S. (2025). Flexoelectricity in Biological Materials and Its Potential Applications in Biomedical Research."},{"url":"https://doi.org/10.1103/physrevlett.108.078103","text":"Liu Y, Zhang Y, Chow M, Chen QN, Li J. (2012). Biological Ferroelectricity Uncovered in Aortic Walls by Piezoresponse Force Microscopy."},{"url":"https://doi.org/10.1073/pnas.1402909111","text":"Liu Y, Cai H, Zelisko M, Wang Y, Sun J, Yan F, Ma F, Wang P, Chen QN, Zheng H, Meng X, Sharma P, Zhang Y, Li J. (2014). Ferroelectric switching of elastin."},{"url":"https://doi.org/10.1103/physrevlett.110.168101","text":"Liu Y, Wang Y, Chow M, Chen NQ, Ma F, Zhang Y, Li J. (2013). Glucose Suppresses Biological Ferroelectricity in Aortic Elastin."},{"url":"https://doi.org/10.1002/adfm.201103011","text":"Heredia A, Meunier V, Bdikin IK, Gracio J, Balke N, Jesse S, Tselev A, Agarwal PK, Sumpter BG, Kalinin SV, Kholkin AL. (2012). Nanoscale Ferroelectricity in Crystalline γ‐Glycine."},{"url":"https://doi.org/10.1002/adma.202522834","text":"Rabbi MF, Ahn JH, Vu DL, Ahn KK. (2026). Recent Advances in Electrospun Nanofibers for Triboelectric Nanogenerators: Performance Enhancement Strategies and Emerging Applications."},{"url":"https://doi.org/10.1038/s41467-021-24312-4","text":"Boschker HTS, Cook PLM, Polerecky L, Eachambadi RT, Lozano H, Hidalgo-Martinez S, Khalenkow D, Spampinato V, Claes N, Kundu P, Wang D, Bals S, Sand KK, Cavezza F, Hauffman T, Bjerg JT, Skirtach AG, Kochan K, McKee M, Wood B, Bedolla D, Gianoncelli A, Geerlings NMJ, Van Gerven N, Remaut H, Geelhoed JS, Millan-Solsona R, Fumagalli L, Nielsen LP, Franquet A, Manca JV, Gomila G, Meysman FJR. (2021). Efficient long-range conduction in cable bacteria through nickel protein wires."},{"url":"https://doi.org/10.1038/nature03661","text":"Reguera G, McCarthy KD, Mehta T, Nicoll JS, Tuominen MT, Lovley DR. (2005). Extracellular electron transfer via microbial nanowires."},{"url":"https://doi.org/10.1016/j.cell.2019.03.029","text":"Wang F, Gu Y, O’Brien JP, Yi SM, Yalcin SE, Srikanth V, Shen C, Vu D, Ing NL, Hochbaum AI, Egelman EH, Malvankar NS. (2019). Structure of Microbial Nanowires Reveals Stacked Hemes that Transport Electrons over Micrometers."},{"url":"https://doi.org/10.1002/marc.202500712","text":"Zhu L, Guo J, Li X, Feng Y, You R. (2025). Silk Fibroin‐Based Conductive Hydrogels for Flexible Electronic Devices."},{"url":"https://doi.org/10.1109/icsens.2007.4388455","text":"Krijnen G, Lammerink T, Wiegerink R, Casas J. (2007). Cricket Inspired Flow-Sensor Arrays."},{"url":"https://doi.org/10.1088/0964-1726/21/11/113001","text":"Tao J, Yu X(. (2012). Hair flow sensors: from bio-inspiration to bio-mimicking—a review."},{"url":"https://doi.org/10.1149/1945-7111/ad09fa","text":"Ramírez-González J, Sinclair DC, West AR. (2023). Impedance and Dielectric Spectroscopy of Functional Materials: A Critical Evaluation of the Two Techniques."},{"url":"https://doi.org/10.1021/acsami.3c04093","text":"Wang H, Chen X, Li J, Li M, Liu K, Yang D, Peng S, Zhao T, Zhao B, Li Y, Wang Y, Lin C, Yang W. (2023). Pressure- and Rate-Dependent Mechanoluminescence with Maximized Efficiency and Tunable Wavelength in ZnS: Mn2+, Eu3+."},{"url":"https://doi.org/10.1007/s42765-026-00686-2","text":"Yao Y, Wei X, Ge H, Zhou J, Zhang P, Xue Y, Zhou D, Sheng C, Zhu L, Xie Q, Hu L, Shen G, Wu H, Zhang Z, Xia C, Ramakrishna S. (2026). Interfacial Fusion Engineering Enables Scalable Single-Step Continuous Fabrication of Durable and Highly Sensitive Mechanoluminescent Fiber."},{"url":"https://doi.org/10.1002/anbr.202100020","text":"Sun J, Wang F, Zhang H, Liu K. (2021). Azobenzene‐Based Photomechanical Biomaterials."},{"url":"https://doi.org/10.1002/anie.202012848","text":"Sun J, Ma C, Maity S, Wang F, Zhou Y, Portale G, Göstl R, Roos WH, Zhang H, Liu K, Herrmann A. (2020). Reversibly Photo‐Modulating Mechanical Stiffness and Toughness of Bioengineered Protein Fibers."},{"url":"https://doi.org/10.1002/marc.202200063","text":"Ahmadi‐Nohadani H, Nono‐Tagne S, Barrett CJ, Otsuka I. (2022). Electrospun Azo‐Cellulose Fabric: A Smart Polysaccharidic Photo‐Actuator."},{"url":"https://doi.org/10.1039/c6tc02344d","text":"Molina-Mendoza AJ, Moya A, Frisenda R, Svatek SA, Gant P, Gonzalez-Abad S, Antolin E, Agraït N, Rubio-Bollinger G, Perez de Lara D, Vilatela JJ, Castellanos-Gomez A. (2016). Highly responsive UV-photodetectors based on single electrospun TiO 2 nanofibres."},{"url":"https://doi.org/10.3390/nano9010050","text":"Li G, Jiang Z, Wang W, Chu Z, Zhang Y, Wang C. (2019). Electrospun PAN/MAPbI3 Composite Fibers for Flexible and Broadband Photodetectors."},{"url":"https://doi.org/10.1007/s13233-024-00309-y","text":"Kim D. (2024). PEDOT:PSS-based high-performance thermoelectrics."},{"url":"https://doi.org/10.1021/acsnano.5c06297","text":"Yang Y, Cao Y, Li S, Wang Y, Zhang X, Li Y, Yang Z. (2025). Ultrastiff Bioinspired Protein–Carbon Nanotube Hybrid Sponge with Shape Memory Effects."},{"url":"https://doi.org/10.1038/s41586-020-2010-9","text":"Liu X, Gao H, Ward JE, Liu X, Yin B, Fu T, Chen J, Lovley DR, Yao J. (2020). Power generation from ambient humidity using protein nanowires."},{"url":"https://doi.org/10.1039/d1sm00181g","text":"Leighton MP, Kreplak L, Rutenberg AD. (2021). Chiral phase-coexistence in compressed double-twist elastomers."},{"url":"https://doi.org/10.1021/acsnano.0c03695","text":"Peacock C, Lee E, Beral T, Cisek R, Tokarz D, Kreplak L. (2020). Buckling and Torsional Instabilities of a Nanoscale Biological Rope Bound to an Elastic Substrate."},{"url":"https://doi.org/10.1007/bf00413693","text":"Copeland BJ. (1996). What is computation?."},{"url":"https://doi.org/10.1007/s00397-013-0686-6","text":"Ewoldt RH, Bharadwaj NA. (2013). Low-dimensional intrinsic material functions for nonlinear viscoelasticity."},{"url":"https://doi.org/10.3758/bf03212154","text":"Hollins M, Bensmaïa S, Karlof K, Young F. (2000). Individual differences in perceptual space for tactile textures: Evidence from multidimensional scaling."},{"url":"https://doi.org/10.1038/s41467-026-69251-0","text":"Chikamoto A, Meng M, Gracheva EO, Bagriantsev SN. (2026). Velocity sensitivity of mechanotransduction in the afferent terminal underlies vibration detection in the Pacinian corpuscle."},{"url":"https://doi.org/10.1109/tnn.2010.2089641","text":"Rodan A, Tino P. (2011). Minimum Complexity Echo State Network."},{"url":"https://doi.org/10.1103/physrevlett.69.3717","text":"Molgedey L, Schuchhardt J, Schuster HG. (1992). Suppressing chaos in neural networks by noise."},{"url":"https://doi.org/10.1016/j.physd.2020.132609","text":"Ceni A, Ashwin P, Livi L, Postlethwaite C. (2020). The echo index and multistability in input-driven recurrent neural networks."},{"url":"https://doi.org/10.1017/9780511734809","text":"Bechhoefer J. (2021). Control Theory for Physicists."}],"slug":"perspective-computational-fibers-white-paper","social_posts_count":null,"social_posts_embed_src":null,"state":"PUBLISHED","subtitle":"A white paper, Impossible Fibers 2026","tags":["Perspective"],"title":"Computational Fibers","version_desc":null,"version_number":1,"versions":[{"id":540,"version_number":1,"version_desc":null,"doi":"10.82153/dnak-dz90.1","created_at":"2026-11-18T12:47:31.732Z"}]}}